; ***** ALLEGRO ***** ;localization strings 100=ESS Aux 101=ESS CD-Audio 102=ESS Wavetable Synthesis 103=ESS Record 104=ESS Playback 105=ESS Mixer ;about mixer 106=20dB 107=Meter 108=Mute 109=Record Source 121=Volume Control 122=Vol 123=Recording Control 124=Rec ; for allegro, no Aux, no Video on playback mixer ; for Maestro3, Aux and Video on playback mixer ; for recording mixer ; only name is different ; Maestro3(Aux, Video) - Allegro(mono_mix, dmix) ; system source lines ; 125=Line 126=CD 127=Aux 128=Video 129=Microphone 130=Phone-In 131=Mixer 132=Monomix 133=Synth 134=Wave 135=MonoOut ; docking source lines ; 141=Line 2 142=CD 2 143=Aux 2 144=Video 2 145=Microphone 2 146=Phone-In 2 147=Mixer 2 148=Monomix 2 149=Dock Spkr 150=System Spkr 151=Power Management Enable 152=Level-1/Level-2 153=Mic-2 154=PC Speaker 155=PC Speaker 2 156=SPDIF In 157=IIS 2 158=Enable SPDIF 159=Enable 4 Speaker Out ;-------------------------------------------------------------------------- ; In order to take advantage of the following features, you have to ; 1) take out the first column of ";" from each line you want to use. ; 2) change the right hand side value of "=" depending on need. ; 3) take out ";" from the line containing ;config.ini ; between [allem3] and 1:allem3.sys in file "oemsetup.inf". ; (Here, a line starting with ";" means it's commented out.) ;-------------------------------------------------------------------------- ; ; ** START MIXER CUSTOMIZATION for NORMAL/DOCK/UNDOCK States ** ; ; Values are Double Word based in reversed format, ; (eg. "03,02,01,00" is really 00010203 Hex) ; ; Bit 0 is for Dock (1 = Enable Control, 0 otherwise) ; Bit 1 is for UnDock (1 = Enable Control, 0 otherwise) ; ; System CODEC Source Map Output (CD, LINE, AUX, etc.) SystemCD_Out=3 ; Undocked=YES, Docked=YES SystemLINE_Out=3 ; Undocked=YES, Docked=YES SystemAUX_Out=2 ; Undocked=YES, Docked=NO SystemVIDEO_Out=3 ; Undocked=YES, Docked=YES SystemMIC_Out=3 ; Undocked=YES, Docked=YES SystemPHONE_Out=0 ; Undocked=YES, Docked=YES SystemPCBEEP_Out=3 ; Undocked=NO, Docked=NO ;for M3I, set S/PDIF IN SystemIIS_Out=3 ; Undocked=NO, Docked=NO ; System CODEC Source Map Input (CD, LINE, AUX, etc.) SystemCD_In=3 ; Undocked=YES, Docked=YES SystemLINE_In=3 ; Undocked=YES, Docked=YES SystemMIC_In=3 ; Undocked=YES, Docked=YES SystemMIXER_In=3 ; Undocked=YES, Docked=YES ; Docking CODEC Source Map Output (CD, LINE, AUX, etc.) DockCD_Out=1 ; Undocked=NO, Docked=YES DockLINE_Out=1 ; Undocked=NO, Docked=YES DockAUX_Out=0 ; Undocked=NO, Docked=NO DockVIDEO_Out=0 ; Undocked=NO, Docked=NO DockMIC_Out=1 ; Undocked=NO, Docked=YES DockPHONE_Out=0 ; Undocked=NO, Docked=NO DockPCBEEP_Out=0 ; Undocked=NO, Docked=NO ; Docking CODEC Source Map Input (CD, LINE, AUX, etc.) DockCD_In=1 ; Undocked=NO, Docked=YES DockLINE_In=1 ; Undocked=NO, Docked=YES DockMIC_In=1 ; Undocked=NO, Docked=YES DockMIXER_In=1 ; Undocked=NO, Docked=YES ; ; ** OTHER CUSTOMIZATIONS ** ; ;PCMOutValue=0 ; 0 - 8 ;Mic20dBOn=0 ; 1/0 = enable/disable Mic Volume 20dB boost enableMPU401=1 ; 1/0 = enable/disable MPU401 ; ; comment out 2 lines for HP enableHwVol=0 ; 1/0 = enable/disable Hardware Volume Control SoftexAPM=1 ; 1/0 = enable/disable Softex Power Management Support ; ; Change the first 0 to 1 to enable secondary AC97 line out detection ; Disable secondary AC97 line out detection ;DetectDockingLineOut=1 ;DefaultPCSpeakerMute=0 ; 1/0 = default of PC Speaker is mute/unmute (* AC97 Codec ONLY *) ;EnableDockingAllinAllout=1 ; 1/0 = enable/disable All-in-All-out DefaultMasterVol=F000 ; hex value (0000-FFFF) ; ; allegro = 0x1800(ibm and ref), M3=0x1100 ;Eapd Support Mode=1 ;Eapd GPO Polarity And Port=0x1800 ; default is no SPDIF out ; Enable SPDIF out, remove the ";" ;EnableSPDIF=1 ; 00: To Pin #62 ; GPIO 11 for SPDIF-out ; 01: To Pin #2 ;SPDIF Out Pin Connect Mode=1 ; applied to only M3I.COMM ; 0/1: disable/enable SPDIFIN ;EnableSPDIFIN=1 ; docking stuff ;Enable Dock Detect=1 ;Dock Detect GPI Port=0x0e ; Enable the "Enable 4 Speaker" display on Advanced button under Wave ; This feature is mutually exclusive with docking so ; "Dock Detect GPI Port", "Enable Dock Detect", and etc.. ; must be disabled ; 0/1 Disable/Enable ;Enable 4 Speaker=1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.