Additional Information
56K ITU-T V.90 Standard & K56flex Modem
EM3850 (US) (B) Version 1.11
============================
EM3850-U can be set up on WIN NT 4.0 PNP platforms only.
This file contains additional information and changes about the various
software that is not available at printing time.
Installation in WIN-NT 4.0 PNP
==============================
If you are installing the modem as an upgrade to your older modem in the
system. Please remember to remove the old modem device entry from the
Modem icon from the NT's Control Panel and follow the below procedure to
install fr your new 56K Modem device.
If you are installing the modem for the first time, follow the below steps
to get the modem istalled:
1. Under Windows NT's control panel, select "Modem" icon and click on
the <Next> button and the modem wizard will start to check and detect
for the Communication port where the modem was attached. It will then
display "Standard Modem" been detected.
2. Click on the <Change> and follow by <Have Disk> buttons to install the
"EM3850-U 56K Modem" Driver by typing the path "\A:" in the manufacturer
Driver Disk location in the Wziard.
3. Next, click <OK> to select "EM3850-U 56K Modem" from the screen and to
complete the driver installation follow by clicking on the <Next> and
<finish> buttons. The modem driver is now installed onto the appropriate
comm port and the modem is now ready for operation.
AT Commands
===========
For Standard AND Enhanced AT Command Set, please refer to the document
(ATCOMSET.DOC) in the installation disk. To view this document, you
need to have Microsoft Words v6.0c or above.
Overview
========
By default a server supporting V.90 and K56flex will always indicate
V.90 support through V.8. Assuming the server and client support both
V.90 and K56flex, the client modem makes the decision of preference
between V.90 and K56flex. This preference is controlled via AT+MS command.
By default the client will select V.90 before K56flex.
V.90 Connection
===============
The client modem will detect if the server is A-law or m-law through the
received INFO sequence, and will automatically configure itself accordingly.
56K Connection
==============
The client modem will automatically select A-law or m-law through V.8bis
if the server only accepts K56 connection.
This software has been specially cutomised to allow 56K connection using
æ-law modulation format used by most countries in the US and Asia (e.g.
Japan etc.). If you are unable to achieve 56K data connection (depending
on the line condition, in most cases, connection at speed around 44K to
50K is more reasonable), please check up with your local ISP for details.
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* EM3850-U (B) Modem *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.