README.TXT Driver File Contents (en1208pci.exe)

        Accton EN1208 PCI Ethernet Adapter
        NetWare OS2 ODI Driver Installation
    ===========================================

Driver Installation for Novell NetWare OS/2 ODI
===============================================

Requirements:
-------------
Before you start with  the installation  process  make
sure you have the following:

a.   Accton EN1208 PCI Ethernet Adapter Driver Diskette
b.   Novell NetWare OS/2 WORKSTATION SERVICES REQUESTER diskette.
c.   Novell NetWare OS/2 WORKSTATION OS/2 Utility - 1
d.   Novell NetWare OS/2 WORKSTATION OS/2 Utility - 2
e.   Novell NetWare OS/2 WORKSTATION OS/2 Utility - 3


Installation Procedure
----------------------
You need this file to acquire network service after installing OS/2
Requester and Utilities.

EN1208.SYS ----- supported by Accton

1. The directory OS2ODI contains only an OS/2 driver,(EN1208.SYS).
   This driver must be used with the OS/2 requester to establish
   networking operations.

2. Make sure that the workstation on which you want to
   install the Requester is a 286 or 386 machine that
   will run OS/2 or Extended Edition OS/2. Please refer to
   'Novell NetWare Requester for OS/2' documentation for
   a detailed Requester and Utilities installation guide.

3. After installation, copy the EN1208.SYS file into the NETWARE
   subdirectory of your hard disk.

4. Add or replace the EN1208.SYS file in the CONFIG.SYS file.
   Make sure that it comes before the IPX.SYS command line.
   The following shows the corresponding command sequence:

   DEVICE=C:\NETWARE\LSL.SYS          ; OS/2 Requester supported
   DEVICE=C:\NETWARE\DDAEMON.SYS      ; OS/2 Requester supported
   DEVICE=C:\NETWARE\EN1208.SYS       ; Accton supported
   DEVICE=C:\NETWARE\IPX.SYS          ; OS/2 Requester supported

5. Reboot your system to start network service.

Installation note:
------------------
You can bind several frame types to the IPX protocol to support
various configurations. Include this in the Link Driver EN1208
section of the NET.CFG file. A sample is shown below:

        Link Driver EN1208

        frame Ethernet_802.3
        frame Ethernet_802.2
        frame Ethernet_II
        frame Ethernet_snap

        protocol IPX 00 Ethernet_802.3



TRADEMARKS
==========
All trademarks or brand names mentioned are trademarks of their
respective companies.

==End==

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.21