README.TXT Driver File Contents (en1208pci.exe)

							       07/28/1995
		      SCO UNIX Stream Driver for
		Accton EN1208 PCI Adapter Installation
	 ==================================================


The following files will be used in this installation:

Files	       Contents
-----------    -----------------------------------------
readme.txt     this document file
driver.o       Accton EN1208 PCI Adapter Driver Program
setup	       Transfer dos format to unix format setup program
info
init
master
node
reconf
remove
space.c
system
dummy.o
Mkdev
install
install.ID
install.sco
make
macstat.h
---------------------------------------------------------



1. Login as root user. (In maintenance mode)

2. Put Accton EN1208 SCO UNIX Driver diskette to floppy A: and use doscp
       command to copy EN1208 SCO UNIX PCI Driver into UNIX's directories.

       # cd /
       # doscp A:/sco/setup /setup
       # chmod +x /setup
       # ./setup

 3.

       # cd /pci
       # ./install

4. Do you wish to install or delete the Accton EN1208 driver (i/d/q)   type 'i'

5. Do you want to install another Accton EN1208 board? (y/n/q) 	type 'n'

6. Enter IP Address :	     (For example : 192.72.24.174)

7. Enter broadcast address [192.72.24.255] :

8. Enter netmask		 (default 255.255.255.0)

9. Do you want to (I)nstall , (R)evise or (S)kip the
   pci0 driver IP configuration ? (i,r,s)	  type 'i'

10. Do you want to relink to kernel now ?	       'y'

11. Do you want to reboot now ? (y/n/q) 	       'y'

12. Shutdown started.

    Do you want to continue ? (y or n): 	       'y'

13. ... a sequence of shutdown process, then the message

    **** Safe to Power off   *****
	      - or -
    *** Press Any Key to Reboot ****  (Press any key)

14. Boot :					  (Press the 'enter' key)

15. The following lines should appear on the screen :

    %ethernet 0x6000-0x601F   10  - type=Accton EN1208 PCI Ethernet Adapter

16. Type CONTROL-d to proceed with normal startup,
    (or give root password for system maintenance):	(CONTROL-d)

17. After the process of 'Starting TCP/IP: .....',
    the network adapter is initiated.

--- End of File ---
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.79