NOTES ON THE HP DESKJET CONTROL PANEL FOR DOS, VERSION 2.6
==============================================================
(15/05/2000)
NOTE: To print this file, enter "PRINT README2.TXT"
at the DOS (C:\DJ1125C>) prompt. (The default [PRN]
is LPT1. If you have connected the printer to another
port, enter that port in the command line, for example,
LPT2 for parallel port 2).
=============================================================
CONTENTS
=============================================================
Using the DeskJet Control Panel
Command Line Switches
Known Problems
=============================================================
USING THE DESKJET CONTROL PANEL
=============================================================
ACCESSING THE CONTROL PANEL
---------------------------
To access the Control Panel, type "DJCP" at the DOS
(C:\DJ1125C>) prompt.
If the \DJ1125C directory is in your PATH, you can
access the Control Panel from any directory.
==============================================================
COMMAND LINE SWITCHES
==============================================================
/Px Specifies the parallel port to which the printer is
connected. Valid values for "x" are 1, 2, or 3. If this
switch is not included, the Control Panel will default
to the port it used the last time you ran the Control
Panel (or the value set during installation if you have
not used the control panel before).
/? Displays help about using the DJCP command.
/H Displays help about using the DJCP command.
/M Changes the colors used in the Control Panel to be
compatible with monochrome displays.
Example: To select the printer on parallel port 2 (lpt2),
type "DJCP /P2" at the DOS (C:\>) prompt.
==============================================================
KNOWN PROBLEMS
==============================================================
Changing Print Settings While a Document is Printing
----------------------------------------------------
If print settings are changed through the Control Panel
while a document is currently printing, the printout may
be corrupted, and the printer may not receive the new
settings.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.