MSP5800-U PCI Modem ==================== Section A: Important notice Section B: Installation of PCI modem drivers on Windows 95 OSR1 platform Section C: Installation of PCI modem drivers on Windows 95 OSR2 platform Section D: Installation of PCI modem drivers on Windows 98 platform Section E: Installation of PCI modem drivers on Windows NT platform Section F: How to change the default Com Port to other Com Port Section G: Installation of Trio DataFax Voice and other applications Section H: How to install Microsoft Fax in Windows 98 Section I: How to configure modem to work with DOS Box games or application Section J: Technical Support ------------------------------------------------------------------------------------------------- Section A: Important notice ================ 1. The PCI modem can be set up on Windows 95 OSR1, Windows 95 OSR2, Windows 98 or Windows NT but no support on WIN3.x platform. 2. For information how to use the AT command, please refer to file Atcomset.doc in the root directory of the installation CD. ------------------------------------------------------------------------------------------------- Section B: Installation of PCI modem drivers on Windows 95 OSR1 platform ============================================================== 1. Win95 will automatically detect the PCI PnP Modem and displays the 'New Hardware Found' dialog box. 2. Insert the installation CD provided into the CD-ROM drive. 3. Select the 'Driver from disk provided by Hardware manufacturer' option and click 'OK'. 4. Type D:\Win9x\ in the combo box and click 'OK'. (Assuming the drive letter of your CDROM is D) You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on 'Modem'. Choose the modem device and click on 'Properties'. You can change the settings to resolve the device conflict. For further details, please refer to Trouble-shooting section in Windows 95. ------------------------------------------------------------------------------------------------- Section C: Installation of PCI modem drivers on Windows 95 OSR2 platform ============================================================== 1. Win95 will automatically detect the PCI PnP Modem after which the system will prompt the 'Update Device Driver Wizard' dialog box. 2. Insert the installation CD provided into the CD-ROM drive. 3. Click 'Next' to let system search for an updated driver. 4. Click 'Finish' to use the found driver. 5. Click 'OK' when prompted to insert the installation disk. 6. Change path to D:\ and click 'OK'. (Assuming the drive letter of your CDROM is D) 7. System will then automatically load all the necessary drivers and files needed. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on 'Modem'. Choose the modem device and click on 'Properties'. You can change the settings to resolve the device conflict. For further details, please refer to Trouble-shooting section in Windows 95. Uninstallation ============== Go to 'Control Panel'. Double-click on 'HSP Modem'. Click on 'Uninstall' button and then 'OK' to uninstall the MSP5800-U Modem. ------------------------------------------------------------------------------------------------- Section D: Installation of PCI modem drivers on Windows 98 platform ========================================================= Installation of modem drivers in Win98 is similar to Win95. 1. Windows 98 will automatically detect the PCI modem. Click Next to continue. 2. Insert the installation CD provided into the CD-ROM Drive. 3. Select 'Search for the best drivers for your device. (Recommended)' and click 'Next' to continue. 4. Enable 'CD-Rom drive' selection and click 'Next' to continue. 5. Modem Driver will be found on the installation CD. Click 'Next' to continue. 6. Click 'Finish' to complete modem installation. 7. System will then automatically load all the necessary drivers and files needed. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on 'Modem'. Choose the modem device and click on 'Properties'. You can change the settings to resolve the device conflict. For further details, please refer to Trouble-shooting section in Windows 98. Uninstallation ============== Go to 'Control Panel'. Double-click on 'HSP Modem'. Click on 'Uninstall' button and then 'OK' to uninstall the MSP5800-U Modem. ------------------------------------------------------------------------------------------------- Section E: Installation of PCI modem drivers on Windows NT platform ========================================================= 1. Run the setup.exe located at D:\Winnt\ (Assuming the drive letter of your CDROM is D) 2. Modem Setup Wizard dialog box will pop out. Click 'Next'. 3. Click 'Next' again in the next dialog box. 4. 'Install from Disk' dialog box will pop out. Type D:\Winnt\ and click 'OK'. 5. Next click 'OK' and finally click 'Finish' to reboot the system. Note: If Windows NT does not copy files during the installation, please goto 'Windows NT/Inf' directory and delete unused oem*.inf and oem*.pnf files, then try again. Uninstallation ============== 1. Go to 'Control Panel' and click on 'PCtel Port' CPL. 2. Click on 'Uninstall' button. 3. Answer 'Yes' to the modem you want to delete. 4. Go to the 'Windows NT/Inf' directory. Delete the OEM*.INF and OEM*.PNF files the Pctel modem used. 5. Restart the computer. ------------------------------------------------------------------------------------------------- Section F: How to change default Com Port to other Com Port ================================================ To change to other com port, go to 'Control Panel'. Double-click on 'HSP Modem'. Click on the radio button corresponding to the Com Port you want to change. Click 'Apply'. ------------------------------------------------------------------------------------------------- Section G: Installation of Trio DataFax Voice and other applications ========================================================= To install Trio DataFax Voice and other bundled applications , run Inst32.exe. Follow the online screen to proceed with installation. For further information of Trio DataFax Voice, please refer to Relnotes.txt under D:\Trio\TDFV53\ in the installation CD. ------------------------------------------------------------------------------------------------- Section H: How to install Microsoft Fax in Windows 98 ========================================== If you are staying in US, go to directory D:\Tools\oldwin95\message\us in Windows 98 installation CD. For other countries go to D:\Tools\oldwin95\message\intl 1. First run wms.exe under the directory to install Microsoft Messaging. 2. Next run awfax.exe under the same directory to install Microsoft Fax. For further information on Microsoft Messaging and Microsoft Fax, read wms-fax.txt under the same directory. ------------------------------------------------------------------------------------------------- Section I: How to configure modem to work with DOS Box games or application ================================================================ 1. Run Dosbox utility, Dosbox.exe located at Windows directory. Or click on Start > Run and then key in dosbox.exe. 2. Choose an IRQ . Make sure this IRQ is still available and not used up by other device. You can check this by clicking on Start > Settings > Control Panel > System > Device Manager. Select Computer and then click on Properties. Those IRQ number shown is the one already used up. Once an IRQ is selected, select the corresponding com port. Normally it follows the below standard for Dos Box game/application. com port Corresponding IRQ no ======== ==================== com1 IRQ4 com2 IRQ3 com3 IRQ4 com4 IRQ3 4. In case your Dos Box game does not follow the above standard, please find out the IRQ corresponding to the com port you set from the game/application itself. 5. Click 'OK' and restart the computer. Now you can play Dos Box games or use a Dos Box application but remember to set the com port to what you have set in the Dosbox utility. Note : You don't have to use the Dosbox utility every time you want to play Dos Box game or use a Dos Box application. You just have to remember the last settings in Dosbox utility and set it accordingly. ------------------------------------------------------------------------------------------------- Section J: Technical Support ================= *********************************************************** * In case you encounter any problem with our products, * * please quote the following model(s) when calling our * * Technical Support : * * MSP5800-U PCI Modem * *********************************************************** ------- The End ---------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.