TRENDnet Support Publishing \NDIS\PATHWORK.TXT
TRENDnet TE-16XP Ethernet Adapter Installation
for DECnet PATHWORK v4.0
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the adapter is working properly.
Please consult \SETUP\README.TXT for help with setup of the adapter.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
An ISA compatible computer
DECnet PATHWORK v4.0
A TE-16XP Ethernet Adapter
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Compatibility List
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Any TE-16XP Ethernet Adapter
For a Motherboard compatibility list please consult your local
Branch Office
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
DECnet PathWork provides a NETSET.EXE program for installing NDIS
drivers. For information on the usage of this program, please refer
to the DECnet installation manual.
Install DECnet PathWork selecting 3Com's Etherlink II card.
Modify your CONFIG.SYS file to include the following lines:
device = c:\decnet\ELNKII.SYS
to
device = c:\decnet\TE16XP.DOS
Modify the following lines in your PROTOCOL.INI file:
[ELNKMACII]
drivername = ELNKII$
ioaddress = 0x300
interrupt = 11
xmitbufs = 2
[IPX4MAC]
:
bindings = ELNKMACII
:
[DATALINK]
:
bindings = ELNKMACII
:
to
[TE16XP]
drivername = TE16XP$
[IPX4MAC]
:
bindings = TE16XP
:
[DATALINK]
:
bindings = TE16XP
:
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.