NetWare/CLIENT32/CLIENT32.TXT Driver File Contents (FN311_2.0_Windows98_WindowsME_WindowsNT4.0_Windows2000_WindowsXP... ard.zip)

Driver Package File Name: FN311_2.0_Windows98_WindowsME_WindowsNT4.0_Windows2000_WindowsXP... ard.zip
File Size: 372.2 KB

\HELP\NETWARE\CLIENT32.TXT

                     FN300 series 10/100M PCI Network Adapter
                  ---------------------------------------------
             Novell Client 32 Driver Installation for DOS/Windows 3.11
             ---------------------------------------------------------

  Client 32 for DOS/ Windows 3.11
  -------------------------------

    Install DOS Client 32 Driver During Client 32 Installation
    ----------------------------------------------------------
    1.  Shut down the computer and install FN300 series 10/100M PCI Network Adapter
        into the system.
      
    2.  At MS-DOS prompt, start the Client 32 installation by executing
        the "INSTALL" command.

    3.  Follow the installation procedure of Novell NetWare Client 32.

    4.  In "Select a LAN Driver Type" window, select "32-bit" LAN driver.

    5.  In "32-Bit Network Board Drivers" window, select "USER SPECIFIED
        32-BIT DRIVER".

    6.  In "Insert The Driver Disk" window, input the drive/directory
        
          eg. A:\NETWARE\Client32

    7.  Select "FN300 series 10/100M PCI Network Adapter" .  Select the
        desired parameters, eg. NetworkMedia, Frame Type, Node Address,
        and continue with the installation procedure.

        Note: The LineSpeed default is Auto and the other options are

        Media Mode : the default is AUTO. (AUTO,
                          100FULL, 100HALF, 10FULL, 10HALF,)
                    
     8.  After the installation, a STARTNET.BAT batch file will be created.
        Please check the STARTNET.BAT file for the right parameters.


    Install Windows 3.1X Client 32 Driver During Client 32 Installation
    -------------------------------------------------------------------
    1.  In Microsoft Windows environment, run "SETUP" command to start
        Client 32 installation.

    2.  In "ODI Driver Selection" window, select "32 bit" mode and "Other
        Boards".

    3.  Enter the path and filename of the ODI driver in "ODI Driver Path"
        window.  For exmaple, C:\NETWARE\Client32\FN311.LAN.

    4.  Follow the installation steps of Novell NetWare Client 32.

    5.  After the installation, a STARTNET.BAT batch file will be created.
        Please check the STARTNET.BAT file contains the right parameters.


  Install Client 32 Driver After Novell NetWare Client 32 for
            DOS/Windows 3.1x is already installed
  -----------------------------------------------------------
  Copy the LAN driver, FN311.LAN, and the LDI file, FN311.LDI, from the
  \Client32 directory to the \Novell\Client32 directory, and use a text
  editor to edit the STARTNET.BAT file directly.

    Content of STARTNET.BAT (for 32-bit LAN driver)
    -----------------------------------------------
    SET NWLANGUAGE=ENGLISH
    C:\NOVELL\DOSCLNT\NIOS.EXE
    LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
    LOAD C:\NOVELL\CLIENT32\CMSM.NLM
    LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
    LOAD C:\NOVELL\CLIENT32\FN311.LAN FRAME=ETHERNET_802.2 SLOT=??
    LOAD C:\NOVELL\CLIENT32\FN311.LAN FRAME=ETHERNET_802.3 SLOT=??
    LOAD C:\NOVELL\CLIENT32\FN311.LAN FRAME=ETHERNET_II    SLOT=??
    LOAD C:\NOVELL\CLIENT32\FN311.LAN FRAME=ETHERNET_SNAP  SLOT=??
    LOAD C:\NOVELL\CLIENT32\IPX.NLM           <-- Binding driver
    LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM      <-- Finding server


    Parameters supported by the FN311.LAN o driver
    ---------------------------------------------------------
    SLOT       2  - Forces the driver to search for the specified board
    
    Media Mode : the default is AUTODETECT. 
    
  LOAD C:\NOVELL\CLIENT32\FN311.LAN MEDIUMTYPE=xx FRAME=ETHERNET_802.2 SLOT=??
  LOAD C:\NOVELL\CLIENT32\FN311.LAN MEDIUMTYPE=xx FRAME=ETHERNET_802.3 SLOT=??
  LOAD C:\NOVELL\CLIENT32\FN311.LAN MEDIUMTYPE=xx FRAME=ETHERNET_II    SLOT=??
  LOAD C:\NOVELL\CLIENT32\FN311.LAN MEDIUMTYPE=xx FRAME=ETHERNET_SNAP  SLOT=??
  LOAD C:\NOVELL\CLIENT32\IPX.NLM           <-- Binding driver
  LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM      <-- Finding server

      MEDIUMTYPE=xx: 10HALF
                     10FULL
                     100HALF
                     100FULL 

server: web5, load: 1.31