readme_nt30dpsrs_dpsnvr.txt Driver File Contents (nt30dpsrs_dpsnvr_1011.zip)

This file contains a short description of the following items:
- Contents of the ZIP file
- Additional documentation
- Use and installation of the firmware and the configuration software

Diese Datei enthält eine kurze Beschreibung zu den Punkten:
- Inhalt der ZIP-Datei
- Weitere Dokumentationen
- Verwendung und Installation der Firmware und der Konfigurationssoftware.


ENGLISH:

In addition to this file the ZIP file includes the following files:
1) Firmware file:                          NTDPSNVR.N34
2) Configuration File:                     NTDPSNVR.DBM
3) Description of the gateway function:    NTDPSNVR_en.pdf

The firmware file is for the protocol conversion
	PROFIBUS-DP Slave to 3964R

Additional documentation (not included):
- Booklet netTAP                           netTAP Booklet.pdf
- SYCON.net with ComPro DTM for netTAP     ComProDTM_en.pdf
These documentations are available for download on our home page:
www.hilscher.com, go to Downloads > Manuals and Notes

The firmware can be used with the following devices:
  NT 30-DPS-RSI2\D9F 
  NT 30-DPS-RSI2\D9M 
  NT 30-DPS-RSI2\CCE 
  NT 30-DPS-RSI4\D9F 
  NT 30-DPS-RSI4\D9M 
  NT 30-DPS-RSI4\CCE 
  NT 30-DPS-RS2\D9F 
  NT 30-DPS-RS2\D9M 
  NT 30-DPS-RS2\CCE 
  NT 30-DPS-RS4\D9F 
  NT 30-DPS-RS4\D9M 
  NT 30-DPS-RS4\CCE 

Configuration software: SYCON.net for netTAP
The configuration software came on a CD ROM along with the netTAP.

SYCON.net has to be installed first before you connect the netTAP to the PC.
The installation process is described in the document of ComProDTM_en.pdf.

Installation Steps:
1) Copy the file NTDPSNVR.N34 (firmware file) to:
C:\Program files\Hilscher GmbH\SYCONnet\ComProDTM\Firmware (default path)

2) Copy the file NTDPSNVR.DBM (database file) to:
C:\Program files\Hilscher GmbH\SYCONnet\ComProDTM\DBM (default path)

3) SYCON.net allows downloading both files (firmware and configuration) to
   the netTAP via the serial diagnostic port. For the download the cable
   CAB-NN is required.

IMPORTANT HINT:  FOR PROPER FUNCTION, BOTH FILES HAVE TO BE COPIED IN THE
                 DIRECTORIES AS MENTIONED ABOVE AND MUST NOT BE RENAMED!



DEUTSCH:

Die ZIP-Datei enthält neben dieser Readme-Datei folgende Dateien:
1) Firmware-Datei:                      NTDPSNVR.N34
2) Konfigurationsdatei:                 NTDPSNVR.DBM
3) Beschreibung der Gatewayfunktion:    NTDPSNVR_de.pdf

Die Firmware-Datei ist für die Protokollumsetzung
	PROFIBUS-DP Slave nach 3964R

Weitere zugehörige Dokumentationen (nicht enthalten):
- Booklet netTAP                        netTAP Booklet.pdf
- SYCON.net mit ComPro DTM für netTAP   ComProDTM_en.pdf
Diese Dokumentationen stehen zum Download auf unserer Homepage bereit:
www.hilscher.com, Menü Downloads > Handbücher

Die Firmware-Datei kann mit folgende Geräten verwendet werden:
  NT 30-DPS-RSI2\D9F 
  NT 30-DPS-RSI2\D9M 
  NT 30-DPS-RSI2\CCE 
  NT 30-DPS-RSI4\D9F 
  NT 30-DPS-RSI4\D9M 
  NT 30-DPS-RSI4\CCE 
  NT 30-DPS-RS2\D9F 
  NT 30-DPS-RS2\D9M 
  NT 30-DPS-RS2\CCE 
  NT 30-DPS-RS4\D9F 
  NT 30-DPS-RS4\D9M 
  NT 30-DPS-RS4\CCE 

Konfigurations-Software:  SYCON.net für netTAPs
Die Konfigurationssoftware wurde auf einer CD-ROM mit dem netTAP geliefert.

Es wird vorausgesetzt, dass SYCON.net bereits auf dem PC installiert ist.
Die Installation ist im Dokument ComProDTM_en.pdf beschrieben.

Zur Installation:
1) Kopieren Sie die Firmware-Datei NTDPSNVR.N34 nach:
   C:\Programme\Hilscher GmbH\SYCONnet\ComProDTM\Firmware (typischer Pfad)

2) Kopieren Sie die Konfigurationsdatei NTDPSNVR.DBM nach
   C:\Programme\Hilscher GmbH\SYCONnet\ComProDTM\DBM (typischer Pfad)

3) Mit der Konfigurationssoftware 'SYCON.net mit ComPro DTM für netTAP' kann
   Firmware und Konfiguration in den netTAP geladen werden.
   Ein Firmwaredownload kann immer nur über die serielle Diagnoseschnittstelle
   ausgeführt werden. Zum Laden der Dateien wird das Kabel CAB-NN benötigt.

WICHTIGER HINWEIS: DIE DATEIEN MÜSSEN IN DIE VERZEICHNISSE WIE OBEN GENANNT
                   KOPIERT WERDEN UND DÜRFEN NICHT UMBENANNT WERDEN!



File/Datei: Rev 01
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.04