TRENDnet Support Publishing TURBODRV.TXT TRENDnet TE-16XP Ethernet Adapter Installation for the Turbo Drivers Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Compatibility List Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ The Turbo driver is a re-tuned set of drivers that allows throughput up 80% higher than normal. This driver takes advantage of a special feature in your cards and the Netware 3.11 network operating system. This implementation does require all workstations and servers to use vendor adapters that have "Turbo" drivers. Furthermore only Netware 3.11 or 3.12 file servers that have their workstations using NETX for the shell should be used. Do not use these drivers with VLMs or Netware 4.x because of instabilities will develop. We recommends that a site test this driver before production LAN use was implemented. This installation assumes that the adapter is working properly. Please consult \SETUP\README.TXT for help with setup of the adapter. Getting Started will describe the installation instructions. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ An ISA compatible computer An ODI compatible network operating system A TE-16XP Ethernet Adapter A knowledge of basic DOS commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Any TE-16XP Ethernet Adapter For a Motherboard compatibility list please consult your local Branch Office Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Turbo Driver implements the same format used by ODI drivers, thus it is also considered as an ODI driver. Manual Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Copy the TE16XP.COM from this diskette into the Netware client directory containing Novell's LSL.COM, IPXODI.COM and NETx.COM files. Follow Novell's instructions on using ODI programs. You can substitute the TE16XP.COM whenever a reference is made to the Hardware Specific Module. A typical ODI workstation startup batch file includes: >LSL ; Link Support Layer Module provided by Novell >TE16XP.COM ; Hardware Specific Turbo Module >IPXODI ; IPX Protocol Stack Module provided by Novell >NETX ; DOS Shell Support Module provided by Novell >LOGIN NOTE: You also need to load TE16XP.LAN on the NetWare server to effectively use the Turbo Driver!Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.