1. l8cauw2k.exe Driver
  2. MDMM3COM.INF File Contents

MDMM3COM.INF Driver File Contents (l8cauw2k.exe)

 DOWNLOAD NOW
MDMM3COM.INF Driver Update Utility 
; Windows 2000 Modem Setup Information File
; Copyright (c) 2000 ESS Technology Inc.
; Manufacturer: ESS Technology Inc.

[Version]
Signature="$CHICAGO$"
Class=Modem
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Provider=%ESS%
DriverVer=05/09/2000,4.43.028
CatalogFile=a1.cat

[DestinationDirs]
ESM3COMM.CopyFiles = 12
DefaultDestDir  = 12    ;LDID_SYS \Windows\system dir

[Manufacturer]
%ESSMfgName% = ESS

;; Mechanism for excluding drivers from the "Add New Hardware" list.
[ControlFlags]
ExcludeFromSelect=PCI\VEN_125D&DEV_1989&SUBSYS_10491043; Allegro
ExcludeFromSelect=PCI\VEN_125D&DEV_1989&SUBSYS_0012103C; Hurricane

[ESS]
%ES56CVMPI% = Modem58,PCI\VEN_125D&DEV_1989&SUBSYS_10491043; Allegro
%ES56CVMPI% = Modem58,PCI\VEN_125D&DEV_1989&SUBSYS_0012103C; Hurricane

[Modem58.NT]                                       
AddReg=All, ESS.Reg, responses, DriverParams,All_Fax,Country.Reg
CopyFiles   = ESM3COMM.CopyFiles

[ESM3COMM.CopyFiles]
es56cvmp.sys,,,2

[SourceDisksNames]
1=%DiskName%,,

[SourceDisksNames.x86]
1=%DiskName%,,

[SourceDisksFiles]
es56cvmp.sys = 1 

[SourceDisksFiles.x86]
es56cvmp.sys = 1 


[DriverParams]
HKLM,SYSTEM\CurrentControlSet\Services\Edspport,Country,1,FF,00,14,00  ; country,pulse dial enable,speed knob (0x10-0x17)
HKLM,SYSTEM\CurrentControlSet\Services\Edspport,NoHighPitchWA,1,01 ; 
;HKLM,SYSTEM\CurrentControlSet\Services\Edspport,CodecType,1,01,00,00,00
  ; byte1- 0:no OpAmp, 1:with OpAmp / Krypton DAA
;HKLM,SYSTEM\CurrentControlSet\Services\Edspport,DAANegLogic,1,00,00,00,00
 ; byte1- 1: Active Low on Complex Impedanc (I/Obit8)
 ; byte2- 1: Active Low on Current Limit(I/Obit7)
 ; byte3- 1: Active Low on Ring Sensitivity(I/O bit4)
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country,RegionSetting,1,01;for HP only: country selection thru regional settings

[Modem58.NT.HW]
AddReg=DisconnectLowerFilter

[DisconnectLowerFilter]
HKR,,"LowerFilters",0x00010000,Edspport


[Modem58.NT.Services]
AddService = Edspport,0x00000000,essmodem.service

[essmodem.service]
DisplayName    = "EDSP Port Driver"
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_SYSTEM_START
ErrorControl   = 0                  ; SERVICE_ERROR_IGNORE
LoadOrderGroup = base
ServiceBinary  = %12%\es56cvmp.sys


[All]
HKR,,FriendlyDriver,,es56cvmp.sys
HKR,,DeviceType, 1, 02     ; INTERNAL MODEM, includes ISA + Enhanced Comm Slot
HKR,,DevLoader,,*ntkern
HKR,,NTMPDrver,0,es56cvmp.sys
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR,,PortSubClass,1,02
HKR,,PortDriver,,es56cvmp.sys
HKR,, CurrentCountry, 0x10001, 1        ; this entry calls the modem cpl COUNTRY drop down and displays the default country (Anguilla)
HKR, Countries, Country0, 0x10001, 1    ; a country (United State). this is also same as default above
HKR, Countries, Country1, 0x10001, 101  ; a country (Anguilla). this is also same as default above
HKR, Countries, Country2, 0x10001, 102  ; another country (Antigua)
HKR, Countries, Country3, 0x10001, 103  ; another country (bahamas) 
HKR, Countries, Country4, 0x10001, 86   ; another country (China) 
HKR, Countries, Country5, 0x10001, 44   ; another country (United King) 

[All_Fax]
;HKR,  Fax, EnableV17Recv,, "1"
;HKR,  Fax, EnableV17Send,, "1"
;HKR,  Fax, HighestSendSpeed,, "0"
;HKR,  Fax, LowestSendSpeed,, "0"
;HKR,  Fax, ResetCommand,, "AT&FE0S0=0V1&C1&D2W1S95=0"
;HKR,  Fax, SetupCommand,, "AT&FE0Q0V1&C1&D2W1S0=0"
;HKR,  Fax, FixModemClass,, "1"
;HKR,  Fax, HardwareFlowControl,,  "1"
;HKR,  Fax, SerialSpeedInit,, "57600"
;HKR,  Fax, FixSerialSpeed,,"57600"
;HKR,  Fax, PreDialCommand,,""
;HKR,  Fax, PreAnswerCommand,,""
;HKR,  Fax, ExitCommand,,""

HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 1,, "ATE0Q0V1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 2,, "AT+FCLASS=1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 3,, "AT+FAE=1"
HKR, Fax\Class1\AdaptiveAnswer\AnswerCommand, 4,, "ATA"
HKR, Fax\Class1\AdaptiveAnswer, ModemResponseFaxDetect,, "FAX"
HKR, Fax\Class1\AdaptiveAnswer, ModemResponseFaxConnect,, "CONNECT"
HKR, Fax\Class1\AdaptiveAnswer, ModemResponseDataDetect,, "DATA"
HKR, Fax\Class1\AdaptiveAnswer, ModemResponseDataConnect,, "CONNECT"
HKR, Fax\Class1\AdaptiveAnswer, HostCommandDataDetect,, "ATO"
;HKR, Fax\Class1\AdaptiveAnswer, HostCommandFaxDetect,, "AT"
HKR, Fax\Class1\AdaptiveAnswer, SerialSpeedFaxDetect,, "57600"
HKR, Fax\Class1\AdaptiveAnswer, SerialSpeedDataDetect,, "57600"

;HKR, Fax\Class2\AdaptiveAnswer\AnswerCommand, 1,, "ATE0Q0V1"
;HKR, Fax\Class2\AdaptiveAnswer\AnswerCommand, 2,, "AT+FCLASS=1"
;HKR, Fax\Class2\AdaptiveAnswer\AnswerCommand, 3,, "AT+FAA=1"
;HKR, Fax\Class2\AdaptiveAnswer\AnswerCommand, 4,, "ATA"
;HKR, Fax\Class2\AdaptiveAnswer, ModemResponseFaxDetect,, "FAX"
;HKR, Fax\Class2\AdaptiveAnswer, ModemResponseFaxConnect,, "CONNECT"
;HKR, Fax\Class2\AdaptiveAnswer, ModemResponseDataDetect,, "DATA"
;HKR, Fax\Class2\AdaptiveAnswer, ModemResponseDataConnect,, "CONNECT"
;HKR, Fax\Class2\AdaptiveAnswer, HostCommandDataDetect,, "ATO"
;HKR, Fax\Class2\AdaptiveAnswer, HostCommandFaxDetect,, "AT"
;HKR, Fax\Class2\AdaptiveAnswer, SerialSpeedFaxDetect,, "57600"
;HKR, Fax\Class2\AdaptiveAnswer, SerialSpeedDataDetect,, "57600"

[ESS.Reg]
HKR,  Init, 2,, "AT &F E0 S0=0 E1 V1 &D2 &C1 <cr>";
;HKR,, Properties, 1, 00,01,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 37,03,00,00, 00,C2,01,00, 00,E1,00,00
HKR,, Properties, 1, 00,01,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 0F,00,00,00, 37,03,00,00, 00,C2,01,00, 00,E1,00,00
HKR,, InactivityScale, 1, 3c,00,00,00;3c
HKR, Init, 1,, "AT<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Answer, 1,, "ATA<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "+IFC=0,0;"
HKR, Settings, FlowControl_Hard,, "+IFC=2,2;"
HKR, Settings, FlowControl_Soft,, "+IFC=1,1;"
HKR, Settings, ErrorControl_On,, "+ES=3,0,2;"
HKR, Settings, ErrorControl_Off,, "+ES=1,0,1;"
HKR, Settings, ErrorControl_Forced,, "+ES=3,3,5;"
HKR, Settings, Compression_On,, "+DS=3;"  ;V42bis+MNP5
HKR, Settings, Compression_Off,, "+DS=0;"
HKR, Settings, Modulation_CCITT,, "B0"

HKR, Settings, Modulation_Bell,, "B1"
HKR, Settings, SpeedNegotiation_Off,, "N0"
HKR, Settings, SpeedNegotiation_On,, "N1"
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
HKR, Settings, Blind_Off,, "X4"
HKR, Settings, Blind_On,, "X3"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,, "S30=<#>"

[Country.Reg]
;****************************02-Germany**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\02,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3C,00,3C,00,3C,00,3C,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,32,00,32,00,\			; PULSTotal[4],8 bytes
BC,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************05-Austria**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\05,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3C,00,3C,00,3C,00,3C,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
EE,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************06-Italy**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\06,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3C,00,3C,00,3C,00,3C,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
F8,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************09-Denmark**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\09,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3D,00,43,00,3D,00,43,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,32,00,32,00,\			; PULSTotal[4],8 bytes
F4,01,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************21-Spain**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\21,DialParameter,1,\;DialParm DIALP,total 22 Bytes
43,00,43,00,43,00,43,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
EE,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************23-Belgium**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\23,DialParameter,1,\;DialParm DIALP,total 22 Bytes
42,00,42,00,42,00,42,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
BC,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************25-Greece**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\25,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3D,00,3D,00,3D,00,3D,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
D0,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************27-Netherlands**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\27,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3D,00,3D,00,3D,00,3D,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
EE,02,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************31-Portugal**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\31,DialParameter,1,\;DialParm DIALP,total 22 Bytes
42,00,42,00,42,00,42,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
EE,02,\						; PLUSEPause,2 Bytes
50,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************33-Switzerland**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\33,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3C,00,3C,00,3C,00,3C,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,64,00,64,00,\			; PULSTotal[4],8 bytes
6C,02,\						; PLUSEPause,2 Bytes
41,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

;****************************42-Ireland**************************
HKLM,SYSTEM\CurrentControlSet\Services\Edspport\Parameters\EdspPort1\Country\42,DialParameter,1,\;DialParm DIALP,total 22 Bytes
3D,00,43,00,3D,00,43,00,\			; PULSEbreak[4],8 Bytes
64,00,64,00,32,00,32,00,\			; PULSTotal[4],8 bytes
F4,01,\						; PLUSEPause,2 Bytes
46,00,\						; DTMFPause,2 Bytes
00,00						; PulseDialEnable,2 Bytes

[responses]
;HKR, Responses, "<cr>",        1, 01, 00, 00,00,00,00, 00,00,00,00
;HKR, Responses, "<lf>",        1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>",     1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",   1, 07, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "0<cr>",       1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK
HKR, Responses, "1<cr>",       1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT
HKR, Responses, "2<cr>",       1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING
HKR, Responses, "3<cr>",       1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
HKR, Responses, "4<cr>",       1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR
HKR, Responses, "5<cr>",       1, 02, 00, b0,04,00,00, 00,00,00,00 ; CONNECT 1200
HKR, Responses, "6<cr>",       1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE
HKR, Responses, "7<cr>",       1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY
HKR, Responses, "8<cr>",       1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER

HKR, Responses, "<cr><lf>FAX<cr><lf>",         1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DATA<cr><lf>",        1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RINGING<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>DELAYED<cr><lf>",     1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BLACKLISTED<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+FCERROR<cr><lf>",    1, 03, 00, 00,00,00,00, 00,00,00,00


;RESPONSE
HKR, Responses, "<cr><lf>CONNECT 300<cr><lf>",     1, 02, 00, 2C,01,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 600<cr><lf>",     1, 02, 00, 58,02,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 1200<cr><lf>",    1, 02, 00, B0,04,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 75/1200<cr><lf>",    1, 02, 00, B0,04,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 1200/75<cr><lf>",    1, 02, 00, B0,04,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>",    1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>",    1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 7200<cr><lf>",    1, 02, 00, 20,1C,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>",    1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 12000<cr><lf>",   1, 02, 00, E0,2E,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>",   1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 16800<cr><lf>",   1, 02, 00, A0,41,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>",   1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 21600<cr><lf>",   1, 02, 00, 60,54,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 24000<cr><lf>",   1, 02, 00, C0,5D,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 26400<cr><lf>",   1, 02, 00, 20,67,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800<cr><lf>",   1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 31200<cr><lf>",   1, 02, 00, e0,79,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 33600<cr><lf>",   1, 02, 00, 40,83,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>",   1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>",   1, 02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>",  1, 02, 00, 00,C2,01,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 230400<cr><lf>",  1, 02, 00, 00,84,03,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 460800<cr><lf>",  1, 02, 00, 00,08,07,00, 00,00,00,00

HKR, Responses, "<cr><lf>+DR:CLASS 5<cr><lf>",  1, 01, 01, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+DR:V42B<cr><lf>",     1, 01, 01, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+DR:NONE<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+ER:NONE<cr><lf>", 	1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+ER:LAPM<cr><lf>",     1, 01, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+ER:ALT<cr><lf>",      1, 01, 02, 00,00,00,00, 00,00,00,00

;for 56K
HKR,Responses,  "<cr><lf>CONNECT 57333<cr><lf>",        1,2,0,F5,DF,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 56000<cr><lf>",        1,2,0,C0,DA,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 54666<cr><lf>",        1,2,0,8A,D5,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 53333<cr><lf>",        1,2,0,55,D0,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 52000<cr><lf>",        1,2,0,20,CB,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 50666<cr><lf>",        1,2,0,EA,C5,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 49333<cr><lf>",        1,2,0,B5,C0,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 48000<cr><lf>",        1,2,0,80,BB,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 46666<cr><lf>",        1,2,0,4A,B6,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 45333<cr><lf>",        1,2,0,15,B1,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 44000<cr><lf>",        1,2,0,E0,AB,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 42666<cr><lf>",        1,2,0,AA,A6,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 41333<cr><lf>",        1,2,0,75,A1,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 40000<cr><lf>",        1,2,0,40,9C,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 38666<cr><lf>",        1,2,0,0A,97,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 37333<cr><lf>",        1,2,0,D5,91,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 36000<cr><lf>",        1,2,0,A0,8C,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 34666<cr><lf>",        1,2,0,6A,87,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 33333<cr><lf>",        1,2,0,35,82,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 32000<cr><lf>",        1,2,0,00,7D,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 30666<cr><lf>",        1,2,0,CA,77,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 29333<cr><lf>",        1,2,0,95,72,00,0,0,0,0,0
HKR,Responses,  "<cr><lf>CONNECT 28000<cr><lf>",        1,2,0,60,6d,00,0,0,0,0,0

;Modulation in effect,currently not use
HKR, Responses, "<cr><lf>+MCR: V90<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
;HKR, Responses, "<cr><lf>+MCR: K56<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V34<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V32B<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V32<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V22B<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V22<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V23<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V21<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: B103<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V17<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V17_Short<cr><lf>",1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V27<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V29<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: FAX<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V21_Ch2<cr><lf>",  1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: Voice<cr><lf>",    1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: Tone<cr><lf>",     1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: Cid<cr><lf>",      1, 01, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+MCR: V21_Ch1<cr><lf>",  1, 01, 00, 00,00,00,00, 00,00,00,00

[Strings]
ESS="ESS"
ESSMfgName="ESS Technology, Inc"
DiskName="ESS Windows 2000 Modem Driver Installation Disk"
ES56CVMPI="ESS ES56CVM-PI Data Fax Voice Modem"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 0.95