+++++++++++++++++++++++++++++++++ ++++ ++++++++++++++++++++++++++++++++++++ +++++++ +++++++++++++++++++++++++++++++++++++ ++++++++ ++++++++++++++++++++++++++++++++++++ ++++++++ ++++++++ ++++++++ +++++++++++++++++++++++++++ ++++++++ +++++++++++++++++++++++++++++ ++++++++ +++++++++++++++++++++++++++++ ++++++++ +++++++++++++++++++++++++++ ++++++++ ++++++++ ++++++++ ++++++++++++++++++++++++++++++++++++ ++++++++ +++++++++++++++++++++++++++++++++++++ ++++++++ ++++++++++++++++++++++++++++++++++++ ++++++++ +++++++++++++++++++++++++++++++++ +++++ (C)Copyright 1995-1997 SysKonnect, a business unit of Schneider & Koch & Co. Datensysteme GmbH. All rights reserved ========================================================================== dskfp.README Readme File for dskfp SK-NET FDDI PCI Diagnostics v4.07 (970926) September 26, 1997 Version / Date of the referred subject: dskfp v4.07 / 26-Sep-1997 This file contains (1) Overview (2) Supported Adapters (3) Command Line Options (4) How to use the Diagnostics Program (5) List of Error Numbers (6) History =========================================================================== (1) OVERVIEW ============ This README explains how to use the program dskfp to test your network adapter. Chapter 2 contains a list of all network adapters that are supported by this program. Chapter 3 describes the command line options that can be used when starting the Diagnostic program. Chapter 4 explains how to use the Diagnostic program to test your network adapter. *** (2) SUPPORTED ADAPTERS ====================== The program dskfp supports the following network adapters: *) SK-NET FDDI PCI series *** (3) COMMAND LINE OPTIONS ======================== The program dskfp is a diagnostic application. It cannot be started from the command line. The recommended execution environment is the diagnostic controler. *** (4) HOW TO USE THE DIAGNOSTICS PROGRAM ====================================== In order to test your adapter please follow the following steps: Step 1: Install the diagnostic application and its prerequisites. Step 2: Start the diagnostic controller by typing 'diag'. Step 3: Select the test method you want to use. (For a detailed description of all options please refer to the AIX documentation) Step 4: Select the adapter you want to test. The diagnostic application dskfp is then automaticaly started. Step 5: Look for a result message. NOTE: - The diagnostic application may take up to 5 minutes. *** (5) LIST OF ERROR NUMBERS ========================= The following is a list of error codes which could be displayed in case of a malfunctioning adapter: 201 Config register test failure. 202 PROM check test failure. 203 Timer and IRQ test failure. 204 Adapter RAM check Failure. 205 ASIC test failure. 206 High memory (ISA) test failure. 207 RAM check via DMA test failure. 208 FORMAC register test failure. 209 PLC1 test failure. 210 PLC2 test failure. 211 FORMAC Ring_Op test failure. 212 Send long frame test failure. 213 Restricted Token Monitor test failure. 214 Receive queue handling test failure. 215 FORMAC loopback test failure. 216 FORMAC loopback with master access test failure. 217 DMA measurement test failure. 218 Special test failure. 219 Bypass test failure. 301 PLC1 FDDI external wrap failure. 302 PLC2 FDDI external wrap failure. 303 Send long frame FDDI external wrap failure. 304 FORMAC loopback external wrap failure. 700 Error log analysis indicates hardware failure. *** (6) HISTORY =========== v4.07 New features: None. Problems fixed: - On machines with shared interrupts the error 211 could occur. Known limitations: None. v4.06 New features: - The DA now works with AIX 4.3 and 64 bit hardware. Problems fixed: - On fast machines the error 204 could occur. Known limitations: None. v4.05 New features: None. Problems fixed: - Fast machines could hang in SYSINTR occasionaly. - On fast systems the errors 209 and 210 could appear occasionaly. - Now react on SIGTERM and SIGABRT. - Change wrap plug part numbers. - Test ASIC more effective. Known limitations: None. v4.04 New features: None. Problems fixed: - On fast systems the error 218 could appear occasionaly. Known limitations: None. v4.03 New features: - Messages of the advanced diagnostic mode are changed. Problems fixed: - The advanced diagnostic takes up to 12 minutes. This is now stated in the message which is shown during the test. Known limitations: None. v4.02 New features: None. Problems fixed: - Error 211 happened sometimes on MP machines. - The DA could cause a SYSINTR when running on multiple adapters at the same time (only on MP machines). - There was a problem when stopping the DA immediately after starting. Afterwards the DA could not be started again. - On fast systems the error 301 and 302 could appear sometimes. Known limitations: None. v4.01 Rev. A New features: None. Problems fixed: - Diagnostic Application now runs with Standalone Diagnostics, too. Known limitations: None. v4.01 New features: None. Problems fixed: - FORMAC register test fixed. - Reduced test time in regular mode to 5 minutes. - PLC test under heavy load fixed. Known limitations: None. v4.00 New features: None. (First Release) Problems fixed: None. (First Release) Known limitations: None. *** End of information file ***Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.