TRENDnet Support Publishing \PKTDRV\NCSA.TXT TRENDnet TE-16XP Ethernet Adapter Packet Driver Installation for NCSA Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Compatibility List Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ This installation assumes that the adapter is working properly. Please consult \SETUP\README.TXT for help with setup of the adapter. Getting Started will describe the installation instructions. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ NCSA TCP/IP An ISA compatible computer A TE-16XP Ethernet Adapter A knowledge of basic DOS commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ For a Motherboard compatibility list please consult your local Branch Office Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The First Step : Loading driver via two methods : METHOD 1: ÄÄÄÄÄÄÄÄ If the TE16XP.SYS program is used, the following statement must be included in your CONFIG.SYS file: DEVICE = TE16XP.SYS [/option] <packet_int_no> See \PKTDRV\README.TXT for addition parameters You can place this line anywhere in the CONFIG.SYS file. METHOD 2: ÄÄÄÄÄÄÄÄÄ If the TE16XP.COM program is used, follow these steps: Execute TE16XP.COM by typing: >TE16XP [/option] <packet_int_no> See \PKTDRV\README.TXT for addition parameters The Secondry Step: First, you need to install NCSA TCP/IP distributions into your machines. See also NCSA TCP/IP distributions \INSTALL for detail informations Please set correct values in CONFIG.TEL which is included in NCSA TCP/IP distributions as followings: in CONFIG.TEL : : hardware = packet ioaddr = <iobase> interrupt = <irq> : : These values must the same as driver's parameters. NCSA TCP/IP associated programs are ready to used See also NCSA TCP/IP distributions \INSTALL for detail informations Examples: > TE16XP.COM 0x62 > EDIT CONFIG.TEL : hardware = packet ioaddr = 300 interrupt = 5 : > TELNET <IP_ADDRESS>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.