1. Trend-Net_TE-16Xpress.zip Driver
2. 3SHARE.TXT File Contents

3SHARE.TXT Driver File Contents (Trend-Net_TE-16Xpress.zip)

TRENDnet Support Publishing       \PKTDRV\3SHARE.TXT

           TRENDnet TE-16XP Ethernet Adapter Packet Driver Installation
                   for 3Com 3+ Share

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Please consult \SETUP\README.TXT for help with setup of the adapter.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     An ISA compatible computer
     3COMs 3+Share Open Network Operating System
     A TE-16XP Ethernet Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable will this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any TE-16XP Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Follow the installation procedure for the 3Com EtherLink board.

     Copy the ETH.SYS file from the source directory of the driver disk
      into the boot disk. This program will replace the program of the
      same filename when the installation procedure in the first step is
      performed.

     Ensure that the CONFIG.SYS file in the boot disk or diskette
      contains the following two lines, in the given order:

        DEVICE = TE16XP.SYS </d> </w> <packet_int_no>
        DEVICE = ETH.SYS

        <packet_int_no> is the software interrupt vector number used by the
                        packet driver program. This can be from 96 to 128.

        /d              Delay Initial - The driver program will not initialize
                        the network interface card until the packet driver
                        program is accessed by its upper layer program.

        /w              The -w parameter is for use only in the Windows
                        environment.

        See \PKTDRV\README.TXT for addition parameters

     You may now reboot and to start 3COM workstation.



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.