* Driver Installation for Windows ME
Note: This guide is intended as an installation guide for all of USB 2.0
Drivers. The snapshots and text may refer to the PCI to USB Enhanced Host
Controller, this is just used to simplify the guide. Depending upon your
hardware you could be seeing one of the following:
* Driver Installation Guide Format
This guide is laid out in four sections: Reinstalling Drivers for Windows ME,
New Driver Installation for Windows ME, Updating Drivers for Windows ME,
and Verifying Driver Installation for Windows ME.
Reinstalling Drivers for Windows ME: Use these instructions if you already
have an USB 2.0 Controller installed in your system, but have not yet
installed the USB 2.0 driver.
Updating Drivers for Windows ME: Use these instructions if you are already
using the USB 2.0 Controller and driver and want to upgrade the driver to the
latest version.
Verifying Driver Installation for Windows ME: Use these instructions to verify
successful driver installation on your system.
* Reinstalling Drivers for Windows ME
Use these instructions if you already have an USB 2.0 Controller installed; but
you do not have the USB 2.0 driver installed.
1. Right-click on the My Computer desktop icon, select Properties, then
click the Device Manager tab.
2. Select the View Devices by Type option; a yellow question mark will
appear by Other Devices. This represents the PCI Universal Serial Bus,
which is the EHCI controller.
3. Double-click on the PCI Universal Serial Bus, which is the EHCI controller,
and click on the General tab. Click on the Reinstall Driver button.
4. When the Update Device Driver Wizard appears, select Specify the location
of the driver (Advanced) and click Next.
5. Select Search for a better driver than the one your device is using now
(Recommended), check the Specify a location option; and click Browse.
6. When the Browse for Folder window appears, Select the folder:
{CD-ROM Drive}:\Drivers\USB2, which contains the driver information (.INF file)
for the device and click OK.
7. When the Update Device Driver Wizard appears there should be a location
displayed in the location text box, click on Next.
8. Verify that the location of the driver is correct. If you are satisfied with
the location specified, click Next; otherwise click Back and select a new
location.
9. When the driver is installed from the specified location, click Finish.
10. The driver has now been updated; a screen will appear with the updated
driver information. Click Close.
* Updating Drivers for Windows ME
Use these instructions if you have an USB 2.0 Controller; using an USB 2.0
driver and want to upgrade to the latest version.
1. Right-click on the My Computer desktop icon, select Properties, click the
Device Manager tab and then click on the "+" (plus) sign next to
Universal Serial Bus Controllers to expand the list.
2. Select the Asustek USB Enhanced Host Controller and click Properties.
3. Select the Driver Tab and click Update Driver. The driver information
shown shows the driver currently being used by the system.
4. When the Update Device Driver Wizard appears, select Specify the
location of the driver (Advanced) and click Next.
5. Select Search for a better driver than the one your device is using
now (Recommended), check the Specify a location option; and click
Browse.
6. When the Browse for Folder window appears, Select the folder:
{CD-ROM Drive}:\Drivers\USB2, which contains the driver information (.INF file)
for the device and click OK.
7. When the Update Device Driver Wizard appears there should be a location
displayed in the location text box, click on Next.
8. Verify that the location of the driver is correct. If you are satisfied with
the location specified, click Next; otherwise click Back and select a new
location.
9. When the driver is installed from the specified location, click Finish.
10. The driver has now been updated. A screen will appear with the updated
driver information. Click Close.
* Verifying Driver Installation for Windows ME
Use these instructions to verify successful driver installation on your system.
1. To verify that the driver is installed; right-click on the My Computer desktop
icon, select Properties, click the Device Manager tab, and then click on the
"+" (plus) sign next to Universal Serial Bus controllers to expand the list.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.