************************************************************
*
* Intel(R) 81x Chipset Family Graphics Driver and
* Graphics Controller for Intel (R) Celeron (TM) Processor
* for Microsoft* Windows* 95 and Microsoft* Windows* 98
* Installation Information
*
* Date: March 3, 2000
*
* NOTE: This document refers to systems containing the
* following Intel chipset:
*
* Intel(R) 810 Chipset
* Intel(R) 810E Chipset
* Intel(R) 815 Chipset
* Intel(R) 815E Chipset
* Graphics Controller for Intel (R) Celeron (TM) Processor
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section at the bottom
* of this document, and contact your Intel field
* representative if you would like more information.
*
************************************************************
************************************************************
* DISCLAIMER: Intel is making no claims of usability,
* efficacy or warranty. The INTEL SOFTWARE LICENSE AGREEMENT
* contained herein completely defines the license and use of
* this software.
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. System Requirements
2. Localized Language Abbreviations
3. Installing the Software
4. Verifying Installation of the Software
5. Identifying the Software Version Number
6. Uninstalling the Software
7. Installation Switches Available
************************************************************
* 1. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
chipsets:
Intel(R) 810 Chipset
Intel(R) 810E Chipset
Intel(R) 815 Chipset
Intel(R) 815E Chipset
Graphics Controller for Intel (R) Celeron (TM) Processor
2. It is recommended that the kit software is installed on
systems with at least 32MB of system memory.
3. It is recommended that there is sufficient hard disk
space in the <TEMP> directory (typically
C:\WINDOWS\TEMP) on the system to install this software.
The Microsoft Windows 95 INF files included with this distribution
package are designed to function with the following
versions of Microsoft Windows 95:
Microsoft Windows 95 4.00.950B (OSR2.1 with USB Supplement)
Microsoft Windows 95 4.00.950C (OSR2.5 with or without USB
Supplement)
The Microsoft Windows 98 INF files included with this
distribution package are designed to function with the
following version of Microsoft Windows 98:
Microsoft Windows 98 4.10.1998
Please check with your system provider to determine which
operating system and Intel chipset are used in your system.
************************************************************
* 2. Localized Language Abbreviations
************************************************************
The following list is the abbreviations of all languages that
the driver has been localized in. You may have to reference
this section while using this document.
chs -> Mainland Chinese
cht -> Traditional Chinese
dan -> Danish
deu -> German
eng -> International English
enu -> English
esp -> Spanish
fin -> Finnish
fra -> French
frc -> French Canadian
ita -> Italian
jpn -> Japanese
kor -> Korean
nld -> Dutch
nor -> Norwegian
plk -> Polish
ptb -> Brazilian Portuguese
ptg -> Portuguese
rus -> Russian
sve -> Swedish
tha -> Thai
************************************************************
* 3. INSTALLING AND EXECUTING THE SOFTWARE
************************************************************
General Installation Notes:
1. The operating system must be installed on the system prior
to installation.
2. This installation procedure is specific only to the
version of driver and installation file included in this
release.
3. This procedure assumes that all of the software
associated with this release is located in the same
directory.
1.1 UNINSTALLATION OF PREVIOUSLY LOADED DRIVER
1. If a previous version on an Intel Graphics Display Adapter
was installed, remove this driver before proceeding with the
installation procedures.
2. Please refer to Section 6. UNINSTALLING THE SOFTWARE for
the uninstallation instructions.
1.2 INSTALLSHIELD (AUTOMATED) INSTALL FROM HARD DRIVE
1. Double-click SETUP.EXE.
2. Click "Next" at the Welcome screen.
3. Read the license agreement and click "Yes" to continue.
4. This screen indicates the directory where the End User
Diagnostic Utility files will be stored. NOTE: the graphics
driver is not installed here. If you wish to change the
directory, click "Browse" and change the directory. Click
"Next" to continue.
5. The driver files will now be installed. When finished
installing, choose the "Yes" to reboot option and click "Finish"
to restart your computer. The driver should now be loaded. To
determine if the driver has been loaded correctly, refer to the
"Verifying Installation" section, below.
************************************************************
* 4. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1. From the desktop, click on "My Computer", then "Control
Panel", and finally, "System".
2. You should be in the "System Properties" window. Click
on the "Device Manager" tab. From here, go down to "Display
Adapter" and click. To check the version of the driver, refer
to the section below.
************************************************************
* 5. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
1. Select "My Computer" icon, "Control Panel" icon, and
then the "Display" icon.
2. You should now be in the "Display Properties" window.
Select the "Settings" tab and click the "Advanced" button.
3. Select the "Version" tab. The entry for the "Display
Driver Version" should read the appropriate version number.
If this is not the case, then a different driver is being
used.
************************************************************
* 6. UNINSTALLING THE SOFTWARE
************************************************************
NOTE: This procedure assumes the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation file
included in this package.
1. From the desktop, click on "My Computer", then "Control
Panel", and then, finally, "Display".
2. You should be in the "Display Properties" window. Click
on the "Settings" tab. Next click the "Advanced" button.
3. Select the "Adapter" tab. The driver information will
appear, click on the "Change" button.
4. The "Update Device Driver Wizard" window should open.
Click "Next".
5. At the next window select the option for "Display a
list" and click the "Next" button. Next click on "Show all
hardware"
6. In the split screen window under "Manufacturers:" select
"(Standard display types)". In the other half of the split
window select "Standard PCI Graphics Adapter (VGA)", then
click on the "Next" button.
7. At the next screen hit "Next". If needed, direct
Windows to the location of your Microsoft Windows 95 or
Microsoft Windows 98 installation CD-ROM. The VGA driver
should be loaded. Click on "Finish" and re-boot the system
as directed in order for the changes to take effect.
8. To verify that the VGA driver was installed correctly,
refer to section 4.
************************************************************
* 7. INSTALLATION SWITCHES AVAILABLE
************************************************************
The switches in the SETUP.EXE file will have the following
syntax. Switches are not case sensitive and may be
specified in any order (except for the -s switch). Switches
must be separated by spaces.
SETUP [-b] [-no{pp}] [-basic] [-g{xx[x]}] [-nomsg]
[-16x640x480][-nolic] [-s]
-b Forces a system reboot after the installation
completes.
-no{pp} Disables the specified Intel-designed property
pages.
{pp} is one of the following:
{pp} Description
clr Removes the color property page from the Display
Properties sheet
tvout Removes the TV-Out property page from the Display
Properties sheet
fp Removes the Flat Panel property page from the
Display Properties sheet
ver Removes the Version property page from the Display
Properties sheet
display Removes the Display property page from the Display
Properties sheet
diag Removes the end-user diagnostic button found on
the Version tab
-basic Removes all Intel-designed property pages/features
from the Display Properties sheet. This switch
overrides all -no{pp} switch settings.
-g{xx[x]} Forces the installation to install a
particular language version of the driver.
The messages displayed to the user are also
displayed in the language specified. If
the language version of the operating system
on which the installation is being run
doesn’t support the specified language,
the displayed messages may be garbage text.
{xx[x]} is one of the following:
{xx[x]} Language
CHS or CH Chinese (Simplified)
CHT or TW Chinese (Traditional)
DAN or DK Danish
DEU or GR German
ENG English (UK)
ENU or US English (US)
ESM Spanish (Mexican)
ESN or SP Spanish (Modern)
ESP Spanish (Traditional)
FIN or FI Finnish
FRA or FR French (Standard)
FRC French (Canadian)
ITA or IT Italian
JPN or JP Japanese
KOR or KR Korean
NLD or NL Dutch
NOR or NO Norwegian (Bokmal)
PLK or PL Polish
PTB or BR Portuguese (Brazilian)
PTG or PT Portuguese
RUS or RU Russian
SVE or SE Swedish
THA or TH Thai
-nomsg Suppresses the displaying of non-critical messages.
During the file-copy process when installing the
driver (not the EUD), the installation program may
come across earlier or later versions of system
files. The install will never replace newer versions
of these files. It may replace older versions of files.
If the older file is not read-only, it will be replaced.
When the older file is read-only, this switch instructs
the install to not prompt the user for confirmation to
over write the older file. In this case it will always
overwrite the older file. If the switch is not specified,
the user will be prompted to confirm overwriting the
older file. This flag has no affect on the installation
of system files required by the EUD.
-nolic Suppresses the display of the license agreement screen.
--<color depth>x<horizontal resolution>x<vertical resolution>x
<refresh rate>
Sets the default display mode. If no display mode switch
is specified, the display mode will be set to 16x800x600.
Example: -8x640x480x70 will set the color palette to 256
colors (8-bit color depth), the desktop resolution to
640x480, and the refresh frequency to 70 hertz. If no
display mode switch is specified, the display mode will
be set to 16x800x600x60.
-s Run in blind mode. In blind mode all visual indication
that the installation is taking place is disabled. In
blind mode the installation requires no user interaction
and all selections which normally require user input will
use the default selections. This switch must be the last
switch specified on the command line.
Specifying Default Switches
Default switches may be specified by modifying the
SETUP.INI and INSTALL.CFG files. When the install
program is invoked it first reads the SETUP.INI file to
see if the blind mode switch is specified. If it is, the
install program will always run in blind mode regardless
of what switches are specified in the INSTALL.CFG file
and on the invocation command line. After reading the
SETUP.INI file it checks to see if other switches apply.
If switches were specified on the command line, it
ignores any switches specified in the INSTALL.CFG file
and uses only those specified on the command line. If
no switches were specified on the command line, it reads
the INSTALL.CFG file and uses switches specified in that
file.
SETUP.INI Switches
The only switch that may be specified in the SETUP.INI
file is the blind mode switch (-s). No other switches may
be specified in this file. All other switches should be
specified in the INSTALL.CFG file. The blind mode switch
is added to the CmdLine line of the [Startup] section as
follows:
[Startup]
CmdLine=-s
INSTALL.CFG Switches
All switches except for the blind mode switch (-s) may be specified
in the INSTALL.CFG file. They should be added to the
CmdLine line in the [Configuration] section following the
format specified in the Command Line Syntax section above.
An example INSTALL.CFG file is should below:
[Configuration]
CmdLine=-16x640x480 -b -notvout
Example Invocation Syntax
SETUP -s
SETUP -b
SETUP -gus -b -s
SETUP -gGR
SETUP -basic -gNOR
SETUP -notvout -s
SETUP -16x640x480 -b -s
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
* (OEM/IHV/ISV Distribution & Single User)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
Please Also Note:
* If you are an Original Equipment Manufacturer (OEM),
Independent Hardware Vendor (IHV), or Independent
Software Vendor (ISV) this complete LICENSE AGREEMENT
applies;
* If you are an End-User, then only Exhibit A, the INTEL
SOFTWARE LICENSE AGREEMENT, applies.
---------------------------------------------------------
For OEMs, IHVs, and ISVs:
LICENSE. This Software is licensed for use only in conjunction
with Intel component products. Use of the Software in
conjunction with non-Intel component products is not licensed
hereunder. Subject to the terms of this Agreement, Intel
grants to You a nonexclusive, nontransferable, worldwide,
fully paid-up license under Intel's copyrights to:
a) use, modify, and copy Software internally for Your own
development and maintenance purposes; and
b) modify, copy and distribute Software, including derivative
works of the Software, to Your end-users, but only
under a license agreement with terms at least as
restrictive as those contained in Intel's Final,
Single-User License Agreement, attached as Exhibit A;
and
c) modify, copy and distribute the end-user documentation
that may accompany the Software, but only in
association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation), to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicense, lease or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.
Except as expressly stated in this Agreement, no license or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect
Your relevant records to verify Your compliance with the
terms and conditions of this Agreement.
CONFIDENTIALITY. If You wish to have a third-party
consultant or subcontractor ("Contractor") perform work on
Your behalf that involves access to or use of Software,
You shall obtain a written confidentiality agreement from
the Contractor that contains terms and obligations with
respect to access to or use of Software no less restrictive
than those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements or other announcements without Intel's
prior written consent. You do not have any rights to use
any Intel trademarks or logos.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and by international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety(90)
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items
contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
---------------------------------------------------------
EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
LICENSE. You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction
with Intel component products. Use of the Software in
conjunction with non-Intel components is not licensed
hereunder.
2. You may not copy, modify, rent, sell, distribute or
transfer any part of the Software except as provided in
this Agreement, and you agree to prevent unauthorized
copying of the Software.
3. You may not reverse-engineer, decompile or disassemble
the Software.
4. You may not sublicense or permit simultaneous use of the
Software by more than one user.
5. The Software may contain the software or other property
of third-party suppliers, some of which may be identified
in, and licensed in accordance with, any enclosed
"license.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but
is not obligated to support or update the Software. Except
as otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety(90)
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or their
successors. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
SLAOEMISV1/RBK/January 21, 2000
************************************************************
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life-sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) Intel Corporation, 1998-2000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.