TRENDnet Support Publishing \NDIS\LANSRV.TXT TRENDnet TE-16XP Ethernet Adapter Installation for IBM Lan Server 4.x/3.x/2.x and Comm. Manager 1.x Contents ÄÄÄÄÄÄÄÄ Introduction Requirements Minimum Skill Level Compatibility List Getting Started Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ This installation assumes that the adapter is working properly. Please consult \SETUP\README.TXT for help with setup of the adapter. Getting Started will describe the installation instructions. Requirements ÄÄÄÄÄÄÄÄÄÄÄÄ An ISA compatible computer IBM Lan Server 4.x/3.x/2.x and Comm. Manager 1.x A TE-16XP Ethernet Adapter A knowledge of basic OS/2 commands and editing text files Minimum Skill Level ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A knowledge of basic OS/2 commands A knowledge of editing text files A knowledge of OS/2 basic file structure (CONFIG.SYS and AUTOEXEC.BAT) A knowledge of the network driver configuration being used Please see Support Options if you are not comfortable will this skill level Compatibility List ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Any TE-16XP Ethernet Adapter For a Motherboard compatibility list please consult your local Branch Office Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following is how to install Lan Server and Comm. Manager. Due to Lan Server 4.x popularity it's documentation appears first. Installing the NDIS driver for IBM LAN SERVER 4.0 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ In the OS/2 Desktop group, double-click on the MPTS icon. Click on the <Configure> button. Select the "LAN adapters and protocols" option. Click on the <Configure> button. Select the "Other adapters ..." option. Insert the driver diskette in Drive A or B and type the driver path: A:\<PATH>\ Where PATH is the driver directory. or C:\<PATH>\ (if install program specify) Click on the <OK> button. Select "TRENDnet TE-16XP Ethernet Adapter", and then click on the Add button. Select "IBM OS/2 NETBIOS", and then click on the Add button. Select "IBM IEEE 802.2", and then click on the Add button. Click OK. Click Close. Click Exit. Reboot your system. Installing the NDIS driver for IBM LAN SERVER 3.0 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Install IBM OS/2 into your system, if not yet installed. Insert the NTS/2 Adapter & Protocol Support Disk in Drive A. Execute the LAPs program. Select "Install", and then specify the target drive. Select "Install" again and insert your driver diskette in Drive A. A:\<PATH>\ Where PATH is the driver directory. or C:\<PATH>\ (if install program specify) Select "Configure". Select "TRENDnet TE-16XP Ethernet Adapter", and then click on the Add button. Select "IBM OS/2 NETBIOS", and then click on the Add button. Select "IEEE 802.2", and then click on the Add button. Click OK. Click Exit. Click Continue. Reboot your system. Your CONFIG.SYS and PROTOCOL.INI files should reflect your card setup: \CONFIG.SYS =========== : Device=d:\IBMCOM\MACS\TE16XP.OS2 : \IBMCOM\PROTOCOL.INI ==================== : [TE16XPI_NIF] Drivername = TE16XP$ Install the LAN Server or Requester program. For information, please refer to your IBM LAN Server "Planning and Installation" manual. Installing the NDIS driver for IBM LAN SERVER 2.0 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Assuming that OS/2 2.0 is correctly installed and working properly, install the LAN SERVER. At this point, no network adapters must be installed in the computer. Install LAN SERVER according to the IBM installation procedure. When prompted for the adapter, select any of the adapters LAN SERVER supports. For example, "Western Digital EtherCard PLUS ...". Then, continue with the LAN SERVER installation. After successfully installing LAN SERVER, shut down OS/2 for system configuration. Do not install any network adapters yet. The OS/2 system will boot up and bring up the LAN SERVER services. The system will then display error messages since the network adapter you selected is not installed. Ignore these messages and continue with the OS/2 booting procedure. Insert the driver diskette in Drive A and copy the following files: COPY TE16XP.OS2 to C:\IBMCOM\MACS COPY TE16XPI.NIF to C:\IBMCOM\MACS\TE16XPI.NIF A:\<PATH>\ Where PATH is the driver directory. or C:\<PATH>\ (if install program specify) In the OS/2 Desktop group, run the OS/2 system editor. You need to modify the following files: C:\CONFIG.SYS C:\IBMCOM\PROTOCOL.INI CONFIG.SYS Modifications: DEVICE=C:\IBMCOM\MACS\MACWD.OS2 to DEVICE=C:\IBMCOM\MACS\TE16XP.OS2 PROTOCOL.INI Modifications: - Under the [IBMLXCFG] section, add the following line: TE16XPI_nif = TE16XPi.nif - Under the [NETBEUI_nif] section, change the following line: Bindings = MACWDMC_nif to Bindings = TE16XPI_nif - Under the MAC SECTION definitions, add the following section: [TE16XPI_nif] DriverName = TE16XP$ After modifying the two files above, shut down OS/2, and turn the computer off. Install the TE-16XP Ethernet adapter. Turn on the system to start OS/2. After starting OS/2, LAN SERVER services can now successfully start without causing any errors. Installing the NDIS driver for IBM Communication Manager 1.0 ============================================================ Install IBM Communication Manager Copy the TE16XP.OS2 and TE16XPI.NIF files in the driver diskette to the C:\IBMCOM\MACS directory Select the TE-16XP Ethernet adapter Choose the appropriate protocols Check that the CONFIG.SYS file includes the following line: DEVICE = C:\IBMCOM\MACS\TE16XP.OS2 Shut down your OS/2 system, and then reboot your PCDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.