1. Iz2100ac.exe Driver
2. FLASHCOM.INI File Contents

FLASHCOM.INI Driver File Contents (Iz2100ac.exe)

[General]
FileCnt=3
ValidatorCnt=6
PostFlashCmdCnt=5

[Options]
AutoDetect=1
SplashBmp=zoomlogo.bmp
ShowRokBmp=1
SplashSecs=3
ShowTrace=0
OemAbout=For use with ZOOM V90 modems.\nZoom Telephonics, Inc. 
OemWarning=IMPORTANT: DO NOT Reset the modem.\n Click OK to start.
OemAboutWebPage=World Wide Web Site: http://www.zoomtel.com
OemAboutSupport=Tech Support Hotline: 1-800-631-3116
BlueScreen=1
ChkMdmRetries=2

AllowModuleBkup=1
AllowModuleEdit=1
AllowModuleSelect=1

[Files]
File01=XmUL003.s37,  1, LOADER,    Firmware Loader,    FlashLoader -- loads via XModem
File02=XmDL003.s37,  1, UNLOADER,  Firmware Unloader,  Used to make Firmware backup via XModem
File03=zoomc96e.s37, 2, FIRMWARE, V2.100-A Flash Upgrade File.,Domestic Firmware for Internal Comstar Modems ONLY.

[Validators]
Validator01= ATI3,x,K56_DLS,                 UNKNOWN,   Do NOT Allow External Modem upgrades
Validator02= ATI3,x,V34,                     UNKNOWN,   Do NOT Allow V34 modems to upgrade
Validator03= ATI3,*,ATI3,                    LOADFAULT, (Load Fault?), (Load Fault?), Maybe a modem in 'Load Fault' state
Validator04= ATI3,=,V1.002-K56_DLP-B Z201,   UPDATABLE, Zoom, Zoom 2818, Looking for Dom DF (v1002-B) code
Validator05= ATI3,=,V1.142-K56_DLP-A Z201,   UPDATABLE, Zoom, Zoom 2818, Looking for Dom DF (v1142-A) code
Validator06= ATI3,=,V2.100-K56_DLP-A Z201,   UPDATABLE, Zoom, Current Firmware File (for re-loading purposes)

[PostFlashCmds]
Cmd01=AT$$MF007393C3
Cmd02=AT
Cmd03=AT
Cmd04=AT
Cmd05=AT