\HELP\SCO\SCOOPEN.TXT
FN300 series 10/100M PCI Network Adapter
---------------------------------------------
MDI Driver Installation for SCO OpenServer version 5.0
------------------------------------------------------
Installation Procedure
----------------------
1. Login SCO OpenServer as root user. (On maintenance mode)
2. Using "custom" to install the driver
A. Prepare an image file
Copy "FN311mdi" onto SCO OpenServer and rename it to "VOL.000.000"
# mkdir /usr/test
# mount -f DOS /dev/fd0 /mnt
# cp /mnt/<PATH>/FN311mdi /usr/test/VOL.000.000
<PATH> is the driver directory.
B. Execute "custom"
/* A menu selection screen will be popped up */
Using [->] key to move cursor to "Software" menu item then
press [] key to get into pull down menu then move to
"Install New..." and press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍ?Begin Installation on scosysv ÍÍÍÍÍÍÍÍÍÍ?
? ?
? What host (machine) do you want to install from? ?
? ?
? ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ?
? ?*> From scosysv ??
? ? > From another host ??
? ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ?
? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
º[ Continue ] [ Cancel ] [ Help] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Select From scoopen and use [TAB] key to move cursor to [Continue]
then press [ENTER] key and press [] key to get into pull down menu
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
? ?
? Insert media, and select media device. ?
? ?
? ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ?
? Media Device:³|Floppy Disk Driver 0_____________________|v??
? ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ?
? ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º ?
? º³*Floppy Disk Driver 0 ³º ?
? º³ Media Images ³º ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
-> Select "Media Images" and use [TAB] key to move cursor to
[ Continue ] then press [ENTER] key then press [ENTER] key
again
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
? ?
?Enter the full path to the directory containing media images. ?
? ?
?Image Directory: |/usr/test________________________________________| ?
? ?
?Note: media images must follow the naming convention VOL.000.000,etc.?
? ?
? ?
? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] [ Cancel ] [ Help ]?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
-> Input the path name where VOL.000.000 is located as above
path name is /usr/test
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
? ?
?Installing: FN300 series 10/100M PCI Network Adapter ?
? ?
?Install the selected software or patches. ?
? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
º[ Install ] [ More Option ] [ Cancel ] [ Help ] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Using [TAB] key to move cursor to [ Install ] then press [ENTER] key
After the installation process the following message is displayed,
ÉÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍ?
? Installation complete ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
? [ OK ] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Press [Enter] key then you will find out that
FN300 series 10/100M PCI Network Adapter
is added to the package list
Using [<-] key to move cursor back to "Host" menu item then
press [] key to get into pull down menu then move to "Exit"
then press [ENTER] key
Now that the driver is installed in the system successfully.
5. Using "netconfig" to configure the driver
/* A menu selection screen will be popped up */
At "Hardware" menu item press [] key to get into pull down menu then
move to "Add new LAN adapter" then press [ENTER] key
If you got a PCI NIC inserted on your machine, it will list as following:
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºThe following adapters have been found: ?
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿?
º³* Adapter Controller - PCI Bus ³º
º³ ³º
º³ ³º
º³ ³º
º³ ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ?
º[ Configure hardware not listed above... ] ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
º[ Continue ] [ Cancel ] [ Help ]?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Using [TAB] key to move to "Configure hardware not listed above..."
then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
ºSelect network adapter to be added: ?
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³* 3Com EtherLink 16/16TP Adapter ^?
º³ . *?
º³ . *?
º³ . *?
º³ . *?
º³ *?
º³ FN300 series 10/100M PCI Network Adapter *?
º³ . ³º
º³ . ³º
º³ . ³º
º³ . v?
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] [ Cancel ] [ Help ]?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [] key to move to "FN300 series 10/100M PCI Network Adapter" then
press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
? ?
ºEnter the configuration of FN300 series 10/100M PCI Network Adapter: ?
? ?
? ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ?
? PCI Bus#: ³| 0_______________________|v? ?
? ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ?
? ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ?
? PCI Device#: ³| 0_______________________|v? ?
? ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ?
? ?
? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ??
º[ OK ] [ Cancel ] [ Help ] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
The above screen let you fill the information of where your PCI adapter
is located by specifying PCI Bus#, and PCI Device#.
Note: If you are not sure about the PCI parameters or your PCI Device#
can not be found in the list, leave them as default values.
Continue with the following installation. After the driver is
installed and the system re-linked, reboot the system. The driver
will search for the PCI Adapter automatically.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?Information ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
?-- Please verify adapter is set to the configuration just entered?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
? [ OK ] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect one networking product to be added to ?
ºPFN300 series 10/100M PCI Network Adapter: ?
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³ HW FN300 series 10/100M PCI Network Adapter ³º
º³* - SCO IPX/SPX ³º
º³ - SCO TCP/IP ³º
º³ ³º
º³ ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Add ] [ Cancel ] [ Help ]?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
? ?
? ?
? ?
? ?
? Local Host Name: |scoopen_____________| [ Advanced ]?
? IP Address: |192.9.200.1_________| Options... ?
? Netmask: |255.255.255.0_______| ?
ºBroadcast Address: |192.9.200.255_______| ?
? Domain Name: |scoopen.com_________| ?
? TCP connections: |256_________________| ?
? Pseudo ttys: |32__________________| ?
? ?
? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
? ?
?[ OK ] [ Cancel ] [ Help ]?
? ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Input the required information then use [TAB] key to move cursor to "OK"
then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
? ?
? ?
?The following products were successfully configured into the system ?
?SCO TCP/IP ?
?PCI Adapter WOL for RTL8139D - PCI Bus#0,PCI Device#13,PCI ?
? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ??
º[ OK ] [ Help ] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Press [ENTER] key
At "Hardware" menu item press [] key to get into pull down menu then
move to "Exit" then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
? The Unix Kernel must be re-linked before the changes?
??? made here will have an effect. ?
? Do you want to re-link the kernel now? ?
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ?
?[ YES ] [ NO ] ?
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ?
Press [ENTER] key
Do you want this kernel to boot by default (y/n) y
Do you want the kernel environment rebuilt (y/n) y
6. Reboot unix
# init 0
Another way to specify driver's PCI parameters
----------------------------------------------
Another way to modify PCI parameters is at booting
time, shown as below:
1. Specify PCI Bus#, PCI Device# and PCI Function#
Boot
: unix net.mdi=f3a(0) net.params=(pcb:0,pcd:14,pcf:0)
2. Auto-search PCI adapter card
Boot
: unix net.mdi=f3a(0)
Note: The IRQ number must match with the value set in ROM-BIOS
before you specify this value, please check it.
The IRQ for PCI bus can be accessed by pressing [DEL] key when
system is power on and choose the proper select item to set
IRQ for PCI bus.
Example: ROM PCI/ISA BIOS (2A4X5C31)
PCI/GREEN FUNCTION SETUP
AWARD SOFTWARE, INC.
Press [DEL] key --> PCI/GREEN FUNCTION SETUP
Slot 3 Using INT# : A-PIRQ1
.
.
.
PIRQ1# Connect IRQ: 5 By Single
~
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.