LANMAN.TXT Driver File Contents (en1208pci.exe)

                    Accton EN1208 PCI Ethernet Adapter
                 NDIS DRIVER FOR LAN MANAGER INSTALLATION
                 ========================================

The EN1208 driver in the MSLANMAN.DOS directory conforms to the
Network Driver Interface Specification (NDIS) defined by Microsoft/3Com.


NDIS Driver Installation on LAN Manager v2.0
--------------------------------------------
1.  Type "Setup" in the LAN Manager directory and press <Enter>.

2.  Choose "Import Network Drivers..." in the "Action" field.
    Press <Enter> to continue.

3.  Insert your driver diskette into either drive A: or B:, Then
    press <Enter> to see the list of Imported Network Drivers.

4.  Press the <Space bar> to select the appropriate Network Adapter, i.e.
    "Accton EN1208 PCI Ethernet Adapter" for the PCI Ethernet adapters.
    Then press <Enter> to confirm your choice.

5.  Follow screen instructions to complete the process, until the Network
    Driver appears onscreen.

6.  Identify your Network Adapter if asked. For example, select "Accton
    EN1208 PCI Ethernet Adapter" to confirm any EN1208 PCI Ethernet Adapter.

7.  Select the <Add driver> and the <Add protocol> options. Then select <OK>
    to confirm your choices. The Workstation's primary parameters should
    appear onscreen.

8.  Respond to all prompts issued onscreen to complete the process.
    Select <OK> to confirm a choice.

9.  Save all selections. Choose "Save" from the "Action Menu."
10. Press <F3> to exit.


NDIS Driver Installation on LAN Manager v2.1
--------------------------------------------

1.  Type lmsetup in the LAN Manager directory and press <Enter>.
    The Microsoft LAN Manager Setup screen should appear.

2.  Choose "Network Drivers..." in the "Configuration" field. Press
    <Enter> to confirm your choice.

3.  Choose <Add New Configs> and press <Enter> to display a list of
    Network Adapter Drivers.

4.  Choose <Other Driver> and press <Enter>.

5.  Insert the Driver Diskette into drive A: or B: of your PC. Indicate
    the drive location of the diskette and select <OK> to proceed.

6.  Select the appropriate Network Adapter Driver from the list.  Example:
    select "Accton EN1208 PCI Ethernet Adapter"
    Select <OK> to confirm your choice.

7.  Select an appropriate protocol. Use the <Space bar> to highlight your
    choice.

8.  Select <OK> to confirm your choice. A "Configuration Complete" message
    should appear onscreen.

9.  Select <Save> to save the configuration.

10. Press <F3> to exit.

NDIS Driver Installation on LAN Manager v2.2
--------------------------------------------
1.  Type setup in the LAN Manager directory and press <Enter>. The Microsoft
    LAN Manager Setup screen should appear.

2.  Choose "Network Drivers" from the "Configuration" field. Press <Enter>
    to confirm your choice.

3.  Choose <Add New Config> and press <Enter> to display a list of Network
    Adapter Drivers.

4.  Choose <Other Driver> and press <Enter>.

5.  Insert the Driver Diskette into drive A: or B: of your PC. Indicate
    the drive location of the diskette and select <OK> to proceed.

6.  Select the appropriate Network Adapter Driver from the list.  Example:
    select "Accton EN1208 PCI Ethernet Adapter"
    Select <OK> to confirm your choice.

7.  Select an appropriate protocol. Use the <Space> bar to highlight your
    choice. If you have chosen the TCP/IP protocol, you will be prompted
    for the IP address, the subnet mask, and the default gateway (router).
    By default, the workstation number of NetBios session is set to 6.
    Please consult Microsoft LAN Manager Installation Manual for more
    details, or use the online help.

8.  Select <OK> to confirm your choice. A "Configuration Complete" message
    should appear onscreen.

9.  Select <Save> to save the configuration.

10. Press <F3> to exit.

Summary
-------
If you are installing the LAN Manager for the first time,  you will be
prompted for default user name and domain of the workstation, as well as
for the questions concerning the Windows environment and memory management.
Just follow the instructions on the screen.

Sample Configuration Files
--------------------------

// LAN Manager 2.0

// CONFIG.SYS File

        LASTDRIVE=Z
        BUFFERS = 35
        FILES = 35
        SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
        DEVICE=C:\HIMEM.SYS
        DEVICE=C:\DOS50\SETVER.EXE
        DOS=HIGH,UMB
        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
        DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\EN1208\EN1208.DOS
        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS

// PROTOCOL.INI File

        [PROTOCOL MANAGER]
         DRIVERNAME = PROTMAN$
        [NETBEUI_XIF]
         Drivername = netbeui$
         BINDINGS = "EN1208_NIF"
        [EN1208_NIF]
          DriverName = EN1208$
          Slot = 1

// AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS50;C:\NC;
        APPEND=C:\PE2;C:\DOS50;
        REM === LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
        REM === LANMAN 2.0 ===
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
        NET START WORKSTATION
        REM === LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
        REM === LANMAN 2.0 ===

// LAN Manager 2.1 or LAN Manager 2.2

// CONFIG.SYS File

        LASTDRIVE=Z
        BUFFERS = 35
        FILES = 35
        SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024
        DEVICE=C:\HIMEM.SYS
        REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS
        DEVICE=C:\DOS50\SETVER.EXE
        DOS=HIGH,UMB
        DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
        DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\EN1208\EN1208.DOS

// PROTOCOL.INI File

        [PROTMAN]
         DRIVERNAME = PROTMAN$
         DYNAMIC = YES
         PRIORITY = NETBEUI
        [NETBEUI_XIF]
         Drivername = netbeui$
         SESSIONS = 6
         NCBS = 12
         BINDINGS = "EN1208_NIF"
         LANABASE = 0

        [EN1208_NIF]
          DriverName = EN1208$
          Slot = 1

// AUTOEXEC.BAT File

        @echo off
        PROMPT $P$G
        PATH=c:\PE2;C:\DOS50;C:\NC;
        APPEND=C:\PE2;C:\DOS50;
        @REM === LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM === LANMAN 2.1 ===
        SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
        NET START WORKSTATION
        LOAD NETBEUI
        @REM === LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
        @REM === LANMAN 2.1 ===

-----
All trademarks or brand names mentioned are trademarks or registered
trademarks of their respective companies.

---End of this File
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.55