1. uhdl_f101.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (uhdl_f101.zip)

******************************************************************************

                        UHDL Series Firmware Ver1.01

                Copyright (C) 2002-2004 I-O DATA DEVICE,INC.

******************************************************************************


Thank you for choosing I-O DATA UHDL series.
This document will provide the important information for you.
Please read all with the online manual before updating.


[ UHDL Series Firmware Items ]
    \
    README.TXT          This document
    UPDATE.TGZ          System Update File

[ Supported OS ]
    UHDL supports operating systems.

[ This Version Release Note ]
1. Support MPEG2-TS file, add file extension "TS" ,"M2T" and "TRP".
2. Change Firmware Version and Copyright.

[ Notice ]
  - This firmware is for I-O DATA UHDL series only.
  - Check a UHDL series product working well before updating.
  - Check other computers access to UHDL series.
  - We recommend to connect ONLY between UHDL series and your updating computer
    for safe updating.
  - This updating needs few data space (10-20MB) in UHDL series.
    If your UHDL is full, you need to delete some files before.
  - Update the firmware correctly by following the on-screen instructions.
    The firmware has been updated when the POWER lamp on the UHDL stops blinking
    and turns to a steady light.
  - Setup window may not be updated after the firmware updating. This means your
    internet browser software (ex: Microsoft Internet Explorer) may keep a
    temporary file. In this case, you need to delete all temporary files by your
    browser software.
  - Also read the online manual: http://www.iodata.com/manuals/uhdl-u/htm/setup24.htm

[ Update Firmware instruction ]

1. Open UHDL Series setup menu with Internet browser.    eg. URL is http://uhdl
2. Select setup "for Administrator".
3. Enter user name "admin" for logon UHDL Series.
4. Choose "Detail Setup" in Expert Mode.
5. Choose "Update Firmware" 
6. Enter Firmware folder and file name "update.tgz"
   * Any 2byte textures cannot be accepted.
7. Click 'update' button.
8. Click 'OK' button
9. System will re-boot after updating.


******************************************************************************