Additional Information
MM MS5000-U Data+Fax+Voice Modem Card Ver 1.00
Installation on Win NT 4.0 Platform
====================================
Please make sure that your WinNT 4.0 is updated to the latest Service Pack
and the WinNT 4.0 Plug & Play is enabled before installing the driver for
MS5000 PnP Modem Card.
1. NT 4.0 will automatically detect the MS5000 PnP Modem Card
and displays the "New Hardware Found" dialog box.
2. Insert the installation diskette provided into either drive
A or B.
3. Select the "Driver from disk provided by Hardware manufacturer
option and click OK.
4. Type A:\ (or B:\) in the combo box and click OK.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- Ports - Setting and click on "Advanced" button followed by the
Resource tab. You can change the settings for both comport and interrupt.
For choosing interrupts, you can select IRQ 3,4,5,10,11,15 depending
which are available.
For further details, please refer to Trouble-shooting section in Windows NT.
Modem AT Command Set
====================
The AT Command Instructions Set for the Modem hardware is now available
in Microsoft Word format (ATCOMSET.DOC). It is available in the software
diskette provided from manufacturer. This document has also been copied
into \Winnt directory during installation.
Others
======
Please note that:-
1. Win NT 4.0 does not support Fax and Voice operation.
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* MS5000-U Modem Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.