3Com (R) Corporation
3Com NIC Driver Update Kit for the
3C90x Fast EtherLink XL/EtherLink XL PCI Bus Master NIC Family
Version 5.1
This document describes the procedures for using the 3Com NIC Driver
Update Kit to upgrade your driver and diagnostic program to the version
of the software that was included on the EtherDisk (R) Diskette version
5.1 for the 3C90x Fast EtherLink XL/EtherLink XL PCI Bus Master NIC
Family. The 3Com NIC Driver Update Kit makes it possible to update
your network software without having to use the control panel. It can
also be used to update many systems on a network automatically by
using NetWare login scripts or software version management system.
Requirements
============
1) The update program will run on Windows 95, Windows 98, Windows NT 3.51
and Windows NT 4.0.
2) At least one 3C90x Fast EtherLink XL/EtherLink XL PCI Bus Master NIC
installed in the system.
Procedures for Updating the Driver and Diagnostic Program
=========================================================
1) Click Start.
2) In the start menu, click Run...
3) On the Run window, click Browse...
4) Find and click on the program Update.exe that came with this readme file
5) In the Browse window, click OK.
6) In the Run window, click OK.
7) On the 3Com NIC Driver Update Kit Windows, click Update Network Software.
8) Click OK when the update program finishes updating the network software.
9) Reboot your computer.
Installing the 3Com NIC Diagnostic Program
==========================================
On top of updating the NIC driver the 3Com NIC Driver Update Kit can
be used to install the 3Com NIC Diagnostic program. By using the command
line parameter /diag the diagnostic program will be installed while your
NIC driver is updated. If you have already updated your driver and decide
later to install the 3Com NIC Diagnostic program, you can run the update
program again, with the /diag parameter.
Update.exe /diag
The 3Com NIC Driver Update Kit in Unattended Mode
=================================================
The 3Com NIC Driver Update Kit has two command line parameters that allow
it to be used for unattended upgrades or to be used in software management
applications to push the upgrade to the end-stations. The first option,
/unattended, suppresses all dialog boxes so no user interaction is needed
to perform the upgrade.
The second, /preload, should only be used if the Driver Update Kit is
called during the installation of the Operating System, or OS, and delays
the installation of the 3Com Diagnostic Communication Protocol until the
OS has finished its installation. Since running the Driver Update Kit
during the OS install requires special software from Microsoft, like the
OPK, if you are unsure on whether to call the /preload parameter we suggest
you attempt the OS install without this parameter first and only if this
does not work should you use the /preload parameter.
Update.exe /unattended [/preload] [/diag]
; (%VER README.TXT - v5.1.0.3)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.