---------------------------------------------------------
"ZyXEL omni.net LCD Plus" USB Device Drivers, ver. 1.03
September 10, 1999
---------------------------------------------------------
(c) Copyright ZyXEL Communications Corporation, 1999
All Right Reserved.
This software disk contains the USB device drivers for the ISDN TA
model: "ZyXEL omni.net LCD Plus"
It provides a standard 32-bit Windows98 communication interface for the
USB device and ensures that the USB device is treated the same as any
other traditional RS232 serial interface TA.
Contents of this driver disk:
==============================
1. omni.net LCD Plus USB device driver for Windows98.
2. VCOMM port driver for Windows98.
3. Serial port enumerator driver for Windows98
4. ISDN Modem information file (INF) for Windows98.
System Requirements:
=====================
1. IBM Personal Computer (or 100% compatible) with Pentium or better CPU.
2. At least 16 MB of RAM
3. Universal Serial Bus (USB) Port.
4. Windows98 (Second Edition) operating system.
5. "ZyXEL omni.net LCD Plus" (ISDN TA with both RS232 and USB interfaces).
Main Features:
===============
1. Supports omni.net LCD Plus (USB) to work in Windows98 (Second Edition).
2. Easy installation with few user intervention.
3. Support Hot-pluggable plug and play for Windows98 environment.
4. Run under the legacy communication applications that support serial port.
Installation:
==============
1. Connect omni.net LCD Plus to the USB port of the PC, or a USB hub which
is connected to the PC's USB port.
2. If the device is not power on, please power on it.
3. Windows98's Plug & Play will search for the device driver when the first
installation. Please insert the disk, and you only need to click "Next"
button.(At most check the location of USB device drivers)
4. The "Add New Hardware Wizard" will copy all required driver program
into the Windows98 system.
5. At the end, click "Finish" to complete the installation.
6. Finally, a virtual COM port (USB COM Port) and a Modem device(ZyXEL
omni.net LCD PLUS (USA), Plug&Play) are installed into your system.
Now you can let your device to work with any 32-bit Windows S/W
application which uses the standard RS232 COM port, and AT-Command
interface, ...including Dial-Up Networking, etc.)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.