1. en1208pci.exe Driver
2. WIN98.TXT File Contents

WIN98.TXT Driver File Contents (en1208pci.exe)

*******************************************************************
*                  ACCTON TECHNOLOGY CORPORATION                  *
*                   EN1208 PCI ETHERNET ADAPTER                   *
*          WINDOWS 98 NDIS4 MINIPORT DRIVER INSTALLATION          *
*                                                                 *
*         Copyright (C) 1998 Accton Technology Corporation        *
*                       All Rights Reserved.                      *
*******************************************************************

The driver (EN1208.SYS) contained in the directory WIN98 is for
the following Accton PCI Ethernet adapter:

        Accton's EN1208 PCI Ethernet Adapter

The driver (EN1208.SYS) conforms to the Network Driver Interface
Specification (NDIS) 4.0, and is used with Microsoft Windows 98.


  Contents:
  ---------

   (A) Installing the NDIS4 Miniport driver on Microsoft Windows 98
   (B) Configuring the NDIS4 Miniport driver on Microsoft Windows 98

(A) Installing the NDIS4 Miniport driver on Microsoft Windows 98
=================================================================

    1. Plug Accton's EN1208 adapter into one of the Master PCI
       slots of your PCI platform.
    2. Turn the power ON, then boot from Windows 98.
    3. When Windows 98 prompts with "PCI Ethernet Controller" in the
       "New Hardware Found" dialog box, click the "Next" button.
    4. Select "Search for the best driver for your device (Recommended)"
       form the "Add New Hardware Wizard" dialog box, then click the
       "Next" button.
    5. Insert the Accton EN1208 Driver Diskette in your floppy drive.
    6. Select "Specify a location" and type Path "A:\WIN98" in the
       "Add New Hardware Wizard" dialog box, then click the "Next" button.
    7. Click the "Next" button in the "Add New Hardware Wizard" dialog box.
    8. Windows 98 will prompt with "Accton EN1208 PCI Ethernet Adapter"
       in the "Add New Hardware Wizard" dialog box.
    9. Click the "Next" button in the "Add New Hardware Wizard" dialog box, then
       Windows 98 will copy the driver (EN1208.SYS) from A:\WIN98
       to the C:\WINDOWS\SYSTEM directory, and the EN1208.INF file from A:\WIN98
       to the C:\WINDOWS\INF directory.
   10. When Windows prompts with "Accton EN1208 PCI Ethernet Adapter"
       in the "Add New Hardware Wizard" dialog box, click the "Finsh" button.
   11. Remove the Accton EN1208 Driver Diskette from your floppy drive.
   12. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows 98
                O.S. is located.


(B) Configuring the NDIS4 Miniport driver on Microsoft Windows 98
====================================================================

    1. Click the "My Computer" icon in the Main Program Group.
    2. Click the "Control Panel" icon in the My Computer window.
    3. Click the "Network" icon in the Control Panel window.
    4. Select the "Accton EN1208 PCI Ethernet Adapter" item
       from the "Network" dialog box, then click the "Properties" button.
    5. Click the "Advanced" button in the "Accton EN1208 PCI Ethernet
       Adapter Properties" dialog box.
    6. Click the OK button in the "Network" dialog box.
    7. Restart your computer to implement the new configuration.


Trademarks:
Microsoft Windows 98 is a trademark of Microsoft Corporation.

===End of File===