TRENDnet Support Publishing DOSODI.TXT TRENDnet TE-16XP Ethernet Adapter Installation for the Netware DOS ODI Driver Contents ÍÍÍÍÍÍÍÍ Introduction Requirements Minimum Skill Level Compatibility List Getting Started First installation from CD ROM Manual Installation How to creat Diskettes for installation Installation from Diskettes Introduction ÍÍÍÍÍÍÍÍÍÍÍÍ The ODI driver program allows you to run multiple protocol stacks and install up to two network adapters in a workstation. This ODI driver supports the Port, Node Address, Protocol and Frame options for creating your own NET.CFG file. For more information on these keywords, please refer to Novell's "NetWare ODI shell for DOS - NET.CFG options". This installation assumes that the adapter is working properly. Please consult README.TXT for help with setup of the adapter. Getting Started will describe the installation instructions. Requirements ÍÍÍÍÍÍÍÍÍÍÍÍ An ISA compatible computer An ODI compatible network operating system A TE-16XP Ethernet Adapter A knowledge of basic DOS commands and editing text files Minimum Skill Level ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ A knowledge of basic DOS commands A knowledge of editing text files A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Any TE-16XP Ethernet Adapter For a Motherboard compatibility list please consult your local Branch Office Getting Started ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ The NOVELL installation diskettes or CD ROM are needed to complete this install. First installation from CD ROM ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Please make sure CD ROM player work fine under DOS environment. Run INSTALL.BAT and press any key to accept the agreement. Ex. >INSTALL Select "Client Installation" in Select the type of installation desired window. Select "NetWare DOS/WINDOWS Client (VLM)" in Select Client to be installed window. Specify your target directory, installation default path is C:\NWCLIENT. (suggestion: DONT CHANGE) Allow system to modified your AUTOEXEC.BAT and CONFIG.SYS. Specify YES to install support for MS Windows, if you accept. Move the highlight bar to Select the driver for your network board and press <Enter>. Put the released diskette into floppy disk and go to bottom Select "OTHER DRIVERS" under Network Board. Specify the full path of ODI for DOS driver, A:\<PATH>. Ex. A:\NETWARE\CLIENT\ODI.DOS Select "TRENDnet TE-16XP" for Ethernet Adapter. Specify "Base I/O Port", and "Media Frame Type(s)", then press "F10" to save/continue. Move to "Highlight here and press <Enter> to install". Press <Enter> after you configure correctly, then installation will copy necessary files to your hard disk. Restart your system and connect to NetWare server. Manual Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Assume you have installed NetWare Client for DOS system. Copy <PATH>\TE16XP.COM file from released diskette into the Netware client directory containing LSL.COM, IPXODI.COM, NETx.COM or VLM.COM, VLM files. Ex. >COPY A:\NETWARE\CLIENT\ODI.DOS\TE16XP.COM C:\NWCLIENT A typical Client for DOS startup batch file includes: Content of STARTNET.BAT ----------------------- SET NWLANGUAGE=English C:\NWCLIENT\LSL.COM C:\NWCLIENT\TE16XP.COM C:\NWCLIENT\IPXODI.COM C:\NWCLIENT\VLM.EXE F: ; According FIRST NETWORK DRIVE of NET.CFG LOGIN XXXX ; Login to server, XXXX is user name ; Notes: C:\NWCLIENT\VLM.EXE /PS=SSSS ; SSSS is server name Content of NET.CFG ------------------ Link Driver TE16XP FRAME ETHERNET_802.2 FRAME ETHERNET_802.3 FRAME ETHERNET_II FRAME ETHERNET_SNAP NetWare DOS Requester FIRST NETWORK DRIVE = F NETWARE PROTOCOL = NDS BIND How to creat Diskettes for installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Please make sure CD ROM player work fine under DOS environment. Run INSTALL.BAT and press any key to accept the agreement. Ex. >INSTALL Select "Diskette Creation" in Select the type of installation desired window. Select "NetWare DOS/WINDOWS Client (VLM)" in Select the Diskette set to be created window. Following screen's instruction. Installation from Diskettes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Run INSTALL program and press any key to accept the agreement. Ex. >INSTALL Please reference above "First installation from CD ROM".Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.