This file contains a short description of the following items: - Contents of the ZIP file - Additional documentation - Use and installation of the firmware and the configuration software Diese Datei enthält eine kurze Beschreibung zu den Punkten: - Inhalt der ZIP-Datei - Weitere Dokumentationen - Verwendung und Installation der Firmware und der Konfigurationssoftware. ENGLISH: In addition to this file the ZIP file includes the following files: 1) Firmware file: NTDPSMBR.N34 2) Configuration File: NTDPSMBR.DBM 3) Description of the gateway function: NTDPSMBR_en.pdf The firmware file is for the protocol conversion PROFIBUS-DP Slave to Modbus RTU Additional documentation (not included): - Booklet netTAP netTAP Booklet.pdf - SYCON.net with ComPro DTM for netTAP ComProDTM_en.pdf These documentations are available for download on our home page: www.hilscher.com, go to Downloads > Manuals and Notes The firmware can be used with the following devices: NT 30-DPS-RSI2\D9F NT 30-DPS-RSI2\D9M NT 30-DPS-RSI2\CCE NT 30-DPS-RSI4\D9F NT 30-DPS-RSI4\D9M NT 30-DPS-RSI4\CCE NT 30-DPS-RS2\D9F NT 30-DPS-RS2\D9M NT 30-DPS-RS2\CCE NT 30-DPS-RS4\D9F NT 30-DPS-RS4\D9M NT 30-DPS-RS4\CCE Configuration software: SYCON.net for netTAP The configuration software came on a CD ROM along with the netTAP. SYCON.net has to be installed first before you connect the netTAP to the PC. The installation process is described in the document of ComProDTM_en.pdf. Installation Steps: 1) Copy the file NTDPSMBR.N34 (firmware file) to: C:\Program files\Hilscher GmbH\SYCONnet\ComProDTM\Firmware (default path) 2) Copy the file NTDPSMBR.DBM (database file) to: C:\Program files\Hilscher GmbH\SYCONnet\ComProDTM\DBM (default path) 3) SYCON.net allows downloading both files (firmware and configuration) to the netTAP via the serial diagnostic port. For the download the cable CAB-NN is required. IMPORTANT HINT: FOR PROPER FUNCTION, BOTH FILES HAVE TO BE COPIED IN THE DIRECTORIES AS MENTIONED ABOVE AND MUST NOT BE RENAMED! DEUTSCH: Die ZIP-Datei enthält neben dieser Readme-Datei folgende Dateien: 1) Firmware-Datei: NTDPSMBR.N34 2) Konfigurationsdatei: NTDPSMBR.DBM 3) Beschreibung der Gatewayfunktion: NTDPSMBR_de.pdf Die Firmware-Datei ist für die Protokollumsetzung PROFIBUS-DP Slave nach Modbus RTU Weitere zugehörige Dokumentationen (nicht enthalten): - Booklet netTAP netTAP Booklet.pdf - SYCON.net mit ComPro DTM für netTAP ComProDTM_en.pdf Diese Dokumentationen stehen zum Download auf unserer Homepage bereit: www.hilscher.com, Menü Downloads > Handbücher Die Firmware-Datei kann mit folgende Geräten verwendet werden: NT 30-DPS-RSI2\D9F NT 30-DPS-RSI2\D9M NT 30-DPS-RSI2\CCE NT 30-DPS-RSI4\D9F NT 30-DPS-RSI4\D9M NT 30-DPS-RSI4\CCE NT 30-DPS-RS2\D9F NT 30-DPS-RS2\D9M NT 30-DPS-RS2\CCE NT 30-DPS-RS4\D9F NT 30-DPS-RS4\D9M NT 30-DPS-RS4\CCE Konfigurations-Software: SYCON.net für netTAPs Die Konfigurationssoftware wurde auf einer CD-ROM mit dem netTAP geliefert. Es wird vorausgesetzt, dass SYCON.net bereits auf dem PC installiert ist. Die Installation ist im Dokument ComProDTM_en.pdf beschrieben. Zur Installation: 1) Kopieren Sie die Firmware-Datei NTDPSMBR.N34 nach: C:\Programme\Hilscher GmbH\SYCONnet\ComProDTM\Firmware (typischer Pfad) 2) Kopieren Sie die Konfigurationsdatei NTDPSMBR.DBM nach C:\Programme\Hilscher GmbH\SYCONnet\ComProDTM\DBM (typischer Pfad) 3) Mit der Konfigurationssoftware 'SYCON.net mit ComPro DTM für netTAP' kann Firmware und Konfiguration in den netTAP geladen werden. Ein Firmwaredownload kann immer nur über die serielle Diagnoseschnittstelle ausgeführt werden. Zum Laden der Dateien wird das Kabel CAB-NN benötigt. WICHTIGER HINWEIS: DIE DATEIEN MÜSSEN IN DIE VERZEICHNISSE WIE OBEN GENANNT KOPIERT WERDEN UND DÜRFEN NICHT UMBENANNT WERDEN! File/Datei: Rev 01Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.