TRENDnet Support Publishing CLIENT32.TXT
TRENDnet TE-16XP Ethernet Adapter Installation
for Client 32
Contents
ÍÍÍÍÍÍÍÍ
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Client 32 for Windows 95
Client 32 for DOSWIN
Requirements
ÍÍÍÍÍÍÍÍÍÍÍÍ
An ISA compatible computer
Microsoft's Windows 95
Netware Client 32 for Windows 95 (OR)
Netware Client 32 for DOSWIN
A TE-16XP Ethernet Adapter
A knowledge of basic Win 95 commands and editing text files
Minimum Skill Level
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
A knowledge of basic Win 95 commands
A knowledge of editing text files
A knowledge of Win 95 basic file structure
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Compatibility List
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
Any TE-16XP Ethernet Adapter
For a Motherboard compatibility list please consult your local
Branch Office
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
Notes: Please specify I/O adress and IRQ, when your adapter in
non-PnP mode.
Client 32 for Windows 95
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The Windows 95 installation disks or CD are need to complete this
install.
The NOVELL Client 32 installation disks or CD are needed to complete
this install.
First Time Installation (1)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install adapter in your system slot.
Run the Client 32 for Windows 95 installation program,
using SETUP.EXE.
Ex. Open File Explorer and click SETUP.EXE under Client 32
for Windows 95 source directory.
Check the box of "Upgrade NDIS drivers to ODI automatically,
if avaiable" and press "Start>".
Following Client 32 for Windows 95 installation instruction.
Click "Yes" under "Recommended Netware Client 32 Properties"
window.
Specify Netware Prefered server name.
Reboot the system and connect to Netware server.
First Time Installation (2)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install adapter in your system slot.
Start Windows 95 system then will found the adapter and load
NDIS 3 driver automaticlly.
Click on "My Computer" -> "Control Panel" -> "Network" ->
"Remove" button to delete the old driver.
Don't reboot your system.
Run the Client 32 for Windows 95 installation program,
using SETUP.EXE.
Ex. Open File Explorer and click SETUP.EXE under Client 32
for Windows 95 source directory.
Check the box of "Upgrade NDIS drivers to ODI automatically,
if avaiable" and press "Start>".
Following Client 32 for Windows 95 installation instruction.
Click "Yes" under "Recommended Netware Client 32 Properties"
window.
Specify Netware Prefered server name.
Reboot Windows 95 system then will found the adapter and load
Client 32 driver automaticlly.
Click on "My Computer" -> "Control Panel" -> "Network" ->
"Remove" button to delete the NE2000 driver.
Reboot Windows 95 system again and connect to Netware server.
The other Time Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
The Client 32 for Windows 95 have been install successfully.
Click on "My Computer" -> "Control Panel" -> "Network" ->
"Remove" button to delete the old driver.
Restart Windows 95 system then the system and will found the
adapter and load Novell Client 32 driver automatically.
Restart Windows 95 system again.
Install from released Diskette
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Start both Windows 95 and Client 32 for Windows 95 system.
Click on "My Computer" -> "Control Panel" -> "Network" ->
"Remove" button to delete the old driver.
From the "Network" window, click on "Add".
The program prompts for the component type.
Double-click on "Adapter".
Select "Have Disk...".
Specify the full path of the driver, ie. A:\<PATH>.
The program displays a network adapter list.
Ex. A:\NETWARE\CLIENT32\WIN95
Select "TRENDnet TE-16XP Ethernet Adapter".
Select "OK" when finished
After specifying any settings, click OK on the properties page
to close the network windows.
The system will require some of the Windows 95 disks and Client
32 for Windows 95 to install network support.
After copying the necessary files, select "Yes" to restart your
system.
Non-PnP Adapter
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Start both Windows 95 and Client 32 for Windows 95 system.
Click on "My Computer" -> "Control Panel" -> "Network" ->
"Remove" button to delete the old driver.
From the "Network" window, click on "Add".
The program prompts for the component type.
Double-click on "Adapter".
Select "TRENDnet" in Manufactures windows.
Select "TRENDnet TE-16XP Ethernet Adapter" in Network Adapters
windows.
Select adapter "IRQ" and "port".
Reboot Windows 95 system and connect to Netware server.
Client 32 for DOSWIN
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Windows 3.x
ÄÄÄÄÄÄÄÄÄÄÄ
Start Windows 3.x system
Run the Client 32 for DOSWIN installation program, using
SETUP.EXE
Ex: >CD \<PATH> ; <PATH> is Client 32 for DOSWIN
>SETUP.EXE
or
Double click SETUP.EXE in Files Manager windows
Press ENTER to accept the argeement.
Specify your target directory.
Ex. C:\NOVELL\CLIENT32 ; If choice C driver.
Select "TRENDnet TE-16XP Ethernet LAN Driver".
Restart your workstation, click "Netware Login" to login
Netware server from NetWare Tools.
DOS
ÄÄÄ
Run the Client 32 for DOSWIN installation program, using
INSTALL.EXE.
Ex: >CD \<PATH> ; <PATH> is Client 32 for DOSWIN
>INSTALL.EXE
Press ENTER or YES to accept the argeement.
Select "Netware Client 32 for DOS".
Use default value in Customize Support for Windows,
if you Select "Netware Client 32 for Windows" too.
Press "F10" to continue.
Select "32-bit LAN drivers" from LAN Driver Type window.
Select "USER SPECIFIED 32 BIT DRIVER".
Specify the full path of the driver, ie. A:\<PATH>.
Ex. A:\NETWARE\CLIENT32\DOSWIN
Select "TRENDnet TE-16XP Ethernet LAN Driver" from 32-Bit
Network Board Drivers window.
Specify "Frame Type","Noed Address","Port" setting, then press
"F10" to save.
Ex. Default value as below
Frame Type is Ethernet_802.2
Port is 300
Press "F10" to continue in Installation Configuration Summary
window, if you accept.
AUTOEXEC.BAT and CONFIG.SYS will be update after installation.
Restart your workstation and load the NetWare networking
software, it will connect to Netware server.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.