README.TXT Driver File Contents (

                          Additional Information

                      MAP JAPAN MBM-56KF Version 1.20

   This file contains additional information and changes about the
   various software that was not available at printing time.

   AT Commands

   For Standard AND Enhanced AT Command Set, please refer to the document
   (ATCOMSET.DOC) in the \Windows directory.  To view this document, you 
   need to have Microsoft Words v6.0c or above.

   56K Connection

   This software has been specially cutomised to allow 56K connection 
   using æ-law modulation format used by most countries in the US and Asia
   (e.g. Japan etc.).  If you are unable to achieve 56K data connection
   (depending on the line condition, in most cases, connection at speed 
   around 44K to 50K is more reasonable), please check up with your local
   ISP for details.

   In view of various countries communication standard, a utility
   (SETCNTY.EXE) for setting a and æ law is included in this version of
   setup.  This utility will be copied into \Windows directory and will 
   be executed immediately after modem installation for setting the modem
   to the respective country.  The various country supported are US, Japan,
   Hong Kong, Singapore and Malaysia standards.

   Note : As for Hong Kong having optional standards, if problems encountered
   in 56K connection, simply run the SETCNTY.EXE in \Windows directory and
   select the other Hong Kong option.(HongKong (a) or HongKong (æ)).

        *  In case you encounter any problem with our products,   *
        *  please quote the following model(s) when calling our   *
        *  Technical Support :                                    *
        *                              MAP JAPAN MBM-56KF Modem   *

                         -------  The End  ---------
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 4.75