TRENDnet Support Publishing \SCOUNIX\README.TXT
TRENDnet TE-16XP Ethernet Adapter Installation
for SCO Unix 3.2.4x
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the adapter is working properly.
Please consult \SETUP\README.TXT for help with setup of the adapter.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
An ISA compatible computer
SCO Unix 3.2.4x with TCP/IP v1.2x
A TE-16XP Ethernet Adapter
A knowledge of basic Unix commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic Unix commands
A knowledge of editing text files
A knowledge of Unix basic file structure
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Compatibility List
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Any TE-16XP Ethernet Adapter
For a Motherboard compatibility list please consult your local
Branch Office
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Single Card Installation (see below for multiple)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Login to the network as root. (On maintenance mode)
Insert the driver diskette in Drive A or Drive B and use the
doscp command to copy the SCOUNIX Driver into the UNIX directory.
example:
# cd /
# doscp a:/scounix/setup setup
(or # doscp b:/scounix/setup setup)
# chmod +x /setup
# ./setup a:/scounix
(or # ./setup b:/scounix)
Add a chain by executing the netconfig command
example:
#netconfig
A menu similar to the following appears on the screen:
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
q) Quit
Select option 1 "Add a chain".
The following prompt appears:
Select top level of chain to Add or q to quit:
Select sco_tcp for SCO TCP/IP for UNIX.
The following message appears:
Select next level of chain to Add or q to quit:
Select d22e0. This value varies according to your card number.
The following prompt appears:
Add chain sco_tcp->d22e0 (y/n):
Type "y" for yes.
The following message appears:
Enter number of media mode selection (0 1 2 3 4) [3]
or 'q' to quit:
ÚNOTE:ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ 0. Twisted pair connection. ³
³ 1. BNC connection. ³
³ 2. AUI connection. ³
³ 3. Automatic detection between TP BNC and AUI. ³
³ 4. Use EEPROM setting. ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Type in the media mode number.
The following message appears:
Enter the internet address of this interface:
Specify the internet address (IP address) of the interface.
The following message appears:
Enter the netmask for this interface:
Specify the subnet mask for the interface. Please consult the systems
administrator if it is unknown. Default mask is 255.255.255.0.
The following message appears:
Does the interface use a broadcast address of all 1's (y/n):
Answer this question accordingly. Default is "y".
The following message appears:
Enter the broadcast address for this interface:
Type in the broadcast address for the interface.
The following message appears:
Are these values correct ? (y/n)
If all values are correct, type "y". Otherwise, answer "n" and
repeat the process.
The following message appears:
XX Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q]
Type "q".
The main menu reappears on the screen:
1) Add a chain
2) Remove a chain
3) Reconfigure a element in a chain
q) Quit Select option:
Select "q".
The following message appears:
Do you want to relink to kernel now ?
Type "y" for yes.
The following message appears:
Do you want this kernel to boot by default (y/n)
Type "y" for yes.
The following message appears:
Do you want the kernel environment rebuilt (y/n)
Type "y" for yes.
Reboot UNIX by typing the following:
#shutdown -y -g0
Notes on Multi-Card installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
This installation procedure applies to SCO UNIX LLI drivers
with TCP/IP v.1.2x.
Follow the same procedure above to add more cards to the computer.
Please consult the manuals for further information.
Up to four TE-16XP Ethernet adapter can be installed in to a
workstation. The following are sample combinations:
TE-16XP *4
any combination of 4
Support gateway function (that is; routing function).
Statistical information can be retrieved via the #netstat -i command.
Executing this command displays a screen similar to the following:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Collis
d10e0 1500 192.9.200 unix2 423 0 423 0 0
d22e0 1500 15 unix3 423 0 423 0 0
d20e0 1500 168.8 unix 556 0 890 0 0
lo0 2048 127.0 localhost 180 0 180 0 0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.