TRENDnet Support Publishing \NDIS\MSCLIENT.TXT
TRENDnet TE-16XP Ethernet Adapter Installation
for Microsoft Network Client 3.0 for MS-DOS
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Requirements
Minimum Skill Level
Compatibility List
Getting Started
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the adapter is working properly.
Please consult \SETUP\README.TXT for help with setup of the adapter.
Getting Started will describe the installation instructions.
Requirements
ÄÄÄÄÄÄÄÄÄÄÄÄ
An ISA compatible computer
Microsoft Network Client
A TE-16XP Ethernet Adapter
A knowledge of basic DOS commands and editing text files
Minimum Skill Level
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
A knowledge of basic DOS commands
A knowledge of editing text files
A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
A knowledge of the network driver configuration being used
Please see Support Options if you are not comfortable will this
skill level
Compatibility List
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Any TE-16XP Ethernet Adapter
For a Motherboard compatibility list please consult your local
Branch Office
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
[Method 1]:
Execute SETUP.EXE from Microsoft Network Client for DOS release
diskette.
Specify the <target path> which Microsoft Network Client for DOS
files will been copy.
Select "Network adapter not shown on list below ...".
Please specify the location (path, C:\NDISDOS) of the OEM driver
you want to use, press <Enter>.
Select "TRENDnet TE-16XP Ethernet adapter".
Select "Change Network Configuration", "Add Protocol" as you want.
Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the default
options. Press <Enter> until you reach the display prompting you
to reboot your system.
[Method 2]:
Please Change to the Microsoft Network Client subdirectory,
and run SETUP.EXE. (default directory is C:\NET)
The screen will display some information. Press <Enter> .
Responds to the screen prompts, selecting "Change Network
Configuration",then press <Enter>.
Move the highlight to "Add Adapter", press <Enter>.
Select "Network adapter not shown on list below ...".
Please specify the location (path, C:\NDISDOS) of the OEM driver
you want to use, press <Enter>.
Select "Add Protocol" as you want.
Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the default
options. Press <Enter> until you reach the display prompting you
to reboot your system.
Sample Configuration Files:
---------------------------
PROTOCOL.INI (install will creates this file)
[network.setup]
version=0x3110
netcard=TE16XP,1,TE16XP,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
lana0=TE16XP,1,ms$netbeui
lana1=TE16XP,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=TE16XP
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=TE16XP
LANABASE=0
[TE16XP]
DriverName=TE16XP$
MEDIA=AUTODETECT
EARLYTX=OFF
SEARCH_ALL_CARD=OFF
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.