README.TXT Driver File Contents (en1208pci.exe)

                        Accton Technology Corporation
                Netware Client32 Driver Installation Overview
                =============================================



Contents:
        A. File Description
        B. Driver Installation for DOS32
        C. Driver Installation for Microsoft Windows 3.x
        D. Driver Installation for Microsoft Windows 95


A. File Description
--------------------

-------------------------------------------------------------------------------
Filename        Description
-------------------------------------------------------------------------------
README.TXT      This file. Presents a summary of the contents for
                Netware Client32 driver installation.

1208ODI.LAN     Client32 ODI driver for Accton 10Mbps PCI Bus Ethernet Adapter.
                This driver complies with Netware ODI Server driver SPEC 3.3.

1208ODI.LDI     Driver (1208ODI.LAN) installation information file for
                Netware Server 4.11, DOS32, Microsoft Windows 3.x.

1208ODI.INF     Driver (1208ODI.LAN) installation information file for
                Microsoft Windows 95.

-------------------------------------------------------------------------------

B. Driver Installation for DOS32

     1. If you have finished installing the Netware Client 32 for DOS,
        all you have to do is modify STARTNET.BAT.  Please see the
        sample STARTNET.BAT below.
        If not, please follow step 2 - step 7 shown below.

    Sample STARTNET.BAT is as follow:

SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\1208ODI.LAN FRAME=Ethernet_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
C:

     2. Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware
        4.11 CD). When the product menu appears,  mark the
        "Netware Client 32 for DOS" item, then press <Enter>.

     3. Select "OTHER DRIVERS" item from the "32-bit Network Board Drivers"  
        menu, then press <Enter>.

     4. Select "USER SPECIFIED 32 BIT DRIVER."  Press <Enter>.

     5. Insert Accton's 10Mbps PCI Bus Ethernet Adapter Driver Diskette
        into your floppy diskette drive, then specify
        the driver path like A: or B:.

     6. Follow instructions to complete the Client32 for DOS software
        installation.

    7. Reboot your machine.


C. Driver Installation for Microsoft Windows 3.x

    Please refer to Content B., in step 2, mark "Netware Client 32 for DOS"
    and "Client 32 for Windows"; in step 5, specify the driver path like
    A:\LANDRV32 or B:\LANDRV32. then follow steps 3..7
    to complete installation.


D. Driver Installation for Microsoft Windows 95

    If you have installed the Microsoft Client in your Windows 95 system,
    you should remove the adapter object and NDIS 2/3 driver of the
    adapter from the Windows 95 system.  If you have installed a previous
    Accton 10Mbps PCI Bus Ethernet Adapter NDIS 2/3 driver,
    you should take the following steps before installing
    the Accton's 10Mbps PCI Bus Ethernet Adapter Client32 driver.


     D.1 Remove the previously installed adapter object & driver for
         Accton's 10Mbps PCI Bus Ethernet Adapter, if any.
     ==============================================================
      1. Click the "My Computer" icon in the Main Program Group.
      2. Click the "Control Panel" icon in the My Computer window.
      3. Click the "System" icon in the Control Panel window.
      4. Click the "Network adapter" icon in the System window.
      5. Click the "Accton 10Mbps PCI Bus Ethernet Adapter"
         icon in the System window.
      6. Click the <Remove> button, then click the <OK> button.
      7. Close the opened windows.



     D.2 Client 32 Driver Installation on Windows 95
     ===============================================

      8. Plug Accton's 10Mbps PCI Bus Ethernet adapter into one
         of the PCI slots of your PC machine.
      9. Turn the power on to bootup Windows 95.
     10. Windows 95 will then prompt with "Accton 10Mbps PCI Bus
         Ethernet Adapter" in the New Hardware Found dialog box.
     11. Follow the instructions to complete installation.

         Note: Windows 95 will ask you to key in the proper path of
               the following diskette:

             a. Netware Client 32 for Windows 95 Disk,
             b. PCI-Bus Ethernet Adapter Driver Diskette
                --> Insert Driver Diskette,
                then, assign the path to A:\LANDRV32 or B:\LANDRV32
             c. Windows 95 CD-ROM

-- End of File --
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.14