1. Trend-Net_TE-16Xpress.zip Driver
2. NT40.TXT File Contents

NT40.TXT Driver File Contents (Trend-Net_TE-16Xpress.zip)

TRENDnet Support Publishing       \NT\NT40.TXT

        TRENDnet TE-16XP Ethernet Adapter Installation
                   for Windows NT 4.0

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Please consult \SETUP\README.TXT for help with setup of the adapter.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     An ISA compatible computer
     Microsoft's Windows NT 4.0
     A TE-16XP Ethernet Adapter
     A knowledge of basic NT commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic NT commands
     A knowledge of editing text files
     A knowledge of NT basic file structure
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable will this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any TE-16XP Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      Branch Office


 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Start your Windows NT 4.0 PC normally and inserting the adapter
      into your computer.

     Open "My Computer" -> "Control Panel" -> "Networks" icons.

     Select "adapter" -> "add" -> "Have disk" items.
      Type the following (assume the driver is located at C:\NT40)

            C:\NT40


     Windows NT 4.0 will copy the driver files from the release driver disk.
      It also will pop up the configuration window, you can assign the
      "Connection Type" and "Network Address" here.

     After finishing file copy, Windows NT 4.0 will ask you to reboot the PC.
      Select YES.

     Restart the computer.


    Driver keywords:
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

     Open "My Computer" -> "Control Pannel" -> "Network" ->

      Network Address      You can set the Ethernet address for your adapter.
                           It is not recommended to use this keyword. Please
                           use default value if possible.
                           As you know two or more adapter in the same network
                           with same Ethernet address will cause a little
                           poblem.

                           When using this keyword you need to input exactly
                           6 bytes of Ethernet address using one of the
                           following format:

                             xx-xx-xx-xx-xx-xx
                           OR
                             xxxxxxxxxxxx

                           Default: read address from adapter ROM.


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.