TRENDnet Support Publishing \NBIOS\README.TXT TRENDnet TE-16XP Ethernet Adapter Installation for NBIOS Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Compatibility List Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ This installation assumes that the adapter is working properly. Please consult \SETUP\README.TXT for help with setup of the adapter. Getting Started will describe the installation instructions. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ An ISA compatible computer Netbios Compatible Network Operating System A TE-16XP Ethernet Adapter A knowledge of basic DOS commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Any TE-16XP Ethernet Adapter For a Motherboard compatibility list please consult your local D-Link Branch Office Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The NetBIOS Emulator is a standardized network interface program that allows this adapter to run NetBIOS-based network operating systems like the IBM PC LAN Program and others. No software modification or additional installation is necessary. All operations, as well as installation procedures for the network operating system, remain the same. Install the Network Operating System Remove any references to a network adapter driver and netbios In the appropriate batch file add the following before loading the network operating system. Load the IPX SHELL program, TE16XP.COM. Load the NetBIOS Emulator program, NBIOS.EXE. The following switches can adjust Netbios to meet the configuration. >NBIOS [/Sm] [/Ck] The parameters after NBIOS are optional. Their functions are: /Sm specifies the maximum number of sessions allowed in your computer where m ranges from 1 up to 254.If this parameter is not specified, the default values of 32 will be used. /Ck specifies the maximum number of NetBIOS commands that can be used in your computer; where k ranges from 1 up to 255. If this parameter is not specified, the default value of 32 will be used. Your computer is now ready to run a NetBIOS-based network operating system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.