;Drivername DriverName = "L100$" ;MEDIA_MODE select the connect type of the adapter ; TP_10 10MB ; TP_10_FD 10MB+Full Duplex ; TP_100_FD 100MB+Full Duplex ; TP_100 100MB ; AUTODETECT autodetect by the driver,default value MEDIA_MODE=AUTODETECT ;TX_BUFS Tx descriptor numbers, default 4,less then 8 TX_BUFS=4 ;RX_BUFS Rx descriptor numbers, default 4,less then 8 RX_BUFS=4 ;-->SLOT=8 ; ; BUSNO=n, n=0..7 specifies the PCI bus number to search for the adapter. ; In most computers today there is only a single PCI bus, number 0. ; However, the PCI archixtecture allow for multiple PCI busses. If this ; keyword isn't specified, the driver will search all busses for a ; adapter, so this keyword isn't required unless there are multiple ; my Ethernet Adapters in the computer. ; NETADDRESS = "123456789012" ; ;This parameter overrides the network address of the network ;adapter card. The value of this parameter is a hexadecimal string of ;12 digits, as in 123456789012. The address must be unique among all ;other network adapter addresses on the network.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.