w95osr2.txt Driver File Contents (Via_Lan_driver.zip)

*****************************************************************************
*                                                                           *
*                   VIA PCI 10/100Mb Fast Ethernet Adapter                  *
*                                                                           *
*                      NDIS4 Driver for Windows 95 OSR2                     *
*                                                                           *
*                           v2.60   Aug. 2000                               *
*                                                                           *
*****************************************************************************

Introduction:
=============

  This document shows you how to setup the driver and how to use the enhanced
  functions by setting the custom keywords.


Contents of the Subdirectory:
=============================

    FETND4.SYS          The NDIS4 driver for Windows 95 OSR2.
    FETND4.INF          The installation information file.
    W95OSR2.TXT         This file.


Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  (A:\SETUP.EXE) in DOS mode to make sure your connection with the network is
  correct.

    1. Turn the power of your PC on to boot from Windows 95 OSR2. Windows 95 OSR2 may
       auto-detect your new adapter installed, and the "New Hardware Found"
       dialogue box will appear. Select "Driver from disk provided by hardware
       manufacturer" to install driver from the diskette that come with your
       lan adapter.

       Note: If your new adapter is not detected by Windows 95 OSR2, you can open
       "My Computer" -> "Control Panel" -> "Networks" after Windows 95 OSR2 comes up,
       and select "Add adapter" -> "Have disk" to install driver from the
       diskette that come with your lan adapter.

    2. Insert the driver diskette into your floppy drive, and specify the
       path of the driver in the diskette(i.e. A:\W95OSR2) to copy the driver
       files to your system.

    3. When the driver installation is completed, restart Windows 95 OSR2.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.55