TRENDnet Support Publishing NW311.TXT
TRENDnet TE-16XP Ethernet Adapter Installation
for the NetWare Server 3.11 Driver
Contents
ÍÍÍÍÍÍÍÍ
Introduction
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the adapter is working properly.
Please consult README.TXT for help with setup of the adapter.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
An ISA compatible computer
An ODI compatible network operating system
A TE-16XP Ethernet Adapter
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Compatibility List
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Any TE-16XP Ethernet Adapter
For a Motherboard compatibility list please consult your local
Branch Office
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
******************************************************************
* *
* Notes: Please make sure that you use the MONITOR.NLM program *
* which is distributed on the release driver diskette. *
* The original MONITOR.NLM shipped with NetWare 3.11 has *
* a bug and will crash the system. *
******************************************************************
Modifying an existing NetWare 3.11 Server
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Make a sub-directory NLMS.OLD under <SRVPATH> directory which
include SERVER.EXE.
Ex. <SRVPATH> = NW311.
Save NBI31X.NLM, MSM31X.NLM and ETHERNET.NLM to NLMS.OLD
sub-directory.
Copy all provided NLM and LAN files into your dos directory
which include SERVER.EXE.
>COPY <PATH>\*.* C:\<SRVPATH>
Ex. >COPY A:\NETWARE\SERVER\NW312\*.* C:\NW311
<PATH> here is the directory where support NLMs and
TE16XP.LAN reside.
Start the NetWare Server.
> CD \NW311
> SERVER
From the Novell Server side, execute "LOAD INSTALL". Type:
:LOAD INSTALL
Select <System Option>
Select <Edit Autoexec.NCF file>
Add below item into the server's AUTOEXEC.NCF file.
LOAD C:\NW311\LSLENH.NLM
LOAD C:\NW311\PATCHMAN.NLM
LOAD C:\NW311\MSM31X.NLM
LOAD C:\NW311\ETHERTSM.NLM
LOAD C:\NW311\TE16XP PORT=300 INT=B FRAME=Ethernet_802.3
NAME=TE16XP_1_E83
BIND IPX TE16XP_1_E83 NET=xxxx
LOAD C:\NW311\TE16XP PORT=300 INT=B FRAME=Ethernet_802.2
NAME=TE16XP_1_E82
BIND IPX TE16XP_1_E82 NET=xxxx
LOAD C:\NW311\TE16XP PORT=300 INT=B FRAME=Ethernet_II
NAME=TE16XP_1_EII
BIND IPX TE16XP_1_EII NET=xxxx
LOAD C:\NW311\TE16XP PORT=300 INT=B FRAME=Ethernet_SNAP
NAME=TE16XP_1_ESP
BIND IPX TE16XP_1_E83NET=xxxx
LOAD C:\NW311\MONITOR.NLM
Restart the server again.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.