ntupdate.inf Driver File Contents (Prosetii.exe)

[StfVariableDetect]
    !STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
    !STF_PLATFORM  = "I386"        
    !STF_LANGUAGE   = "" ? $(!LIBHANDLE) GetLanguage
    LanguageList   = ^(LanguageID, 1)
    !STF_WINDOWSPATH    = "" ? $(!LIBHANDLE) GetWindowsNtDir
    !STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
    !STF_NTPATH         = $(!STF_WINDOWSPATH)
    !STF_COMPUTERNAME   = "" ? $(!LIBHANDLE) GetMyComputerName
    !STF_BUSTYPE        = "" ? $(!LIBHANDLE) GetMyBusType
    !STF_BUSTYPELIST    = "" ? $(!LIBHANDLE) GetMyBusTypeList
[StfVariableSyms]
    !ProcessorID_I386  = I386
    !ProcessorID_I486  = I486
    !ProcessorID_I586  = I586
    !ProcessorID_R4000 = R4000
    !ProcessorID_Alpha = Alpha_AXP
    !ProcessorID_PPC601  = PPC601
    !ProcessorID_PPC603  = PPC603
    !ProcessorID_PPC604  = PPC604
    !ProcessorID_PPC620  = PPC620
    !PlatformID_I386   = I386
    !PlatformID_Mips   = Mips
    !PlatformID_Alpha  = Alpha
    !PlatformID_PPC    = ppc
    !STF_PRODUCT        = WINNT    
    !STF_USERNAME       = ""       
    !STF_INSTALL_MODE   = "CUSTOM" 
    !STF_UPDGRADE       = NO       
    !STF_NCDETECT       = NO       
    !STF_NCOPTION       = ""       
    !STF_NCDETCARD      = 99999    
    !STF_NCDETINFO      = {}       
    !STF_NC_PARAMS      = {}       
    !STF_NC_PNAMES      = {}       
    !STF_SRCDIR_KEYED   = ""       
    !STF_SRCDIR_USED    = ""       
    !STF_SRCDIR_OVERRIDE = ""      
    !STF_SRCDIR_WINNT   = ""       
    !STF_TEMPLATE_CRITERR = "CRITERR2"
    !STF_TEMPLATE_NONCRITERR = "NONCRITERR2"
    !STF_INSTALLED_OS = {} ? $(!LIBHANDLE) GetInstalledOSNames
    FatalErrorIndex = 1
    Exit_Code = 0
[DoAskOemsetupSource]
    read-syms DoAskUpgradeSrcDlgText$(!STF_LANGUAGE)
    shell "subroutn.inf" DoAskSourceEx $($0) $(DlgText)
    Return $($R0) $($R1) $($R2) $($R3)
[Shell Commands]
     set-title "Windows NT Setup"
     Set !G:DebugOutputControl = 1
     LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
     Set !NCPA_HANDLE = ""
     Ifstr(i) $(!NTN_InfSection) != OemSoftwareInstall
         Debug-Output "NCPASHEL.INF: LoadLibrary on "$(!STF_CWDDIR)ncpa.cpl
         LoadLibrary "y" $(!STF_CWDDIR)ncpa.cpl !NCPA_HANDLE
     Endif
     Shell "subroutn.inf" ReadSetupHelpIds
     SetHelpFile "NetCfg.hlp" $(!MinimumID) $(!MaximumID)
     set-subst LF = "\n"
     StartWait
     read-syms StfVariableSyms
     read-syms StfVariableDetect
     detect StfVariableDetect
     Set !STF_NTPATH = $(!STF_WINDOWSSYSPATH)
     OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Control\ProductOptions" 33554432 KeyProductOption
     ifstr(i) $(KeyProductOption) != ""
         GetRegValue $(KeyProductOption) "ProductType" ProductTypeList
         set TempProductType = *($(ProductTypeList),4)
         ifstr(i) $(TempProductType) == "winnt"
             set !STF_PRODUCT = WINNT
         else-ifstr(i) $(TempProductType) == "lanmannt"
             set !STF_PRODUCT = LANMANNT
         else-ifstr(i) $(TempProductType) == "servernt"
             set !STF_PRODUCT = SERVERNT
         endif
         CloseRegKey $(KeyProductOptions)
     endif
     Debug-Output "NCPASHEL.INF: STF_SRCDIR is "$(!STF_SRCDIR)
     Debug-Output "NCPASHEL.INF: NTN_SRCPATH is "$(!NTN_SRCPATH)
     Ifstr(i) $(!NTN_SRCPATH) != ""
         Set !STF_ORIGINAL_SRCDIR = $(!STF_SRCDIR)
         Set !STF_SRCDIR = $(!NTN_SRCPATH)
         Debug-Output "NCPASHEL.INF: Reset STF_SRCDIR to:"$(!STF_SRCDIR)
     else
         OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
         Ifstr(i) $(KeyNt) != ""
             GetRegValue $(KeyNt) "SourcePath" SourcePathValue
             Set !STF_SRCDIR = *($(SourcePathValue),4)
             Debug-Output "NCPASHEL.INF: SourcePath retrieved is "$(!STF_SRCDIR)
             CloseRegKey $(KeyNt)
         Endif
         Ifstr(i) $(!STF_SRCDIR) == ""
           Set !STF_SRCDIR = "A:\"
         Endif
     Endif
     Set SetupInp = 0
     Set !NTN_InstallPhase = secondary
     ifstr(i) $(!NTN_OVERIDEPHASE) != ""
         Set !NTN_InstallPhase = $(!NTN_OVERIDEPHASE)
     Else
         OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\Setup" $(!REG_KEY_READ) KeySetup
         Ifstr(i) $(KeySetup) != ""
             GetRegValue $(KeySetup) "SystemSetupInProgress" SetupInpValue
             Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
                 Set SetupInp = *($(SetupInpValue),4)
                 Debug-Output "NCPASHEL.INF: SetupInp = "$(SetupInp)
             Endif
             Ifint $(SetupInp) == 1
                 Set !NTN_InstallPhase = primary
                 GetRegValue $(KeySetup) "WinntPath" SetupPathValue
                 Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
                     Set !STF_SRCDIR_WINNT = *($(SetupPathValue),4)
                     Debug-Output "NCPASHEL.INF: STF_SRCDIR_WINNT = "$(!STF_SRCDIR_WINNT)
                 Endif
             Endif
             CloseRegKey $(KeySetup)
         Endif
     EndIf
     Debug-Output "NCPASHEL.INF: NTN_InstallPhase = "$(!NTN_InstallPhase)
     Debug-Output "NCPASHEL.INF: NTN_InfSection = "$(!NTN_InfSection)
     Debug-Output "NCPASHEL.INF: NTN_InstallMode = "$(!NTN_InstallMode)
   Ifstr(i) $(!NTN_Origination) == "install"
        Goto skipdetection
   Endif
   Ifstr(i) $(!NTN_InfSection) == BindingsReview
        Goto skipdetection
   Endif
   Ifstr(i) $(!NTN_InstallMode) == install
        Goto startdetection
   Endif
   Ifstr(i) $(!NTN_InstallMode) == configure
        Goto startdetection
   Endif
   Goto skipdetection
startdetection = +
   Ifstr(i) $(!NCPA_HANDLE) != ""
       Debug-Output "NCPASHEL.INF: Enable netcard detection from NCPA.CPL"
       Shell "NCPARAM.INF" Param_ControlDetection DTSTART
   Endif
skipdetection = +
     ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I386)
         set !STF_PLATFORM = $(!PlatformID_I386)
         set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I486)
         set !STF_PLATFORM = $(!PlatformID_I386)
         set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I586)
         set !STF_PLATFORM = $(!PlatformID_I386)
         set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_R4000)
         set !STF_PLATFORM = $(!PlatformID_Mips)
         set !SYS      = $(!ProcessorID_R4000)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_Alpha)
         set !STF_PLATFORM = $(!PlatformID_Alpha)
         set !SYS      = $(!ProcessorID_Alpha)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC601)
         set !STF_PLATFORM = $(!PlatformID_PPC)
         set !SYS      = $(!ProcessorID_PPC601)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC603)
         set !STF_PLATFORM = $(!PlatformID_PPC)
         set !SYS      = $(!ProcessorID_PPC603)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC604)
         set !STF_PLATFORM = $(!PlatformID_PPC)
         set !SYS      = $(!ProcessorID_PPC604)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC620)
         set !STF_PLATFORM = $(!PlatformID_PPC)
         set !SYS      = $(!ProcessorID_PPC620)
     else
         set !STF_PLATFORM = $(!PlatformID_I386)
         set !SYS      = $(!ProcessorID_I386)
     endif
     Ifstr(i) $(!STF_LANGUAGE) != "ENG"    
         Debug-Output "NCPASHEL: Language not set to English; resetting"
         !STF_LANGUAGE = "ENG"
     Endif
     read-syms ProgressCopy$(!STF_LANGUAGE)
    Ifstr(i) $(!NTN_RegBase) == ""
        set !NTN_RegBase = ""
    Endif
    set !NTN_ServiceBase  = "SYSTEM\CurrentControlSet\SERVICES"
    Ifstr(i) $(!NTN_InstallMode) == ""
        Debug-Output "NCPASHEL:!NTN_InstallMode was not defined!"
        set !NTN_InstallMode  = "configure"
    Endif
    Ifstr(i) $(!NTN_SoftwareBase) == ""
        set !NTN_SoftwareBase = "SOFTWARE"
    Endif
    Ifstr(i) $(!NTN_Origination) == ""
        set !NTN_Origination = "ncpa"
    Endif
    Ifstr(i) $(!NTN_Infname) == ""
        goto fatalnoinfname
    Endif
    Ifstr(i) $(!NTN_InfSection) == ""
        Set !NTN_InfSection = "InstallOption"
    Endif
    ;ifstr(i) $(!NTN_InstallMode) == "Update"
    ;    Debug-Output "NCPASHEL.INF: Upgrade mode"
    ;    Shell "" DoAskOemsetupSource $(!STF_SRCDIR)
    ;    Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
    ;        goto shellerror
    ;    Endif
    ;    ifstr(i) $($R0) == STATUS_SUCCESSFUL
    ;        set !STF_SRCDIR = $($R1)
    ;    else-ifstr(i) $($R0) == STATUS_USERCANCEL
   ;         set Exit_Code = 1
   ;         goto end
    ;   else
    ;        set Exit_Code = 2
    ;        goto end
    ;    endif
        Set !NTN_Infname = $(!STF_SRCDIR)oemsetup.inf
    ;endif
    Ifstr(i) $(!NTN_InstallMode) == install
        set AddCopy  = YES
        set DoCopy   = YES
        set DoConfig = YES
    Else-ifstr(i) $(!NTN_InstallMode) == "Update"
        set AddCopy  = YES
        set DoCopy   = YES
        set DoConfig = NO
        Debug-Output "NCPASHEL.INF: Shell to "$(!NTN_Infname)
        Shell $(!NTN_Infname) ReturnOptions $(!STF_LANGUAGE)
        Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
           Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
           goto shellerror
        Endif
        Ifstr(i) $($R0) == "STATUS_SUCCESSFUL"
           IfContains(i) $(!NTN_InfOption) in $($R1)
              goto ContinueUpgrade
           endif
        endif
        read-syms IncorrectOemsetupDisk$(!STF_LANGUAGE)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(ErrorText)
        set Exit_Code = 1
        goto end
ContinueUpgrade = +
    Endif
    ifstr(i) $(!NTN_SRCPATH) != ""
        Set !STF_SRCDIR_OVERRIDE = $(!STF_SRCDIR)
    Endif
    Shell $(!NTN_Infname) $(!NTN_InfSection) +
         $(!STF_LANGUAGE) $(!NTN_InfOption) +
         $(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)
    Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
       Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
       goto shellerror
    Endif
    Debug-Output "NCPASHEL: INF return: "$($R0)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
        set Exit_Code = 0
    else-ifstr(i) $($R0) == STATUS_USERCANCEL
        set Exit_Code = 1
    else-ifstr(i) $($R0) == STATUS_NO_EFFECT
        set Exit_Code = 3
    else-ifstr(i) $($R0) == STATUS_REBIND
        set Exit_Code = 4
    else-ifstr(i) $($R0) == STATUS_REBOOT
        set Exit_Code = 5
    else
        set Exit_Code = 2
    Endif
    EndWait
    goto end
shellerror = +
   read-syms ShellError$(!$ShellCode)$(!STF_LANGUAGE)
   Debug-Output "NCPASHEL: SHELL ERROR: "$(Error)
   goto fatal
fatalnoinfname = +
   set FatalErrorIndex = 2
   goto fatalmsg
fatalmsg = +
   read-syms FatalError$(FatalErrorIndex)$(!STF_LANGUAGE)
   Debug-Output "NCPASHEL: FATAL ERROR: "$(Error)
   goto fatal
fatal = +
   read-syms FatalDlg$(!STF_LANGUAGE)
   ui start "FatalError"
   goto end
end = +
   Ifstr(i) $(!LIBHANDLE) != ""
       LibraryProcedure DontCare, $(!LIBHANDLE), DeleteAllConnections
   Endif
   Debug-Output "NCPASHEL: NCPASHEL: returning to NCPA"
   goto term
term = +
   Debug-Output "NCPASHEL: Bye."
   exit
[Source Media Descriptions]
    1 = "Windows NT Workstation CD-ROM" , TAGFILE = cdrom_w.40
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
2,	oemsetup.inf,	 SIZE=1000,	RENAME=$(!UG_Filename)
[LanguageID]
   ENG
[LanguageTextENG]
   "English (United States)"
[ProgressCopyENG]
    ProCaption   = "Windows NT Networking Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correctly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"
    PlatformID_I386 = I386
    PlatformID_Mips = Mips
    PlatformID_PPC  = ppc
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"
DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1
[FatalError1ENG]
Error = "Initialization failed"
[FatalError2ENG]
Error = "No INF file name given (NTN_Infname)"
[FatalError3ENG]
Error = "Invocation of INF file "$(!NTN_Infname)" failed"
[ShellError1ENG]
Error = "INF file "$(!NTN_Infname)" does not exist"
[ShellError2ENG]
Error = "INF file "$(!NTN_Infname)" does not have a section named "$(!NTN_InfSection)
[ShellError3ENG]
Error = "INF file "$(!NTN_Infname)", section "$(!NTN_InfSection)" has syntax errors"
[DoAskUpgradeSrcDlgTextENG]
    DlgText        = "Please enter the full path for the upgrade/update "+
                     "OEMSETUP.INF file. Then choose Continue."
[IncorrectOemsetupDiskENG]
    ErrorText      = "Update aborted. The OEMSETUP.INF does not support upgrade for the specified component."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.15