3Com Corporation 3CCFE574BT 10/100 LAN PC Card 3CXFE574BT 10/100 LAN PC Card NDIS 2.01 Drivers Installation Notes Banyan VINES ------------ To install VINES 6.0 software on a DOS NDIS workstation, follow these instructions. DOS must be installed on the target workstation C: drive, or you must have a bootable DOS floppy. You also need the interrupt request level (IRQ) used by the LAN card. 1. Use the DOS MD command to create a subdirectory called \VINES. 2. Copy the contents of the VINES LAN S/W (DOS) Install diskette into the \VINES subdirectory. 3. Copy the contents of the NDIS subdirectory on the VINES LAN S/W (DOS) 2 of 2 diskette into the \VINES subdirectory. 4. Copy the EL3C574.DOS from A:NDIS2 on the Installation disk to the C:\VINES subdirectory. 5. Copy the PROTOCOL.INI fragment from the \MSLANMAN.DOS\DRIVERS\ETHERNET\EL3C574 subdirectory on the Installation disk to the \VINES subdirectory. 6. Edit the PROTOCOL.INI file to read as follows: [PROTOCOL MANAGER] DRIVERNAME = PROTMAN$ [VINES_XIF] DRIVERNAME = NDISBAN$ BINDINGS = EL3C574 [EL3C574] DRIVERNAME = EL3C574$ 7. Run the PCCONFIG.EXE program located in the \VINES subdirectory. 8. Select option 1, Network Card Settings. 9. Select the NDIS Ethernet option. 10. The NDIS workstation screen appears. Enter the IRQ that you selected for the LAN card. 11. Press F10 twice to return to the first menu. 12. On the next screen, select option 2, Login Environment Settings. 13. On the next screen, select option 1, Default Communications Driver. 14. In the next screen scroll down to NDIS Ethernet and press enter. 15. Exit PCCONFIG by pressing [F10] to save the new configuration. 16. Edit the CONFIG.SYS file and add the following lines, substituting A: for C: for a floppy disk installation. DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES DEVICE = C:\VINES\EL3C574.DOS LASTDRIVE = M 17. Edit the AUTOEXEC.BAT file and add the following lines: CD\VINES BAN CD\ BAN loads the NDISBAN drivers and reads the PCCONFIG.OBJ file to invoke changes made during the PCCONFIG stage. If you are not using Card Services and you are using a memory manager, you must exclude the CIS memory range for the LAN card and other Card Service devices. %VER 1.000.001Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.