\HELP\README.TXT
FN300 series 10/100M PCI Network Adapter
---------------------------------------------
Introduction
------------
Thank you for purchasing the Fast Ethernet PCI adapter.
The adapter card has been developed by combining the latest 100BASE-TX
Fast Ethernet technology and peripheral component interface (PCI)
local bus technology.
Additionally,this adapter supports Wake-on-LAN feature in Windows 98SE,
ME,2000,and XP allowing the system with a adapter card to be
remotely configured. This adapter card supports PCI rev 2.1
systems which requires a 3-pin connector for system wake-up as well as
PCI rev 2.2 system which can be awakened by the PME# signal on the PCI
bus.There are two protocol boot rom supported. PXE and RPL protocol.
For example,PXE for winnt4.0 , Windows 2000 and RPL for novell
4.1x & 5.0 RPL Server
When the system boot ,press <shift> + <F10> to change
the mode of bootstrap.
Getting Started
---------------
A DOS installation/help program, DIAG.EXE, is provided for ease of setup
for normal users. DIAG.EXE will provide information on driver installation
for the appropriate network operating systems.
To run the installation/help program, simply run DIAG.EXE program in the
root directory of the driver disk. (eg. A:\DIAG<Enter>)
If the network operating system you are using is not covered by the
installation program, refer to the individual documentation provided
for root directory.
Revisions History
-----------------
Diskette Revision 2.00, 20030526
------------------------------
Initial release of the ZyXEL Communication Corporation FN300 series 10/100M PCI
Network Adapter
Trademarks
----------
Novell and NetWare are registered rademarks of Novell, Inc.
NetWare Client, NetWare DOS Requested, Novell DOS, Personal
NetWare,and ODI are trademarks of Novell, Inc.
Microsoft, Microsoft Windows, Windows 95, Windows98, Windows NT,Windows 2000
and Windows ME are registered trademarks of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.