; ******************************************************************* ; * ; * DESCRIPTION: OEMSETUP.INF for Etherlink III (ISA, EISA, MCA) ; * ; * HISTORY: ; * v 1.0 - Microsoft Orginal file for only elpc3 (ISA) ; * v 1.1 - Adapted to support EISA and MCA as well. ; * v 1.2 - Adapted to support Windows NT 3.5/3.51 ; * v 1.3 - Adding support for elpc3r PCMCIA Card ; * ; ******************************************************************* [Identification] OptionType = NetAdapter [PlatformsSupported] ISA ; EISA ; MCA PCMCIA "Jazz-Internal Bus" [Options] ELNK16 ELNK16B ELNK16D [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\elpc3rs.sys" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" MS_Manufacturer = "Microsoft" Manufacturer = "3Com" ProductMajorVersion = "4" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "elpc3r" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\elpc3rs.sys" NetRuleSoftwareType = "elpc3rSys ndisDriver elpc3rDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """elpc3rSys"" yes no container" NetRuleSoftwareClass = {"elpc3rDriver basic"} NetRuleSoftwareBindable = {"elpc3rDriver elpc3rAdapter non exclusive 100"} ProductHardwareName = "elpc3r" NetRuleHardwareType = "elpc3r elpc3rAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"elpc3rAdapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" MS_ProductKeyName = $(!NTN_SoftwareBase)"\"$(MS_Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" NETCARD_ID = { 25212, 25213, 25051, 25334, 25335 } [GeneralConstants] !G:DebugOutputControl = 1 from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 3, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE set StartLabel = elpc3rISA509configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the EtherLink III driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set ActivateDetection = TRUE set StartLabel = elpc3rISA509installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif set AdapterTypeValue = 256 ; set default adapter type Ifstr(i) $(Option) == ELNK16B set AdapterTypeValue = 257 else-ifstr(i) $(Option) == ELNK16D set AdapterTypeValue = 259 endif set OldOption = $(Option) Debug-Output "oemsetup.inf: ==================================================" Debug-Output "oemsetup.inf: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "oemsetup.inf: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "oemsetup.inf: Option is: "$(Option) Debug-Output "oemsetup.inf: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "oemsetup.inf: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "oemsetup.inf: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "oemsetup.inf: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "oemsetup.inf: ==================================================" Set DetectedCard = FALSE Ifstr(i) $(ActivateDetection) != TRUE Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) Endif SkipDetection = + ; Don't need to set the IOBase in install mode for ISA adapters. ; Set TypeList = {{IRQ, IRQList, IRQValue}, {IOADDR, IOADDR_Addr_List, IOBaseAddrValue}} Debug-Output "oemsetup.inf: Calling Param_BuildTypeLists" Debug-Output ">>> Option=$(Option) TypeList=$(TypeList)" set Option = ELNK16 Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList) set Option = $(OldOption); Set Status = $($R0) ifstr(i) $(Status) != STATUS_SUCCESSFUL Goto fataldetect Endif Debug-Output "oemsetup.inf: Calling Param_SetDefaults" Shell $(ParamInf) Param_SetDefaults {{IOADDR,768},{IRQ,10}} Shell $(ParamInf) HexListFromDecList $(IOADDR_Addr_List) Set IOADDR_Hex_List = $($R0) Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE Set IRQList = $($R0) Set NewList = {Auto} ForListDo $(IRQList) Set NewList = >($(NewList),$($)) EndForListDo Set IRQList = {} ForListDo $(NewList) Set IRQList = >($(IRQList),$($)) EndForListDo Set IRQValue = 0 Set NewList = {Auto} ForListDo $(IOADDR_Addr_List) Set NewList = >($(NewList),$($)) EndForListDo Set IOADDR_Addr_List = {} ForListDo $(NewList) Set IOADDR_Addr_List = >($(IOADDR_Addr_List),$($)) EndForListDo Set NewList = {Auto} ForListDo $(IOADDR_Hex_List) Set NewList = >($(NewList),$($)) EndForListDo Set IOADDR_Hex_List = {} ForListDo $(NewList) Set IOADDR_Hex_List = >($(IOADDR_Hex_List),$($)) EndForListDo ifstr(i) $(IOADDR_Addr_List) == "" Set IOBaseAddrValue = *($(IOADDR_Addr_List), 1) endif Ifstr(i) $(!STF_NCDETECT) == YES Ifstr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE Debug-Output "oemsetup.inf: Setting DetectedCard to TRUE" Endif Endif Shell "" DebugConfiguration "After parameter querying" SkipBuildTypeList = + Set from = $(fatal) Set to = $(fatal) Debug-Output "$(InfFile) $(Option): Jumping to $(StartLabel)" Goto $(StartLabel) ;******************************************************************************* ; ; Etherlink III ISA Specific routines for the this .inf file. ; ; elpc3rISA509installadapter = + Debug-Output "$(InfFile) $(Option): Installadapter" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ; @@1 ifstr(i) $(!NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif Set CurrParamSettings = {} Ifstr(i) $(DetectedCard) != TRUE Goto elpc3rISA509adaptersetup2 Endif StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto elpc3rISA509adaptersetup2 Endif Set DetectedParams = $($R1) Debug-Output "oemsetup.inf: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto elpc3rISA509adaptersetup2 elpc3rISA509configureadapter = + Debug-Output "$(InfFile) $(Option): Configureadapter" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddrValue = $(ValueData) else-ifstr(i) $(ValueName) == "InterruptNumber" set IRQValue = $(ValueData) ;Shradha else-ifstr(i) $(ValueName) == "AdapterName" set OldAdapterName = $(ValueData) Debug-Output "<DBG> AdapterName in registry = "$(OldAdapterName) ;Shradha endif EndForListDo set BusInterfaceType = 8 ; PCCARD set BusNumber = 0 ; Shell $(ParamInf) Param_SaveValues Set CurrParamSettings = $($R0) Debug-Output "CurrParamSettings: $(CurrParamSettings)" elpc3rISA509adaptersetup = + Debug-Output "$(InfFile) $(Option): AdapterSetup" Shell "" DebugConfiguration "before displaying dialog" Set from = elpc3rISA509adapteroptions Set IOADDR_Hex_Value = *($(IOADDR_Hex_List), ~($(IOADDR_Addr_List),$(IOBaseAddrValue))) Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "oemsetup.inf: parameter confidence too low to bypass configuration" Goto elpc3rISA509adapteroptions Endif elpc3rISA509adaptersetup2 = + Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto elpc3rISA509adapterverify Endif Endif elpc3rISA509adapteroptions = + Debug-Output "$(InfFile) $(Option): AdapterOptions" ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto elpc3rISA509adapterverify endif read-syms FileDependentDlg$(!STF_LANGUAGE) Debug-Output "Calling ui start..." Debug-Output "Combo1List: $(Combo1List)" Debug-Output "Combo2List: $(Combo2List)" ui start "InputDlg" Debug-Output "Leaving ui start..." Debug-Output "Combo1Out: $(Combo1Out)" Debug-Output "Combo2Out: $(Combo2Out)" ifstr(i) $(DLGEVENT) == "CONTINUE" set IOADDR_Hex_Value = $(Combo1Out) Set IOBaseAddrValue = *($(IOADDR_Addr_List), ~($(IOADDR_Hex_List),$(IOADDR_Hex_Value))) set IRQValue = $(Combo2Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else Debug-Output "Action: unknown. Bye." ui pop 1 goto end endif ;;************************************************************************************************ ;; Specific to WinNT v3.5 and above.. getbustype = + ;Shradha ;Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) ;ifint $($ShellCode) != $(!SHELL_CODE_OK) ;Debug-Output "ShellCode error." ;goto ShellCodeError ;endif ;set BusInterfaceType = $($R1) ;set BusNumber = $($R2) ;set BusInterfaceType = 1 ; force to use ISA ; The following line was already commented - Shradha ; set BusNumber = 0 ; Added the following lines - Shradha set BusInterfaceType = 1 ; force to use ISA set BusNumber = 0 ; Shradha elpc3rISA509adapterverify = + Debug-Output "$(InfFile) $(Option): Adapterverify" Shell "" DebugConfiguration "after running dialog" Ifstr(i) $(DetectedCard) != TRUE Shell $(ParamInf) Param_SaveValues Set NewParamSettings = $($R0) Debug-Output "NewParamSettings: $(NewParamSettings)" Ifstr(i) $(CurrParamSettings) == {} Set DiffParamSettings = $(NewParamSettings) Else Shell $(ParamInf) Param_DiffValues $(CurrParamSettings) Set DiffParamSettings = $($R0) Endif Debug-Output "oemsetup.inf: Calling Param_VerifyResources" Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "oemsetup.inf: Param_VerifyResources succeeded" Goto elpc3rISA509skipoptions Endif Else Set CardVerifyIndex = $(!STF_NCDETCARD) Debug-Output "oemsetup.inf: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "oemsetup.inf: Param_VerifyCard succeeded" Goto elpc3rISA509skipoptions Endif Endif Set from = elpc3rISA509adapteroptions Set to = elpc3rISA509skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning elpc3rISA509skipoptions =+ Debug-Output "$(InfFile) $(Option): SkipOptions" ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto elpc3rISA509writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto elpc3rISA509writeparameters elpc3rISA509writeparameters = + Debug-Output "$(InfFile) $(Option): Write Pcmcia database" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "CreatRegKey (3C589)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3C589",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589" $(MAXIMUM_ALLOWED) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"elpc3r"}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:elpc3r" CloseRegKey $(MyPcmciaHandle) Debug-Output "$(InfFile) $(Option): Write Pcmcia database" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle Ifstr $(MyPcmciaHandle) == $(KeyNull) Debug-Output "CreatRegKey (3C589D)" OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation" $(MAXIMUM_ALLOWED) MyPcmciaKey CreateRegKey $(MyPcmciaKey) {"3C589D",0,GenericClass} "" $(MAXIMUM_ALLOWED) "" MyPcmcialHandle CloseRegKey ($MyPcmciaKey) OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\3Com Corporation\3C589D" $(MAXIMUM_ALLOWED) MyPcmciaHandle endif set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),"elpc3r"}} Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList) Debug-Output "<DBG> AddValueList - Driver:REG_SZ:elpc3r" CloseRegKey $(MyPcmciaHandle) ;Shradha ifstr $(OldAdapterName) == "" Debug-Output "<DBG> setting OldAdapterName" set OldAdapterName = $(ProductHardwareName)$(AdapterNumber) endif Debug-Output "<DBG> OldAdapterName = "$(OldAdapterName) ;Shradha Debug-Output "$(InfFile) $(Option): Write" Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),0},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+ {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterTypeValue)},+ ;Shradha ;{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+ {SoftexPcmcia,$(NoTitle),$(!REG_VT_DWORD),1},+ {AdapterName,$(NoTitle),$(!REG_VT_SZ),$(OldAdapterName)},+ ;Shradha {OSType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf), AddDefaultNetCardParameters, $(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful ;******************************************************************************* ; ; Common routines for the entire .inf file. ; ; bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + Debug-Output "Looking at Key: "$(ProductKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct ; ; Also update if Microsoft installed the driver. ; Ifstr $(KeyProduct) == $(KeyNull) Debug-Output "Looking at Key: "$(MS_ProductKeyName) OpenRegKey $(!REG_H_LOCAL) "" $(MS_ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct endif Ifstr $(KeyProduct) != $(KeyNull) Debug-Output "Adding files to install list" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif Debug-Output "Changing Reg Version Nubmers!" SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + ; Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; goto ShellCodeError ; endif ; ifstr(i) $($R1) == "OK" goto $(to) ; else-ifstr(i) $($R1) == "CANCEL" ; goto $(from) ; else ; goto "end" ; endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [DebugConfiguration] Set InfName = "Oemsetup.INF" Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0) Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue) return [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" Debug-Output $(InfName)"Adding files: Files-$(Option), SrcDir=$(SrcDir)" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" Debug-Output $(InfName)"Adding files: Files-$(Option), SrcDir=$(SrcDir)" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "Windows NT Setup Disk #1" 2 = "Windows NT Setup CD-ROM Disk" 3 = "3Com Etherdisk for EtherLink III" [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] [Files-ELNK16] 3,elpc3rs.sys , SIZE=35328 [Files-ELNK16B] 3,elpc3rs.sys , SIZE=35328 [Files-ELNK16D] 3,elpc3rs.sys , SIZE=35328 [LanguagesSupported] ENG [OptionsTextENG] ELNK16 = "3Com EtherLink III (3C589) LAN PC Card" ELNK16B = "3Com EtherLink III (3C589B/C) LAN PC Card" ELNK16D = "3Com EtherLink III (3C589D) LAN PC Card" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "3Com EtherLink III PC Card" ProductSoftwareDescription = "3Com EtherLink III PC Card Driver" ProductSoftwareTitle = "3Com EtherLink III PC Card Driver" ProductHardwareELNK16Title = "3Com EtherLink III (3C589) LAN PC Card" ProductHardwareELNK16Description = "3Com EtherLink III (3C589) LAN PC Card" ProductHardwareELNK16BTitle = "3Com EtherLink III (3C589B/C) LAN PC Card" ProductHardwareELNK16BDescription = "3Com EtherLink III (3C589B/C) LAN PC Card" ProductHardwareELNK16DTitle = "3Com EtherLink III (3C589D) LAN PC Card" ProductHardwareELNK16DDescription = "3Com EtherLink III (3C589D) LAN PC Card" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Label1 = "I/O &Port Address:" Label2 = "&Interrupt Number:" DlgType = "Combination" DlgTemplate = "NE2000" Caption = $(FunctionTitle) Combo1List = $(IOADDR_Hex_List) Combo1Out = $(IOADDR_Hex_Value) Combo2List = $(IRQList) Combo2Out = $(IRQValue) ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} NotifyFields = {NO, NO, NO} HelpContext = $(!IDH_DB_OEMNADE3_INS)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.