********************************************************************** * Accton Technology Corporation * * EN1208 PCI ETHERNET ADAPTER * * NetWare Server Driver Installation Overview * * * * Copyright (C) 1998 by Accton Technology Corporation. * * All rights reserved. * ********************************************************************** Contents: A. File Description B. Driver Installation for NetWare Server 3.1x, 4.x C. Parameter Description for ACCODI.LAN A. File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- SERVER.TXT This file. Presents a summary of the contents for NetWare Server driver installation. 1208ODI.LAN Accton's 32-Bit ODI Server driver for EN1208 This driver complies with NetWare ODI Server driver SPEC 3.31. 1208ODI.LDI The (1208ODI.LAN) driver installation information file for NetWare Server 4.X, NeDOS32, Windows 3.x. ETHERTSM.NLM NetWare Server 3.1X, 4.X LAN driver Topology Specific Module (TSM) for Ethernet. 3.1X\NBI31X.NLM NetWare Server 3.1X Bus Interface module. 3.1X\MSM31X.NLM NetWare Server 3.1X LAN driver Media Support Module (MSM). 4.X\MSM.NLM NetWare Server 4.X LAN driver Media Support Module (MSM). ------------------------------------------------------------------------------- B. Driver(Spec. 3.31) Installation for NetWare Server 3.1x, 4.x B.1 Driver Installation for NetWare Server 3.12 1. Insert Accton's EN1208 Driver Diskette in your PC's floppy drive (A: or B:). 2. Change to the NetWare Server directory (for example: CD\SERVER.312) 3. Copy the following files from Driver Diskette to the NetWare Server directory. \NETWARE\ODI\SERVER\3.12\NBI31X.NLM \NETWARE\ODI\SERVER\3.12\MSM31X.NLM \NETWARE\ODI\SERVER\ETHERTSM.NLM \NETWARE\ODI\SERVER\1208ODI.LAN 4. Sample AUTOEXEC.NCF for NetWare Server 3.12 AUTOEXEC.NCF ============ LOAD C:NBI31X LOAD C:MSM31X LOAD C:ETHERTSM LOAD C:1208ODI FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:1208ODI FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:1208ODI FRAME=ETHERNET_II NAME=E_II LOAD C:1208ODI FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 B.2 Driver Installation for NetWare Server 4.X 0. Copy the following files from the Driver Diskette to the NetWare Server directory. \NETWARE\ODI\SERVER\4.X\NBI.NLM \NETWARE\ODI\SERVER\4.X\MSM.NLM \NETWARE\ODI\SERVER\ETHERTSM.NLM \NETWARE\ODI\SERVER\1208ODI.LAN 1. Change to NetWare Server directory (for example: CD\NWSERVER ) 2. Load the NetWare Server System by typing SERVER, then press <Enter>. 3. When the Server prompt appears, load the NetWare Server Installation Utility. That is, :LOAD INSTALL 4. Select "Driver options" from the "Installtion Options" menu, then press <Enter>. 5. Select "Configure network drivers" from the "Driver Options" menu, then press <Enter>. 6. Select "Select a driver" from the "Additional Driver Actions" menu, then press <Enter>. 7. Press <Ins> to install an unlisted driver, then press <F3> to specify a different path. 8. Insert Accton's EN1208 Driver Diskette in your PC's floppy drive and specify the path A:\NETWARE\SERVER. 9. Select "Accton EN1208 PCI Ethernet Adapter Driver" from the "Select a driver to install:" menu, then press <Enter>. 10. If necessary, select "Select/Modify driver parameters and protocols" from the "Board EN1208_1 (Driver 1208ODI) Actions" menu, then press <Enter> to set up the driver parameters. (Please refer to content D.) Otherwise, select "Save parameters and load driver", then press <Enter>. 11. Follow instructions to complete driver installation. 12. Sample AUTOEXEC.NCF for NetWare Server 4.x AUTOEXEC.NCF (one board) ======================== LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:1208ODI FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:1208ODI FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:1208ODI FRAME=ETHERNET_II NAME=E_II LOAD C:1208ODI FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:1208ODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:1208ODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:1208ODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:1208ODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:1208ODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:1208ODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:1208ODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:1208ODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 C. Parameter Description for 1208ODI.LAN The following parameters are used in 1208ODI.LAN. 1. SLOT : Specifies which adapter is enabled when multiple EN1208 adapters are found in your computer. The SLOT keyword is an index value corresponding to PCI BIOS. The mapping from SLOT to physical PCI slot is different from one machine to another. Ex: LOAD 1208ODI SLOT=3 FRAME=ETHERNET_802.2 LOAD 1208ODI SLOT=4 FRAME=ETHERNET_II 2. FRAME : Specifies which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Multiple frame types can be enabled by loading the same driver with different FRAME types. Ex: LOAD 1208ODI FRAME=ETHERNET_802.2 LOAD 1208ODI FRAME=ETHERNET_802.3 LOAD 1208ODI FRAME=ETHERNET_II LOAD 1208ODI FRAME=ETHERNET_SNAP 3. NODE : Use a different address to replace the node address burned in EEPROM. Ex: LOAD 1208ODI NODE=0000E8001122 --- All trademarks and brand names mentioned belong to their respective owners. -- End of File --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.