OEMSETUP.INF Driver File Contents (PCC_A04.ZIP)

;
; Usage:
;
;     This file is the installation/configuration/deinstallation
;     procedure of the DC21143 driver for Windows NT.  It can be
;     called from Windows Setup directly, or via the Windows NT
;     Networks Control Program Applet (NCPA) from inside the Windows
;     Control Panel.
;
;----------------------------------------------------------------------------------------
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
    PCI
[Options]
    DC21143
    DC21143Dock
    DC21143Pcmcia
[ConnectionChoicesDC21143]
    Connect_0 = "AutoSense", 0
    Connect_2 = "100 Mbps", 8
    Connect_3 = "100 Mbps Full_Duplex", 9
    Connect_6 = " 10 Mbps", 2
    Connect_7 = " 10 Mbps Full_Duplex", 3
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "StandardMicrosystemsCorporation"
ProductMajorVersion     = "4"
ProductMinorVersion     = "15"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

VendorID = 4113  ;; 1011 (DEC)

ProductSoftwareName     = "DC21143"
ProductSoftwareTitle    = "DC21143 Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\DC2114XS.sys"
NetRuleSoftwareType     = "DC21143Sys ndisDriver DC21143Driver"
NetRuleSoftwareUse        = $(SoftwareType)
NetRuleSoftwareBindForm = """DC21143Sys"" yes no container"
NetRuleSoftwareClass    = {"DC21143Driver basic"}
NetRuleSoftwareSWBindable = {"DC21143Driver DC21143Adapter non exclusive 100"}

ProductHardwareName     = "DC21143"
ProductHardwareDC21143Title   = "DC21143 PCI Fast Ethernet Adapter"
NetRuleHardwareDC21143Type    = "DC21143 DC21143Adapter"
NetRuleHardwareDC21143Class   = {"DC21143Adapter basic"}
AdapterDC21143Type = 5  ;; PCI board
HelpDC21143Id  = 50
DC21143CFID = 1642513     ;; 0x00191011

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from        = ""
to          = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull           = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct        = ""
KeyParameters   = ""
TRUE                = 1
FALSE             = 0
NoTitle                = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath        = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set !G:DebugOutputControl = 1
    set Media        = #("Source Media Descriptions", 1, 1)

    Debug-Output "<NISHI>identify section "
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status          = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    set !G:DebugOutputControl = 1
    Debug-Output "<NISHI> Return Option "

    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status           = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set !G:DebugOutputControl = 1
;Vivek
    set OptionLocal = $(Option)
    set Option      = DC21143
;Vivek
    Debug-Output "<NISHI> install Options "
    set LanguageList = ^(LanguagesSupported, 1)
    Debug-Output "<NISHI> language supported "
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        Debug-Output "<NISHI> NCPA "
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                 Debug-Output "<NISHI> ProductKeyName != NTN_RegBase "
                 Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                 ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     Debug-Output "<NISHI> ShellCode != SHELL_Code_OK "
                     goto ShellCodeError
                 endif
                 set Error = $($R0)
                 set from = end
                 set to = end
                 Debug-Output "<NISHI> goto nonfatalinfo "
                 goto nonfatalinfo
          else
                 set StartLabel = configureadapter
          endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
        Debug-Output "<NISHI> startlabel installadapter "
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    Debug-Output "<NISHI> in install adapter ProductKeyName"$(ProductKeyName)
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        Debug-Output "<NISHI> KeyProduct != KeyNull "
        CloseRegKey $(KeyProduct)
        ;NISHI 12/12/97
        ;ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Debug-Output "<NISHI> VerExistedDlg is called"
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
                 $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Debug-Output "<NISHI> ShellCode != SHELL_CODE_OK "
                 goto ShellCodeError
           endif
           Debug-Output "<NISHI> goto end "
           goto end
        ;else
        ;   Debug-Output "<NISHI> CardExistedDlg is called "
        ;   Shell $(UtilityInf), CardExistedDlg
        ;   ifint $($ShellCode) != $(!SHELL_CODE_OK)
        ;        Debug-Output "<NISHI> ShellCode != SHELL_CODE_OK "
        ;        goto ShellCodeError
        ;   endif
        ;   ifstr(i) $($R1) != "OK"
        ;         Debug-Output "<NISHI> $($R1) != OK"
        ;         set CommonStatus = STATUS_USERCANCEL
        ;         goto end
        ;   endif
        ;   Debug-Output "<NISHI> OldVersionExisted = TRUE "
        ;   set OldVersionExisted = $(TRUE)
        ;endif
        ; NISHI 12/12/97
    Endif
    Debug-Output "<NISHI> DoCopy begins here"
    ifstr(i) $(DoCopy) == "YES"
        Debug-Output "<NISHI> DoCopy is YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "<NISHI> ShellCodeError"
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Debug-Output "<NISHI> STATUS_FAILED"
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Debug-Output "<NISHI> ShellCodeError"
                 goto ShellCodeError
            endif
            set Error = $($R0)
                 Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                 Debug-Output "<NISHI> STATUS_USER_CANCEL"
                 Goto successful
        Endif
        Set SrcDir = $($R1)
        Debug-Output "<NISHI> install-hlp is called"
        install "Install-Hlp"
    endif
    Goto installproduct
configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
    Debug-Output "<NISHI> 1 "
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
             Debug-Output "<NISHI> 2 "
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "<NISHI> 3 "
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Debug-Output "<NISHI> 4 "
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        Debug-Output "<NISHI> 5 "
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
        ;Vivek
        else-ifstr(i) $(ValueName) == "AdapterName"
            set OldAdapterName = $(ValueData)
            Debug-Output "<NISHI> AdapterName in registry = "$(OldAdapterName)
        ;Vivek
        endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
        set from = adapteroptions
        read-syms FileDependentDlg$(!STF_LANGUAGE)
;Vivek
       ; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
;Vivek
        ui start "InputDlg"
        ifstr(i) $(DLGEVENT) == "CONTINUE"
           set ConnectionIndex = $(Combo1Out)
           ui pop 1
        else-ifstr(i) $(DLGEVENT) == "BACK"
           set CommonStatus = STATUS_USERCANCEL
           ui pop 1
           goto end
        else
           ui pop 1
           goto end
        endif
        set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
        ifstr(i) $(!NTN_InstallMode) == configure
           goto updateparameters
        endif
installproduct =+
    StartWait
        Debug-Output "<NISHI> 6 "
        set-div DeviceID = $($(Option)CFID) 65536
        Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
             Debug-Output "<NISHI> 7 "
             goto ShellCodeError
        endif
; nishi

;       ifstr(i) $($R0) == {}
;             set Error = $(CANNOT_FIND_ANY_CARD)
;             set CommonStatus = USER_CANCEL
;             set from = end
;             goto nonfatal
;        endif
; nishi
        set AdapterList = $($R0)
    ifint $(OldVersionExisted) == $(FALSE)
        Debug-Output "<NISHI> 8 "
        Ifstr(i) $(DoCopy) == "YES"
           Debug-Output "<NISHI> 9 "
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Debug-Output "<NISHI> 10 "
                 Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
                 Debug-Output "<NISHI> 11 "
                 Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                 ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     Debug-Output "<NISHI> 12 "
                     goto ShellCodeError
                 endif
                 set Error = $($R0)
                 Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                 Debug-Output "<NISHI> 13 "
                 Goto successful
           Endif
           Debug-Output "<NISHI> 14 "
           Set SrcDir = $($R1)
        Endif
        Debug-Output "<NISHI> 15 "
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Debug-Output "<NISHI> 16 "
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Debug-Output "<NISHI> 17 "
                 goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        Debug-Output "<NISHI> AddSoftwareComponent is called "

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "<NISHI> 18 "
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            Debug-Output "<NISHI> 19 "
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Debug-Output "<NISHI> 20 "
        Set SoftProductKey        = $($R1)
        Set SoftNetRuleKey        = $($R2)
        Set SoftServiceKey        = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey        = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "<NISHI> 21"
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            Debug-Output "<NISHI> 22 "
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "<NISHI> 23 "
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            Debug-Output "<NISHI> 24 "
            EndWait
            goto fatalregistry
        endif
    endif

;Vivek1
    ifstr $(OptionLocal) == "DC21143"
;Vivek2
     ForListDo $(AdapterList)
;Vivek1
    else
    endif
;Vivek2
        Debug-Output "<NISHI> 26 "
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)
            Debug-Output "<NISHI> 27 "
            Debug-Output "<NISHI> BusNum "$(BusNum)
            Debug-Output "<NISHI> DeviceNum "$(DeviceNum)
            Debug-Output "<NISHI> 27 Key1 "$(ProductHardware$(Option)Description)
            Debug-Output "<NISHI> 27 ProductHardwareName "$(ProductHardwareName)

                Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
; NISHI 12/12/97 Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
; NISHI 12/12/97       $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
                Debug-Output "<NISHI> 80 "
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    Debug-Output "<NISHI> 28 "
                    goto ShellCodeError
                endif
                ifstr $($R0) != "NO_ERROR"
                    Debug-Output "<NISHI> 29 "
                    set Error = $($R0)
                    goto fatal
                endif
                ; NISHI
                Debug-Output "<NISHI> R1 is "$($R1)
                ifstr(i) $($R1) != "YES"
                    Debug-Output "<NISHI> 30 "
                  ifstr(i) $(!STF_GUI_UNATTENDED) != "YES"
                    read-syms FileDependentDlg$(!STF_LANGUAGE)
       ;Vivek
                   ; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
       ;Vivek
                    ui start "InputDlg"
                    ifstr(i) $(DLGEVENT) == "CONTINUE"
                         Debug-Output "<NISHI> 32 "
                         set ConnectionIndex = $(Combo1Out)
                         ui pop 1
                    else-ifstr(i) $(DLGEVENT) == "BACK"
                         Debug-Output "<NISHI> 33 "
                         set CommonStatus = STATUS_USERCANCEL
                         ui pop 1
                         goto end
                    else
                         Debug-Output "<NISHI> 34 "
                         ui pop 1
                         goto end
                    endif
                  endif
                    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
                    ifint $($R4) != -1
                        Debug-Output "<NISHI> 35 "
                        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                    endif
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "<NISHI> 36 "
                        goto ShellCodeError
                    endif
                    set RegistryErrorIndex = $($R0)
                    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                         Debug-Output "<NISHI> 37 "
                         EndWait
                         CloseRegKey $($R1)
                         CloseRegKey $($R2)
                         CloseRegKey $($R3)
                         goto fatalregistry
                    endif
                    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
                    Set HardNetCardKey        = $($R1)
                    Set HardNetRuleKey        = $($R2)
                    Set HardParameterKey    = $($R3)
                    set AdapterNumber = $($R4)
                    Debug-Output "<NISHI> AddValueList is called "
                    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                        {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                        {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                         Debug-Output "<NISHI> 38 "
                         goto ShellCodeError
                    endif
                    set BusTypeNum = 5
;Vivek
                    ifstr $(OldAdapterName) == ""
                            Debug-Output "<NISHI> 39 "
                            Debug-Output "<NISHI> setting OldAdapterName"
                            set OldAdapterName = $(ProductHardwareName)$(AdapterNumber)
                    endif
                    Debug-Output "<NISHI> OldAdapterName = "$(OldAdapterName)

                    ifstr $(OptionLocal) == "DC21143"
                        set OnBoard = 1
                    endif

                    ifstr $(OptionLocal) == "DC21143Dock"
                        set OnDock = 1
                    endif

                    ifstr $(OptionLocal) == "DC21143Pcmcia"
                        set OnPcmcia = 1
                    endif
;Vivek
;; SANJAY

                   ifint $(OnBoard) == 1
                    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                        {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                        {SoftexDock,                  $(NoTitle),$(!REG_VT_DWORD),1},+
                                        {SoftexPcmcia,                  $(NoTitle),$(!REG_VT_DWORD),1},+
                                        {OnBoard,                  $(NoTitle),$(!REG_VT_DWORD),$(OnBoard)},+
                                        {OnDock,                  $(NoTitle),$(!REG_VT_DWORD),$(OnDock)},+
                                        {OnPcmcia,                  $(NoTitle),$(!REG_VT_DWORD),$(OnPcmcia)},+
                                        {StoreAndForward,                  $(NoTitle),$(!REG_VT_DWORD),1},+
                                        {InterruptNumber,                  $(NoTitle),$(!REG_VT_DWORD),0},+
                                        {IoBaseAddress,                  $(NoTitle),$(!REG_VT_DWORD),0},+
                                        {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
                                        {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}


                   else
			ifint $(OnDock) == 1 
			    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
						{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
						{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
						{SoftexDock,                  $(NoTitle),$(!REG_VT_DWORD),1},+
						{SoftexPcmcia,                  $(NoTitle),$(!REG_VT_DWORD),1},+
						{OnBoard,                  $(NoTitle),$(!REG_VT_DWORD),$(OnBoard)},+
						{OnDock,                  $(NoTitle),$(!REG_VT_DWORD),$(OnDock)},+
						{OnPcmcia,                  $(NoTitle),$(!REG_VT_DWORD),$(OnPcmcia)},+
						{StoreAndForward,                  $(NoTitle),$(!REG_VT_DWORD),1},+
						{InterruptNumber,                  $(NoTitle),$(!REG_VT_DWORD),0},+
						{IoBaseAddress,                  $(NoTitle),$(!REG_VT_DWORD),0},+
						{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
						{SoftexCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}
			else
			    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
						{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
						{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
						{CardbusBridgeLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+
						{CardbusBridgeCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+
						{CardbusCardLatencyTimer,$(NoTitle),$(!REG_VT_DWORD),32},+
						{CardbusCardCacheLineSize,$(NoTitle),$(!REG_VT_DWORD),8},+
						{CardbusBridgeWritePosting,$(NoTitle),$(!REG_VT_DWORD),1},+
						{SoftexDock,                  $(NoTitle),$(!REG_VT_DWORD),1},+
						{SoftexPcmcia,                  $(NoTitle),$(!REG_VT_DWORD),1},+
						{OnBoard,                  $(NoTitle),$(!REG_VT_DWORD),$(OnBoard)},+
						{OnDock,                  $(NoTitle),$(!REG_VT_DWORD),$(OnDock)},+
						{OnPcmcia,                  $(NoTitle),$(!REG_VT_DWORD),$(OnPcmcia)},+
						{StoreAndForward,                  $(NoTitle),$(!REG_VT_DWORD),1},+
						{InterruptNumber,                  $(NoTitle),$(!REG_VT_DWORD),0},+
						{IoBaseAddress,                  $(NoTitle),$(!REG_VT_DWORD),0},+
						{AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+
						{SoftexCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)}}

			endif
                   endif
;;nishi


                    Debug-Output "<NISHI> AddValueList with HardParameterKey is called"
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    Debug-Output "<NISHI> 4024 "
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        Debug-Output "<NISHI> 41 "
                        goto ShellCodeError
                    endif
                    ifint $($(Option)CFID) == $(DC21041CFID)
                        Debug-Output "<NISHI> 43 "
                        set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            Debug-Output "<NISHI> 44 "
                            goto ShellCodeError
                        endif
                        set NewValueList = {{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            Debug-Output "<NISHI> 45 "
                            goto ShellCodeError
                        endif
                    endif
                    ifint $($(Option)CFID) == $(DC21142CFID)
                        Debug-Output "<NISHI> 46 "
                        set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            Debug-Output "<NISHI> 47 "
                            goto ShellCodeError
                        endif
                        set NewValueList = {{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            Debug-Output "<NISHI> 48 "
                            goto ShellCodeError
                        endif
                    endif
                    ifint $($(Option)CFID) == $(DC21143CFID)
                        Debug-Output "<NISHI> 49 "
                        set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            Debug-Output "<NISHI> 50 "
                            goto ShellCodeError
                        endif
                    endif
                    ifint $($(Option)CFID) == $(DE450CFID)
                        set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            goto ShellCodeError
                        endif
                    endif
                    ifint $($(Option)CFID) == $(DC21140CFID)
                        set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForward)},+
                                            {TransmitThreshold100,$(NoTitle),$(!REG_VT_DWORD),$(TxmThreshold100)},+
                                            {SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            goto ShellCodeError
                        endif
                    endif
                    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    CloseRegKey $(HardNetCardKey)
                    CloseRegKey $(HardNetRuleKey)
                    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                        {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                        {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    CloseRegKey $(HardParameterKey)
                endif
;Vivek1
    ifstr $(OptionLocal) == "DC21143"
;Vivek2
      EndForListDo
;Vivek1
    else
    endif
;Vivek2

    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
        Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters)
    endif

    EndWait
    Debug-Output "<NISHI> 100 "
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Debug-Output "ShellCode error"
                 goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                 goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end
successful = +
            Debug-Output "<NISHI> 61 "
    goto end
abandon = +
            Debug-Output "<NISHI> 62 "
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
            Debug-Output "<NISHI> 60 "
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
            Debug-Output "<NISHI> 63 "
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
            Debug-Output "<NISHI> 64 "
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
            Debug-Output "<NISHI> 65 "
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
            Debug-Output "<NISHI> 66 "
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
            Debug-Output "<NISHI> 67 "
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
            Debug-Output "<NISHI> 68 "
    set DlgType        = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
            Debug-Output "<NISHI> 69 "
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
            Debug-Output "<NISHI> 70 "
    goto term
term = +
            Debug-Output "<NISHI> 71 "
    Return $(CommonStatus)
[Install-Option]
            Debug-Output "<NISHI> 72 "
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
         set !STF_NCPA_FLUSH_COPYLIST = TRUE
         CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    Exit
[Install-Update]
    set STF_VITAL          = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit
[Source Media Descriptions]
    1  = "Softex Disk"

[DebugControl]
        set !DebugOutputControl = 1
        return

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = PPC
STF_PLATFORM = Alpha
[Files-Inf]
2,        oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-DC21143]
1,DC2114XS.SYS , SIZE=999
[Files-Hlp]
[LanguagesSupported]
    ENG
[OptionsTextENG]
    DC21143  = "DC21143 PCI Fast Ethernet Adapter"
    DC21143Dock  = "DC21143 PCI Fast Ethernet (Docking) Adapter"
    DC21143Pcmcia  = "DC21143 PCI Fast Ethernet (Pcmcia) Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
                 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription  = "DC21143 Adapter Driver"

FunctionDC21143Title = "DC21143 Adapter Card Setup"
ProductHardwareDC21143Description   = "DC21143 EtherPower10/100 PCI Fast Ethernet Adapter"


ConnectionList  = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText        = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help          = "&Help"
Exit          = "Cancel"
OK            = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel        = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
          "network adapter. Select [Help] for a detailled "+
          "description of the available options of the list."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.53