README.TXT Driver File Contents (stb-wn95.exe)

Instructions for Installing an Avance Logic Video Card in Conjunction with Windows 95

Case1: 	Windows 95 is not installed on the system and an Avance Logic video 
card is Installed on the system motherboard.

	1.  Install Windows '95 by following the manufacturer's installation 
            procedure.

	2.  Double click on the My Computer icon when the installation is 
            complete to bring up the My Computer window.

	3.  Double click on the Control Panel icon to bring up the Control 
            Panel window.

	4.  Double click on the Display icon to bring up the Display 
            Properties window.

	5.  Click on the Settings tab to bring the Settings page of the 
            Display Properties window to the front.

	6.  Click on the [Change Display Type] button to bring up the Change 
            Display Type window.

	7.  Click on the [Change .....] button in the Adapter Type section of 
            this window to bring up the Selection Device window.

	8.  Click on the [Have Disk] button to bring up th Install From Disk 
            window. Follow the instructions in this window for inserting the 
            diskette containing the driver into the selected diskette driver and 
            then click on the [OK] button to bring up another Select Device 
            window.

	9.  Insure that "Avance Logic 2301 PCI" is highlighed in the Select 
            Device window and then click on the [OK] button. The Copying Files 
            information box will come up indicating that files are being copied 
            to the hard disk driver. When the copying is complete, the Change 
            Display Type window will return.

	10. Click on the [Change.....] button in the Monitor Type selection 
            of the Change Display Type window and follow the instructions for 
            selecting the appropriate monitor type.

	11. Click on [Close] button in the Change Display Type window to 
            bring back the Display Properties window.

	12. Select the desired resolution, color, and font size values in the 
            Display Properties window and then click on the [Apply] button to 
            bring back the System Settings Change window.

	13. Click on the [Yes] button in the System Settings Change window to 
            restart the system and activate the new settings.

Case 2: Windows 95 is installed on the system and a video card other than an 
Avance Logic video card is installed on the system motherboard.


	Note: It is recommend that the video mode be set to Standard VGA 
              before beginning this installation.

	1.  Power of the system, remove the existing video card, and install 
            the Avance Logic video card.

	2.  Power on the system. The New Hardware Found window will be 
            displayed. In this window, select "Driver from disk provided by 
            hardware Manufacturer." and then click on the [OK] button to bring up 
            the Install From Disk window.

	3.  Follow the instructions in the Install From Disk window for 
            inserting the diskette containing the driver into the selected 
            diskette drive and then click on the [OK] button to bring up Select 
            Device window.

	4.  Insure that "Avance Logic 2301 PCI" is highlighted in the Select 
            Device window and then click on the [OK] button. The Copyiong Files 
            message box will come up indicating that files are being copied to 
            the hard disk drive. When the copying is complete, the Change Display 
            Type window will comp up.

	5.  Click on the [Change .....] button in the monitor Type selection 
            of the Change Display Type window and follow the instruction for 
            selecting the appropriate monitor type. This step may be skipped if 
            the correct monitor type was selected previously.

	6.  Click on the [Close] button in the Change Display Type window to 
            bring up the Display Properties window.

	7.  Select the desired resolution, color, and font size values in 
            Display Properties window and then click on the [Apply button to 
            bring back the System Settings Change window.

	8.  Click on the [Yes] button in the System Settings Change window to 
            restart the system and activate the new settings.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.61