OEMSETUP.INF Driver File Contents (PCCA00H.EXE)

[Identification]
    OptionType = SCSI

[LanguagesSupported]
    ENG

[Options]
    "ADAPTEC" = 18NT40

[OptionsTextENG]
    "ADAPTEC" = "Adaptec APA-1480 CardBus SCSI Controller (NT 4.0)"

[MiniportDrivers]
    18NT40    = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL,  1, %SystemRoot%\System32\IoLogMsg.dll , 7

[AdaptecInstall]
        ; <ID>  = REGISTRY_KEY
        18NT40  = apa1480s

;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION:   To verify that this INF deals with the same type of options
;                as we are choosing currently.
;
; INPUT:         None
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL
;                $($R1): Option Type (COMPUTER ...)
;                $($R2): Diskette description
;---------------------------------------------------------------------------

[Identify]
    ;
    ;
    read-syms Identification

    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)



;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION:   To return the option list supported by this INF and the
;                localised text list representing the options.
;
;
; INPUT:         $($0):  Language used. ( ENG | FRN | ... )
;
; OUTPUT:        $($R0): STATUS: STATUS_SUCCESSFUL |
;                                STATUS_NOLANGUAGE
;                                STATUS_FAILED
;
;                $($R1): Option List
;                $($R2): Option Text List
;------------------------------------------------------------------------

[ReturnOptions]
    ;
    ;
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

    ;
    ; form a list of all the options and another of the text representing
    ;

returnoptions = +
    set OptionList     = ^(Options, 0)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)


;
; 3. InstallOption:
;
; FUNCTION:  To copy files representing Options
;            To configure the installed option
;            To update the registry for the installed option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;            $($2):  SourceDirectory
;            $($3):  AddCopy  (YES | NO)
;            $($4):  DoCopy   (YES | NO)
;            $($5):  DoConfig (YES | NO)
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;

[InstallOption]

    ;
    ; Set default values for
    ;
    set Status = STATUS_FAILED
    set DrivesToFree = {}

    ;
    ; extract parameters
    ;
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

        ;
        ; Get Adaptec Symbols
        ;
        read-syms AdaptecInstall

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_InstallOption
    endif
    read-syms Strings$($0)

    ;
    ; check to see if Option is supported.
    ;

    set OptionList = ^(Options, 0)
    ifcontains $(Option) in $(OptionList)
    else
        Debug-Output "SCSI.INF: SCSI option is not supported."
        goto finish_InstallOption
    endif
    set OptionList = ""

    ;
    ; Option has been defined already
    ;

    set MiniportDriver   =   #(Options,         $(Option),         1)
    set Type             = $(#(MiniportDrivers, $(MiniportDriver), 1))
    set Group            =   #(MiniportDrivers, $(MiniportDriver), 2)
    set ErrorControl     = $(#(MiniportDrivers, $(MiniportDriver), 3))
    set Tag              =   #(MiniportDrivers, $(MiniportDriver), 4)
    set EventMessageFile =   #(MiniportDrivers, $(MiniportDriver), 5)
    set TypesSupported   =   #(MiniportDrivers, $(MiniportDriver), 6)

    ;; nishi 9/2/97
    ;; set Start            =   $(!SERVICE_BOOT_START)
     set Start            =   $(!SERVICE_SYSTEM_START)
    ;; nishi

installtheoption = +

    ;
    ; Code to add files to copy list
    ;

    ifstr(i) $(AddCopy) == "YES"
        set DoActualCopy = NO
        set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
        LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
        ifstr(i) $(STATUS) == NO
            set DoActualCopy = YES
        endif

        ifstr(i) $(DoActualCopy) == NO
            shell "subroutn.inf" DriversExist $($0) $(String1)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output "SCSI.INF: shelling DriversExist failed"
                goto finish_InstallOption
            endif

            ifstr(i) $($R0) == STATUS_CURRENT
            else-ifstr(i) $($R0) == STATUS_NEW
                set DoActualCopy = YES
            else-ifstr(i) $($R0) == STATUS_USERCANCEL
                Debug-Output "SCSI.INF: User cancelled SCSI installation"
                goto finish_InstallOption
            else
                Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF"
                goto finish_InstallOption
            endif
        endif

        ifstr(i) $(DoActualCopy) == YES

;                       ifstr(i) $(SrcDir) == "a:\"
                    shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "SCSI.INF: shelling DoAskSourceEx failed"
                        goto finish_InstallOption
                    endif

                    ifstr(i) $($R0) == STATUS_SUCCESSFUL
                        set SrcDir = $($R1)
                        ifstr(i) $($R2) != ""
                            set DrivesToFree = >($(DrivesToFree), $($R2))
                        endif
                    else
                        Debug-Output "SCSI.INF: User cancelled asking source."
                        goto finish_InstallOption
                    endif
;                       endif

            install Install-AddCopyOption

            ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
                Debug-Output "Adding SCSI files to copy list failed"
                goto finish_InstallOption
            endif

        else
            set DoCopy = NO
        endif

    endif

    ifstr(i) $(DoCopy) == "YES"
        read-syms ProgressCopy$($0)
        install Install-DoCopyOption
        ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
            Debug-Output "Copying files failed"
            goto finish_InstallOption
        else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
            set Status = STATUS_USERCANCEL
            goto finish_InstallOption
        endif
    endif

    ifstr(i) $(DoConfig) == "YES"
        ;
        ; first run a privilege check on modifying the setup node
        ;

        shell "registry.inf" CheckSetupModify
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto finish_InstallOption
        endif

        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            goto finish_InstallOption
        endif

        ;
        ; then make a new SCSI entry, the entry is created automatically
        ; enabled
        ;

        set ServiceNode   = #(AdaptecInstall, $(MiniportDriver), 1)
        set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)

        set ServicesValues   = { +
                {Type,           0, $(!REG_VT_DWORD),     $(Type)                  }, +
                {Start,          0, $(!REG_VT_DWORD),     $(Start)                 }, +
                {Group,          0, $(!REG_VT_SZ),        $(Group)                 }, +
                {ErrorControl,   0, $(!REG_VT_DWORD),     $(ErrorControl)          }, +
                {Tag,            0, $(!REG_VT_DWORD),     $(Tag)                   }, +
                {BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary)         }  +
                }
;; nishi
        set ParametersValues = ""
;;        set ParametersValues = "Parameters"
;;nishi
        set DeviceValues     = {}
        set EventLogValues   = { +
                {EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
                {TypesSupported,   0, $(!REG_VT_DWORD),     $(TypesSupported)   }  +
                }

        shell "registry.inf"  MakeServicesEntry $(ServiceNode)      +
                                                $(ServicesValues)   +
                                                $(ParametersValues) +
                                                $(DeviceValues)     +
                                                $(EventLogValues)   +
                                                Parameters



        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
            goto finish_InstallOption
        endif

        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            Debug-Output "MakeServicesEntry failed for SCSI"
            goto finish_InstallOption
        endif

;; nishi
;; add code to add Parameters key and SoftexPcmcia value key here

        Debug-Output "nishi 1"
        set apa1480sKeyName = "System\CurrentControlSet\Services\apa1480s"
        OpenRegKey $(!REG_H_LOCAL) "" $(apa1480sKeyName) $(!REG_KEY_ALL_ACCESS) apa1480sKeyHandle
        ifstr(i) $(apa1480sKeyHandle) != ""
           Debug-Output "nishi 2"
           CreateRegKey $(apa1480sKeyHandle) {"Parameters",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" ParamKeyHandle
;; nishi change 8/12/97
           ifstr(i) $(ParamKeyHandle) == ""
                Debug-Output "nishi 5"
                OpenRegKey $(apa1480sKeyHandle) "" "Parameters" $(!REG_KEY_ALL_ACCESS) ParamKeyHandle
                ifstr(i) $(ParamKeyHandle) == ""
                    Debug-Output "nishi 6"
                    goto finish_InstallOption
                else
                    ;; nishi 10/31/97
                    ;; delete targetids and luns from parameters
                    EnumRegKey $(ParamKeyHandle) TargetIdInfo
                    set TargetIdList = {}
                    ForListDo $(TargetIdInfo)
                        ifstr(i) $(TargetIdList) == {}
                            set TargetIdList = {*($($),1)}
                        else
                            set TargetIdList = >($(TargetIdList),*($($),1))
                        endif
                    EndForListDo
                    ForListDo $(TargetIdList)
                        OpenRegKey $(ParamKeyHandle) "" $($) $(!REG_KEY_ALL_ACCESS)  TargetKeyHandle
                        ifstr(i) $(TargetKeyHandle) != ""
                            EnumRegKey $(TargetKeyHandle) LunInfo
                            set LunList = {}
                            ForListDo $(LunInfo)
                                ifstr(i) $(LunList) == {}
                                    set LunList = {*($($),1)}
                                else
                                    set LunList = >($(LunList),*($($),1))
                                endif
                            EndForListDo

                            ForListDo $(LunList)
                                DeleteRegkey $(TargetKeyHandle) $($)
                            EndForListDo
                        endif
                        CloseRegKey $(TargetKeyHandle)
                        DeleteRegKey $(ParamKeyHandle) $($)
                    EndForListDo
                    ;; nishi 10/31/97
                endif
           endif
;; nishi change 8/12/97

           SetRegValue $(ParamKeyHandle) {SoftexPcmcia,0,$(!REG_VT_DWORD),1}
           DeleteRegValue $(ParamKeyHandle) "SoftexDock"
           DeleteRegKey $(ParamKeyHandle) "Device"
           CloseRegKey $(ParamKeyHandle)
        else
           Debug-Output "nishi 3"
            goto finish_InstallOption
        endif
        Debug-Output "nishi 4"
        CloseRegKey $(apa1480sKeyHandle)

;; nishi


    endif

    set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
    ForListDo $(DrivesToFree)
        LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
    EndForListDo

    Return $(Status)


[Install-AddCopyOption]

    ;
    ; Add the files to the copy list
    ;
    AddSectionKeyFileToCopyList   Files-ScsiMiniportDrivers         +
                                  $(MiniportDriver)                 +
                                  $(SrcDir)                      +
                                  $(!STF_WINDOWSSYSPATH)\drivers

    exit


[Install-DoCopyOption]

    ;
    ; Copy files in the copy list
    ;
    CopyFilesInCopyList
    exit

;-------------------------------------------------------------------------
; 4. DeInstallOption:
;
; FUNCTION:  To remove files representing Option
;            To remove the registry entry corresponding to the Option
;
; INPUT:     $($0):  Language to use
;            $($1):  OptionID to install
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_NOLANGUAGE |
;                            STATUS_USERCANCEL |
;                            STATUS_FAILED
;-------------------------------------------------------------------------
[DeInstallOption]
    ;
    ; Set default values for
    ;
    set Status   = STATUS_FAILED
    ;
    ; extract parameters
    ;
    set Option   = $($1)

        ;
        ; Get Adaptec Symbols
        ;
        read-syms AdaptecInstall

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_DeInstallOption
    endif
    read-syms Strings$($0)

    ;
    ; check to see if Option is supported.
    ;

    set OptionList = ^(Options, 0)
    ifcontains $(Option) in $(OptionList)
    else
        goto finish_DeInstallOption
    endif
    set OptionList = ""

    ;
    ; fetch details about option
    ;

    set MiniportDriver = #(Options, $(Option), 1)
    set MiniportFile   = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
    set FilePath       = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)

    ;
    ; check to see if file is installed
    ; if not give success
    ;

    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
    ifstr(i) $(STATUS) == "NO"
        set Status = STATUS_SUCCESSFUL
        goto finish_DeInstallOption
    endif

    set ServiceNode = #(AdaptecInstall, $(MiniportDriver), 1)
    shell "registry.inf" GetServicesEntryStart $(ServiceNode)
    ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
        ; this could happen if there is no start value or there is no
        ; key, in which case the option is not installed
        set Status = STATUS_SUCCESSFUL
        goto finish_DeInstallOption
    endif

    ifstr(i) $($R1) == $(!SERVICE_BOOT_START)
        shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3)
        ifstr(i) $($R0) != STATUS_SUCCESSFUL
            goto do_removal
        endif
        ifstr(i) $($R1) == "CANCEL"
            goto finish_DeInstallOption
        endif
    endif

do_removal =+
    ;
    ; disable the registry entry
    ;

    shell "registry.inf" RemoveServicesEntry $(ServiceNode)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry"
        goto finish_DeInstallOption
    endif

    ifstr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output "SCSI.INF: Failed to disable services entry"
        goto finish_DeInstallOption
    endif

    ;
    ; we won't remove the file because we can only do so during the next boot.
    ; if the user chooses to reinstall the same driver during this boot
    ; he will still end up deleting the driver on next boot. if the file
    ; should be deleted a warning should be put up saying that the user should
    ; not try to reinstall the driver during this boot
    ;
    ;    AddFileToDeleteList $(FilePath)

    set Status = STATUS_SUCCESSFUL

finish_DeInstallOption =+
    return $(Status)


;-------------------------------------------------------------------------
; 5. GetInstalledOptions:
;
; FUNCTION:  To find out the list of options which are installed
;
; INPUT:     $($0): Language to Use
;
; OUTPUT:    $($R0): STATUS: STATUS_SUCCESSFUL |
;                            STATUS_FAILED
;
;            $($R1): List of options installed
;            $($R2): Option installed Text List
;-------------------------------------------------------------------------
[GetInstalledOptions]
    set Status = STATUS_FAILED
    set InstalledOptions = {}
    set InstalledOptionsText = {}

    ;
    ; Check if the language requested is supported
    ;
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_GetInstalledOptions
    endif

    set OptionList = ^(Options, 0)
    ForListDo $(OptionList)
        set MiniportDriver = #(Options, $($), 1)
        set MiniportFile   = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
        set FilePath       = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
        LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
        ifstr(i) $(STATUS) == "YES"
            shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
            ifint $($ShellCode) == $(!SHELL_CODE_OK)
                ifstr(i) $($R0) == STATUS_SUCCESSFUL
                    ifstr(i) $($R1) != $(!SERVICE_DISABLED)

                        set OptionText = #(OptionsText$($0), $($), 1)
                        set InstalledOptions     = >($(InstalledOptions), $($))
                        set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText))

                    endif
                endif
            endif
        endif
    EndForListDo
    set Status = STATUS_SUCCESSFUL
finish_GetInstalledOptions =+
    Return $(Status) $(InstalledOptions) $(InstalledOptionsText)


;**************************************************************************
; PROGRESS GUAGE VARIABLES
;**************************************************************************

[ProgressCopyENG]
    ProCaption   = "Windows NT Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correcly installed.  Are you sure you want "+
                   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"

[StringsENG]
    String1 = "SCSI Adapter"
;; nishi

;;  String2 = "Please enter the full path to Adaptec's installation files."$(!LF)$(!LF)+
;;                        "These files are located in \WINNT\4_0 on the Adaptec SlimSCSI "+
;;                        " Manager Set diskette."

    String2 = "Please enter the full path to Adaptec's installation files."$(!LF)$(!LF)+
                          "These files are located in \apa1480 on "+
                          " Softex Pcmcia Installation diskette.2"
;; nishi

    String3 = "The SCSI Adapter has been marked as a boot device.  Removing "+
              "it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+
              "you want to remove the Adapter."

[Source Media Descriptions]
    1  = "Adaptec SlimSCSI Manager Set v1.00"

[Files-ScsiMiniportDrivers]
18NT40 = 1, apa1480s.sys, SIZE=39808
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.57