V90WIZ.INI Driver File Contents (Xz2100fa.exe)

;; V90 Wizard INI file for Zoom EXTERNAL Modems.

[General]
FileCnt=4
ValidatorCnt=11
PostFlashCmdCnt=11
QuickCheckMode=1
BackupDone=0


[Options]
BlueScreen=5
OnePortOnly=0   ; faster testing if you set this to a modem port
ForceBackup=1   ;if 1, user can't get past the wizard page without backing up firmware
ShowTrace=0

LogoBmp=Zoomlogo.Bmp
OemAbout=For use with ZOOM EXTERNAL modems.  Zoom Telephonics, Inc.
OemAboutWebPage=Visit us on the web at www.zoomtel.com
OemAboutSupport=Tech Support Hotline: 1-617-423-1076
OemWarn=IMPORTANT: DO NOT Reset the modem.\n Click OK to start.
ShowAndWait=1
TimedShow=0
ShowIfItu=0

[Files]
;-----------------------------------------------------------------------
; filename, loadOrder, Flags, friendlyName[64], Description[256]
; Flags:  LOADER or UNLOADER or FIRMWARE
;  and:   TRANS or FINAL or BKUP (BKUP is added added by program)
;
; be sure to set [General] FileCnt=
; leading spaces are stripped
;
File01=XmUL003.s37,  1, LOADER,         Firmware Loader,      FlashLoader -- loads via XModem
File02=XmDL003.s37,  1, UNLOADER,       Firmware Unloader,    Used to make Firmware backup via XModem
File03=zoom3481.s37, 2, FIRMWARE TRANS, V2.013B-A Flash Upgrade File., Firmware for external data fax modem ONLY!
File04=zoom3248.s37, 2, FIRMWARE FINAL, ITU V.90 Firmware,    V.90 Driver for external data fax modem ONLY!

[Validators]
;-----------------------------------------------------------------------
; ATI3,op,Ati3Text,ugCode,Maker,Model,Remark
; op can be:=(equals), * (contains), ! (notContains),  et.al.
; ugCode can be: UPDATABLE, TRANS, FINAL, or UNKNOWN
;
; leading spaces are stripped
; be sure to set [General] ValidatorCnt=
;
Validator01=ATI3, =, ATI3, LOADFAULT, (Load Fault?), (Load Fault?), Maybe a modem in 'Load Fault' state
Validator02=ATI3, =, V0.516-K56_DLS-A Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF (v0516-A) code
Validator03=ATI3, =, V1.000-K56_DLS-A Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF (v1000-A) code
Validator04=ATI3, =, V1.120-K56_DLS-Q Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF Upgraded (v1120-Q) code
Validator05=ATI3, =, V1.120-K56_DLS-V Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF Upgraded (v1120-V) code
Validator06=ATI3, =, V1.140B2-K56_DLS-F Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF (v1140B2-F) code
Validator07=ATI3, =, V1.200-K56_DLS-D Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF (v1200-D) code
Validator08=ATI3, =, V1.200-K56_DLS-N Z201, UPDATABLE, Zoom, Zoom External modem, Looking for Dom DF (v1200-N) code
Validator09=ATI3, =, V2.013B-K56_DLS-A Z201, TRANS, Zoom, Zoom External modem, Been updated to Transitional
Validator10=ATI3, =, V2.081B-K56_DLS-I Z201, UPDATABLE, Zoom, Zoom External modem, Been updated to ITU v.90
Validator11=ATI3, =, V2.100F-K56_DLS-A Z201, FINAL, Zoom, Zoom External modem, Been updated to ITU v.90

[PostFlashCmds]
;-----------------------------------------------------------------------
; Cmd##=type,AT_Cmd_Text
; ugCode can be: BKUP, TRANS, or FINAL
; Commands send after a flashload.  Usually start these with AT
; leading spaces are stripped, max len is 128 per command; max cmds: 10
; be sure to set [General] PostFlasCmdCnt=
;
Cmd01=BKUP,AT$$MF003380A3
Cmd02=TRANS,AT$$MF003380A3
Cmd03=FINAL,AT$$MF003380A3
Cmd04=BKUP,AT%8ZTI8010ZTI8010
Cmd05=TRANS,AT%8ZTI8010ZTI8010
Cmd06=FINAL,AT%8ZTI8010ZTI8010
Cmd07=BKUP,AT%71234567812345678
Cmd08=TRANS,AT%71234567812345678
Cmd09=FINAL,AT%71234567812345678
Cmd10=FINAL,AT
Cmd11=FINAL,AT
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.23