1. Trend-Net_TE-16Xpress.zip Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (Trend-Net_TE-16Xpress.zip)

TRENDnet Support Publishing       \NDIS\BANYAN.TXT

        TRENDnet TE-16XP Ethernet Adapter Installation
                   for Banyan Vines

 Contents
 ÄÄÄÄÄÄÄÄ
     Introduction
     Requirements
     Minimum Skill Level
     Compatibility List
     Getting Started

 Introduction
 ÄÄÄÄÄÄÄÄÄÄÄÄ
    This installation assumes that the adapter is working properly.
    Please consult \SETUP\README.TXT for help with setup of the adapter.
    Getting Started will describe the installation instructions.

 Requirements
 ÄÄÄÄÄÄÄÄÄÄÄÄ
     An ISA compatible computer
     Banyan VINES v4.00(2)
     A TE-16XP Ethernet Adapter
     A knowledge of basic DOS commands and editing text files

 Minimum Skill Level
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     A knowledge of basic DOS commands
     A knowledge of editing text files
     A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT)
     A knowledge of the network driver configuration being used
     Please see Support Options if you are not comfortable will this
      skill level

 Compatibility List
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     Any TE-16XP Ethernet Adapter
     For a Motherboard compatibility list please consult your local
      Branch Office

 Getting Started
 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
    There are two methods of copying files from the Banyan VINES
    workstation to the bootable diskette or subdirectory on the hard
    disk.

    Method 1
    ÄÄÄÄÄÄÄÄ
     Execute the 'INSTALL' command included in the diskette labeled
      "VINES MASTER DISK".

     Follow the given instructions for copying files.

    Method 2
    ÄÄÄÄÄÄÄÄ
     Execute the 'BAN' command.
     Login to VINES system.
     Execute the 'PCCOPY' command.

     Select the 'NDIS Ethernet' option and follow the instructions for
      copying files.

     Prepared bootable diskette in Drive B. Then, copy the appropriate NDIS
      driver file TE16XP.DOS to Drive B.

     Create a CONFIG.SYS file with the following statements:

        DEVICE=PROTMAN.DOS /I:A:\
        DEVICE=TE16XP.DOS

      NOTE:  A:\ is the path where Banyan VINES workstation files reside.

     Create a TE16XP.NIF file containing the following statements:

        Model = TRENDnet TE-16XP Ethernet Card
        Path = A:\
        DeviceDriver = TE16XP.DOS
        DeviceName = TE16XP$
        Type = NDIS

      NOTE:  A:\ is the path where Banyan VINES workstation files reside.

     Create a PROTOCOL.INI file with the following lines:

        [PROTOCOL MANAGER]
        drivername = PROTMAN$

        [VINES_XIF]
        drivername = NDISBAN$
        bindings = "TE16XP"

        [TE16XP]
        drivername = TE16XP$

     Execute the 'PCCONFIG' command.

      A "CONFIGURING A PC FOR THE NETWORK" message appears on the
      screen. The program then provides some options you can select.

     Select "1 - Network Card Settings".

      Another screen appears for selecting some options.

     Select "NDIS Ethernet".

     Select the appropriate configuration of the adapter.

     After configuring the adapter, you return to the main screen.

      Select "2 - Login Environment Settings".

     From the next screen, select "NDIS Ethernet".

      The 'PCCONFIG.DB' file will then be created.

     Reboot your computer.

     Login to VINES by executing the 'BAN' command.