=========================================================== IBM Corporation April, 2001 IBM Wireless LAN Client Manager Variant 1 Version: 1.76 =========================================================== This README.TXT covers information that was not yet known or available when the user documentation shipped with this product was written. This text file includes update information, additional installation instructions, limitations to the current version of the product, and suggestions to solve known issues or problems. TABLE OF CONTENTS. 1. SOFTWARE DESCRIPTION 2. SYSTEM REQUIREMENTS 3. NEW IN THIS RELEASE 4. INSTALLATION NOTES 5. TECHNICAL CONSTRAINTS 6. KNOWN ISSUES 7. TECHNICAL SUPPORT ----------------------------------------------------------- 1. SOFTWARE DESCRIPTION 1.1 About this software The IBM Client Manager a diagnostic tool that you can use to verfiy the quality of your wireless radio connection to the IBM Wireless LAN network. The IBM Client Manager tool can be installed on any computer running the MS-Windows 95, 98, ME, NT4 or 2000 operating system, which has been equipped with a IBM Wireless LAN PC Card. 1.2 Files Installed The IBM Client Manager tool installation is managed via an installation wizard. You can choose to start the installation wizard by double- clicking the setup.exe file which can be found: - On your IBM Client Software CD-ROM in the folder: \pc_card\software\Cl_Mgr - If you did download an update from the website: xxxx\Cl_Mgr where xxxx is the directory in which the files where you placed after extracting them from the downloaded file. The installation wizard will automatically install the program files in the following directory on the hard disk of your computer: c:\program files\IBM\Wireless LAN\Client Manager Optionally you may choose to select another folder or hard disk drive for installation of the Client Manager software. The following files will be installed in the specified directory: * CMIBM.EXE * CMIBM.HLP * LICENSE.TXT * README.TXT ----------------------------------------------------------- 2. SYSTEM REQUIREMENTS 2.1 Operating System To install and run the IBM Client Manager software you will needs the Microsoft Windows 95, 98, ME, NT4 or 2000 operating system. 2.2 Free Disk Space The installation of the IBM Client Manager program requires a free disk space of approximately 3.5 Mb: * 400 Kb for the Client Manager application ----------------------------------------------------------- 3. NEW IN THIS RELEASE 3.1 Version 1.76 The following functionality has been added: - USB support The following problems have been solved: - The combobox item texts in the sitemonitor screen. In the past one line showed (dB)(dBm)(dBm) - Profile selection list of taskbaricon menu. When a "empty" profile is created in the Add/Edit profile dialog the current profile was not indicated correctly. - "sticking" modem speed in status screen. After changing from a Residential gateway profile with modem connection active, the modem speed text was not removed from the status screen. - Missing station name(s) in linktest selection screen when in peer to peer mode. - After uninstall some files would stay behind (modem.txt, aplist.txt and .gid file) 3.2 Update Release 1.58 The following functionality has been added: - Disable/Enable Radio The following problems have been solved: - Changing the configuration profile using the combo box. In previous versions this did not always produce the wanted result. - Update of the Access Point name. After a configuration profile change or going out of range of the AP and coming back into range the Access Point name was not always updated. - Modem Tray Icon (only when connected to a RG1000) In some cases the icon would show a modem error while the modem was still functioning correctly. - RG Modem menu item (only when connected to a RG1000) Sometimes this menu item would disappear after going to Add/Edit Configuration profile and then cancel the editting. - Log directory Default log directory has been changed to a subdirectory ("log") of the directory where the Client Manager is installed. - Encryption warning after card removal After a card removal an encryption warning was displayed. ----------------------------------------------------------- 4. INSTALLATION NOTES 4.1 Standard Installation Installation procedures are described in the 'Getting Started Guide' or 'User's Guide' that came with your IBM product. Please refer to these documents for information about installing and configuring your IBM product. IBM User documentation is also available in electronic format on the IBM Web Site (http://www.pc.ibm.com/options) You can download the documentation in Adobe's Acrobat Portable Document Format (PDF). To view or print PDF files you will need the freeware Acrobat Reader included on this CD-ROM. Alternatively you can download the Acrobat Reader from the Adobe Web Site (http://www.adobe.com/acrobat). 4.2 Removing the Client Manager Software To remove the Client Manager Software proceed as follows: 1) Click the "Start" button on your Windows task bar, point to "Settings" and select "Control Panel". 2) In the Control Panel window, double-click the "Add/Remove" icon to display the "Add/Remove Program Properties" window. 3) Scroll down the list of applications in the lower section of the "Install/Uninstall" tab, and select the item IBM Client Manager 4 Next click the "Add/Remove" button, and follow the instructions on your screen. ----------------------------------------------------------- 5. TECHNICAL CONSTRAINTS None. ----------------------------------------------------------- 6. KNOWN ISSUES Under Windows 98, after a suspend / resume operation, the Client Manager may incorrectly report that no communication is possible with the card. Also, the tool tray icon will incorrectly report no signal from an access point (no green bars). The exact message from the client manager (under the status section) will be: "Wireless network card not operational. No communication possible." This will probably be an erroneous message and the wireless LAN card will be still functioning correctly. If this occurs, you can exit the client manager and restart it to get rid of the message. This will also restore the signal indicator in the tool tray. ----------------------------------------------------------- 7. TECHNICAL SUPPORT 7.1 Finding Information On the IBM Web Site you can find the most recent device drivers, bridge firmware, software updates and user documentation. World Wide Web: HTTP://WWW.PC.IBM.COM/OPTIONS 7.2 Contact Technical Support Please see the PC Card User's Guide for information on contacting technical support. =========================================================== END OF FILEDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.