1. lne100txv4.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (lne100txv4.exe)

         Linksys LNE100TX Fast Ethernet Adapter (LNE100TX v4)
                NetWare 32-bit ODI Driver Installation
              =======================================

                    Copyright (C) 2000 by Linksys
                        All rights reserved.

NetWare DOS ODI Server Driver Installation (NetWare 3.11)
=========================================================

Requirements:
-------------
        Linksys (LNE100TX v4) Driver Diskette  (LNE100TX.LAN)

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the Novell NetWare 386 v3.11 server is properly installed.
Similarly, your adapter should also be properly installed
in your workstation.

1. Insert the Linksys (LNE100TX v4) Driver Diskette into drive A
   and check the contents of subdirectory  \NW31X
   It should contain the following file:

   LNE100TX.LAN      Novell NetWare V4.X, 3.1X Server Driver for 
                  Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4).
   AUTOEXEC.NCF
   ETHERTSM.NLM
   LSLENH.NLM
   MONITOR.NLM
   MSM31X.NLM
   NBI31x.NLM
   PATCHMAN.NLM

2. Copy the above LAN files from the Driver Disk into the NetWare 386
   subdirectory of your server.

3. Run SERVER.EXE from your server. You will see a series
   of NetWare messages onscreen.

4. Before load server driver you must load above those extension name
   named NLM driver. You can reference the autoexec.ncf file in
   \NW31X directory.

5. When the NetWare 386 prompt appears (indicated by a colon),
   load your server driver. Simply type:

   : LOAD [c:]LNE100TX FRAME=ETHERNET_802.3 [Speed/Duplex Type] <Enter>

   Command Syntax : LOAD [c:]<Driver Name> FRAME=<FRAME TYPE> [Speed/Duplex Type]
    
   Speed/Duplex Types: 10HD          ......      10Mbps HalfDuplex
                       10FD          ......      10Mbps HalfDuplex
                       100HD         ......     100Mbps HalfDuplex
                       100FD         ......     100Mbps HalfDuplex
                       AUTOSENSE     ......     Auto Sense

6. Bind IPX to the Linksys LAN driver. At the NetWare server
   prompt, type:

   :BIND IPX LNE100TX <Enter>

7. After  pressing <Enter> the computer prompts  you  for
   the Network Number. For details on how to assign this
   number,  please consult your NetWare 386  Installation
   Manual.

NetWare DOS ODI Server Driver Installation (NetWare 3.12)
=========================================================

Requirements:
-------------
        Linksys (LNE100TX v4) Driver Disk  (LNE100TX.LAN)

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the Novell NetWare 386 v3.12 server is properly installed.
Similarly, your adapter should also be properly installed
in your workstation.

1. Insert the Linksys Driver Disk into drive A
   and check the contents of subdirectory  \NW31X
   It should contain the following file :

   LNE100TX.LAN         Novell NetWare V4.X, 3.1X Server Driver for
                     Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4).
   ETHERTSM.NLM
   MSM31X.NLM

2. copy the above files into the NetWare 386 subdirectory of your server.

3. Run SERVER.EXE from your server. You will see a series
   of NetWare messages onscreen.

4. Before load server driver you must load above those extension name
   named NLM driver. You must load msm31x.nlm firstly. Then load
   ethertsm.nlm.

5. When the NetWare 386 prompt appears (indicated by a colon),
   load your server driver. Simply type:

   : LOAD [c:]LNE100TX FRAME=ETHERNET_802.3 [Speed/Duplex Type] <Enter>

   Command Syntax : LOAD [c:]<Driver Name> FRAME=<FRAME TYPE> [Speed/Duplex Type]
    
   Speed/Duplex Types: 10HD          ......      10Mbps HalfDuplex
                       10FD          ......      10Mbps HalfDuplex
                       100HD         ......     100Mbps HalfDuplex
                       100FD         ......     100Mbps HalfDuplex
                       AUTOSENSE     ......     Auto Sense

6. Bind IPX to the Linksys LAN driver. At the NetWare server
   prompt, type:

   :BIND IPX LNE100TX <Enter>

7. After  pressing <Enter> the computer prompts  you  for
   the Network Number. For details on how to assign this
   number,  please consult your NetWare 386  Installation
   Manual.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.