1. nt3_1.exe Driver
  2. oemsetup.inf File Contents

oemsetup.inf Driver File Contents (nt3_1.exe)

;*******************************************************************************
;*                                                                            **
;*                     I N T E L   P R O P R I E T A R Y                      **
;*                                                                            **
;*   COPYRIGHT (c) 1993-1999 BY INTEL CORPORATION. ALL RIGHTS RESERVED.  NO   **
;*   PART  OF  THIS  PROGRAM OR PUBLICATION MAY BE REPRODUCED, TRANSMITTED,   **
;*   TRANSCRIBED, STORED IN A RETRIEVAL  SYSTEM,  OR  TRANSLATED  INTO  ANY   **
;*   LANGUAGE OR COMPUTER LANGUAGE IN ANY FORM OR BY ANY MEANS, ELECTRONIC,   **
;*   MECHANICAL, MAGNETIC, OPTICAL, CHEMICAL, MANUAL, OR OTHERWISE, WITHOUT   **
;*   THE PRIOR WRITTEN PERMISSION OF :                                        **
;*                                                                            **
;*                             INTEL CORPORATION                              **
;*                                                                            **
;*                          2200 MISSON COLLEGE BLVD                          **
;*                                                                            **
;*                     SANTA CLARA, CALIFORNIA 95052-8119                     **
;*                                                                            **
;*******************************************************************************
;***********************************************************************
; Windows NT OEMSETUP.INF for
;
;               Intel(R) PRO/100+ PCI Adapter
;
; Copyright© 1994-1999 Intel Corporation.  All rights reserved.
;***********************************************************************
; $Revision: 1 $
;
;***********************************************************************
; Define constants
;***********************************************************************
[FileConstants]
        Manufacturer  = "Intel"
        ModemEnabler  = "Cbmodem.sys"
        NDIS3         = "E100b.sys"
        NDIS4         = "E100bnt.sys"
        IAFT          = "iAFT.sys"
        IVLAN         = "iVLAN.sys"
        PROSet        = "PROSetp.cpl"
        PROMon        = "PROMon.exe"
        PROKdd        = "PROKddp.sys"
        PROdd         = "PROdd.sys"
        PROSetHelp    = "PROSetp.hlp"
        PROSetCnt     = "PROSetp.cnt"
        PROSetOld     = "PROSet.cpl"

        ProCaption   = "Windows NT Setup"
        ProCancel    = "Cancel"
        ProCancelMsg = "Windows NT Networking is not correctly installed.  " +
                        "Are you sure you want to cancel copying files?"
        ProCancelCap = "Network Setup Message"
        ProText1     = "Copying:"
        ProText2     = "To:"

;***********************************************************************
; Define file source constants.
;***********************************************************************
[FileConstants-Src]
        ModemEnablerSrc = "Cbmodem.sys"
        NDIS3Src        = "E100b.sys"
        NDIS4Src        = "E100bnt.sys"
        IAFTSrc         = "iAFT.sys"
        IVLANSrc        = "iVLAN.sys"
        PROSetSrc       = "PROSetp.cpl"
        PROMonSrc       = "PROMon.exe"
        PROKddSrc       = "PROKddp.sys"
        PROddSrc        = "PROdd.sys"
        PROSetHelpSrc   = "PROSetp.hlp"
        PROSetCntSrc    = "PROSetp.cnt"

;***********************************************************************
; Detect sections
;***********************************************************************
[DetectConstants]
OSName = {} ? $(PROSet) GetOSVersion

;***********************************************************************
; Define Option
;***********************************************************************
[Options]
        E100B
        E100BEXP
        E100BPCI
        E10PPCI
        E100BRWA

[OptionsText]
        E100B = "Intel(R) PRO Adapter"

[Source Media Descriptions]
        1 = "Intel PRO Adapter CD-ROM or floppy disk", TAGFILE = d100disk

;***********************************************************************
; Returns information to Setup about the type of driver or drivers that
; can be installed by this INF file.
;***********************************************************************
[Identify]
        Return STATUS_SUCCESSFUL NetAdapter ""

;***********************************************************************
; This section returns information to the Setup program, listing the
; names of any drivers that can be installed by this INF file. It also
; returns the text strings for each driver (in the requested language)
; to be used in the dialog box that asks the user to select the driver
; to install.
;***********************************************************************
[ReturnOptions]
        Set Status         = STATUS_SUCCESSFUL
        Set OptionList     = ^(Options, 1)
        Set OptionTextList = ^(OptionsText, 1)

        IfStr(i) $($1) != ""
                IfContains(i) $($1) not-in "PCI"
                        Set Status         = STATUS_NOTSUPPORTED
                        Set OptionList     = {}
                        Set OptionTextList = {}
                EndIf
        EndIf

        Return $(Status) $(OptionList) $(OptionTextList)

;***********************************************************************
; Driver History Information
; The following code adds Driver History Information to the system registry
;***********************************************************************
[DriverHistory]
        ; Driver Information Entries
        ; These items will be set by IHV...

        ; IHV name
        Set DriverMfgr = "Intel"

        ; The IHV driver package version
        Set DriverVersionID = "3.1"

        ; These items will be set to VENDOR values, and then set to OEM-specific by OEM

        ; name of the OEM
        Set DriverOEM = "Dell"

        ; device family (NIC, Storage, Video...)
        Set DriverFamily = "Network"

        ; Specific Name of device (chipset, for example)
        Set DriverProduct = "Intel EtherExpress Family Adapter"

        ; Description of device (product name, OS or system supported)
        Set DriverDescription = "Intel PRO-10+/PRO-100B/PRO-100+/PRO-100+ Dual Port Adapter driver for NT 4.0"

        ; OEM-specified version
        Set DriverOEMVersion = "A01"

        ; OEM-specified driver file name
        Set BaseDriverFileName = "E100BNT.SYS"

        ; OEM-specified driver file version
        Set BaseDriverFileVersion = "3.36.10.0325"

        ; This section is added to all INFs to add registry entries for Driver Info.

        Set DriverInfoRegList = {"InstalledOptions",$(DriverOEM),$(DriverFamily),$(DriverMfgr),$(DriverProduct)}
        Set DriverInfoKey = "SOFTWARE"
        OpenRegKey $(!REG_H_LOCAL) "" $(DriverInfoKey) $(!REG_KEY_CREATE_SUB_KEY) DriverInfoOldKeyHandle
        Ifstr $(DriverInfoOldKeyHandle) == ""
                Shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "DriverInfo registry failed. Could not open HKLM\Software ("$(RegLastError)")"
                Set DriverInfoFailed = "FAIL"
        Else
                ForListDo $(DriverInfoRegList)
                        Set NewDriverInfoKey = $(DriverInfoKey)"\"$($)
                        OpenRegKey $(!REG_H_LOCAL) "" $(NewDriverInfoKey) $(!REG_KEY_ALL_ACCESS) DriverInfoKeyHandle
                        Ifstr(i) $(DriverInfoKeyHandle) == ""
                                CreateRegKey $(DriverInfoOldKeyHandle) {$($),0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" DriverInfoKeyHandle
                                Ifstr $(DriverInfoKeyHandle) == ""
                                        Shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "DriverInfo registry failed. Could not create key:"$($)" ("$(RegLastError)")"
                                        Set DriverInfoFailed = "FAIL"
                                Endif
                        Endif
                        CloseRegKey $(DriverInfoOldKeyHandle)
                        Set DriverInfoOldKeyHandle = $(DriverInfoKeyHandle)
                        Set DriverInfoKey = $(NewDriverInfoKey)
                EndForListDo
        Endif

        Ifstr $(DriverInfoFailed) != "FAIL"
                SetRegValue $(DriverInfoKeyHandle) {"Description",0,$(!REG_VT_SZ),$(DriverDescription)}
                SetRegValue $(DriverInfoKeyHandle) {"CurrentVer",0,$(!REG_VT_SZ),$(DriverOEMVersion)}
                SetRegValue $(DriverInfoKeyHandle) {"Ver_"$(DriverOEMVersion),0,$(!REG_VT_SZ),$(DriverVersionID)}
                SetRegValue $(DriverInfoKeyHandle) {"BaseDriverFileName",0,$(!REG_VT_SZ),$(BaseDriverFileName)}
                SetRegValue $(DriverInfoKeyHandle) {"BaseDriverFileVersion",0,$(!REG_VT_SZ),$(BaseDriverFileVersion)}
                CloseRegKey $(DriverInfoKeyHandle)
        Endif

        Return

;***********************************************************************
; End of Driver History Information
;***********************************************************************

;***********************************************************************
; If the [ReturnOptions] section returns successfully, indicating the
; language is supported, Setup displays a dialog box from which the user
; can select a driver to install. If the user proceeds with the
; installation, Setup calls the [InstallOption] section.
;***********************************************************************
[InstallOption]
        Set Option   = $($1)
        Set SrcDir   = $($2)
        Set AddCopy  = $($3)
        Set DoCopy   = $($4)
        Set DoConfig = $($5)

        read-syms FileConstants
        read-syms FileConstants-Src

        IfStr(i) $(!NTN_InstallMode) == deinstall
                Set StartLabel = RemoveAdapter

        Else-IfStr(i) $(!NTN_InstallMode) == update
                Set StartLabel = UpdateAdapters

        Else-IfStr(i) $(!NTN_InstallMode) == bind
                Set StartLabel = BindingReview

        Else-IfStr(i) $(!NTN_InstallMode) == configure
                Set StartLabel = ConfigureAdapter

        Else-IfStr(i) $(!NTN_InstallMode) == install
                Set StartLabel = InstallAdapters

        EndIf

        Set from = FatalError
        Set to   = FatalError

        Goto $(StartLabel)

;***********************************************************************
; Called when the user clicks the Add button in the NCPA.
;***********************************************************************
InstallAdapters = +

        Install "Install-PROSet"

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) InstallAdapters +
                $(Option), $(PROMon), $(STF_CONTEXTINFNAME), +
                $(!NetCardParameterName), $(!NetCardParameterValue), +
                $(!STF_GUI_UNATTENDED)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "ERROR"
                return STATUS_USERCANCEL
        EndIf

        detect DetectConstants

        Install "Install-Option"
        Install "Install-PROSet-More"

        Shell "", DriverHistory

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when the user clicks the Update button in the NCPA.
;***********************************************************************
UpdateAdapters = +

        Install "Install-PROSet"

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) UpdateAdapters +
                $(PROMon), $(!NTN_RegBase)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "ERROR"
                return STATUS_USERCANCEL
        EndIf

        Set NewInfName = $(DllExitStr)

        detect DetectConstants

        Install "Install-Option"
        Install "Install-PROSet-More"

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when the binding engine runs and the software component has a
; Review = 1 flag in the CurrentVersion key of the software component
; key.
;***********************************************************************
BindingReview = +

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) BindingReview $(Option)
        FreeLibrary $(hLib)

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when user clicks the Remove button on the NCPA to remove an
; adapter.  We only need to remove the hardware components; the NCPA
; will remove the software component when the last hardware component
; is removed.  This function is also used to remove adapter teams.
;***********************************************************************
RemoveAdapter = +

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) RemoveAdapter +
                $(Option), $(!NTN_RegBase)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "CLEANUP"
                Install "Install-Cleanup"
                Install "Install-PROMon-Cleanup"
        EndIf

        return STATUS_SUCCESSFUL

;***********************************************************************
; Called when the user selects Properties button on an adapter.
;***********************************************************************
ConfigureAdapter = +

        LoadLibrary "" $(PROSet) hLib
        LibraryProcedure DllExitStr $(hLib) DLLEntry +
                $(!NTN_RegBase), $(Option)
        FreeLibrary $(hLib)

        Ifstr(i) $(DllExitStr) == "REBOOT"
                return STATUS_SUCCESSFUL
        EndIf

        return STATUS_USERCANCEL

;***********************************************************************
; Something's busted!
;***********************************************************************
FatalError = +

        return STATUS_FAILED


;***********************************************************************
; Install the PROSet files.
;***********************************************************************
[Install-PROSet]
        Set STF_VITAL = 1
        Set STF_OVERWRITE        = "VERIFYSOURCEOLDER"

        AddSectionFilesToCopyList Files-PROSet-Drivers $(SrcDir) +
                $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-PROSet-System $(SrcDir) +
                $(!STF_WINDOWSSYSPATH)

        Set !STF_NCPA_FLUSH_COPYLIST = 1
        CopyFilesInCopyList

        Exit

[Files-PROSet-Drivers]
        1, $(PROKddSrc),     SIZE=50000, RENAME=$(PROKdd)
        1, $(PROddSrc),      SIZE=50000, RENAME=$(PROdd)

[Files-PROSet-System]
        1, $(PROSetSrc),     SIZE=50000, RENAME=$(PROSet)
        1, $(PROMonSrc),     SIZE=50000, RENAME=$(PROMon)
        1, $(PROSetHelpSrc), SIZE=50000, RENAME=$(PROSetHelp)
        1, $(PROSetCntSrc),  SIZE=50000, RENAME=$(PROSetCnt)

;***********************************************************************
; Finish up the install of PROSet
;***********************************************************************
[Install-PROSet-More]

        ; Install PROMon to run each time NT 4 starts
        IfStr(i) $(OSName) == "NT4"
                OpenRegKey $(!REG_H_LOCAL) "" +
                        "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
                        $(!REG_KEY_SET_VALUE) KeyWinRun
                SetRegValue $(KeyWinRun) {$(PROMon), 0, $(!REG_VT_SZ), $(PROMon)}
                CloseRegKey $(KeyWinRun)
        EndIf

        ; Remove Old PROSet
        AddFileToDeleteList $(PROSetOld)

        Exit

;***********************************************************************
; Remove PROMon hook
;***********************************************************************
[Install-PROMon-Cleanup]

        OpenRegKey $(!REG_H_LOCAL) "" +
                "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
                $(!REG_KEY_SET_VALUE) KeyWinRun
        DeleteRegValue $(KeyWinRun) $(PROMon)
        CloseRegKey $(KeyWinRun)

        Exit

;***********************************************************************
; Install the Option files.
;***********************************************************************
[Install-Option]
        Set STF_VITAL = 1
        Set STF_OVERWRITE = "VERIFYSOURCEOLDER"

        ; Prior to installing the drivers, lets see if the install media has the AFT
        ; driver and the VLAN driver.

        IfStr(i) $(OSName) == "NT4"
                set FileToCheck = $(SrcDir)$(ModemEnablerSrc)
                LibraryProcedure ModemEnablerFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
                set FileToCheck = $(SrcDir)$(IAFTSrc)
                LibraryProcedure AftFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)
                set FileToCheck = $(SrcDir)$(IVLANSrc)
                LibraryProcedure VlanFilePresent,$(!LIBHANDLE), CheckFileExistance $(FileToCheck)

                Ifstr(i) $(ModemEnablerFilePresent) == "YES"
                        AddSectionFilesToCopyList Files-Option-Drivers-NT4-ModemEnabler $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
                Endif

                Ifstr(i) $(AftFilePresent) == "YES"
                        AddSectionFilesToCopyList Files-Option-Drivers-NT4-Aft $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
                Endif

                Ifstr(i) $(VlanFilePresent) == "YES"
                        AddSectionFilesToCopyList Files-Option-Drivers-NT4-Vlan $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
                Endif
        Endif

        Set FilesOptionDrivers = "Files-Option-Drivers-"$(OSName)

        AddSectionFilesToCopyList $(FilesOptionDrivers) $(SrcDir) +
                $(!STF_WINDOWSSYSPATH)\drivers

        IfStr(i) $(NewInfName) != ""
                AddSectionFilesToCopyList Files-Option-Inf $(SrcDir) +
                        $(!STF_WINDOWSSYSPATH)
        EndIf

        Set !STF_NCPA_FLUSH_COPYLIST = 1
        CopyFilesInCopyList

        Exit

[Files-Option-Drivers-NT351]
        1, $(NDIS3Src), SIZE=50000, RENAME=$(NDIS3)

[Files-Option-Drivers-NT4]
        1, $(NDIS4Src), SIZE=50000, RENAME=$(NDIS4)

[Files-Option-Drivers-NT4-ModemEnabler]
        1, $(ModemEnablerSrc), SIZE=50000, RENAME=$(ModemEnabler)

[Files-Option-Drivers-NT4-Aft]
        1, $(IAFTSrc),  SIZE=50000, RENAME=$(IAFT)

[Files-Option-Drivers-NT4-Vlan]
        1, $(IVLANSrc), SIZE=50000, RENAME=$(IVLAN)

[Files-Option-Inf]
        1, OEMSETUP.INF,   SIZE=50000, RENAME=$(NewInfName), +
                OVERWRITE=ALWAYS

;***********************************************************************
; Clean system of adapter files.
;***********************************************************************
[Install-Cleanup]

        AddFileToDeleteList drivers\$(NDIS3)
        AddFileToDeleteList drivers\$(NDIS4)
        AddFileToDeleteList drivers\$(IAFT)
        AddFileToDeleteList drivers\$(IVLAN)

        AddFileToDeleteList $(PROSet)
        AddFileToDeleteList $(PROMon)
        AddFileToDeleteList drivers\$(PROKdd)
        AddFileToDeleteList drivers\$(PROdd)
        AddFileToDeleteList $(PROSetHelp)
        AddFileToDeleteList $(PROSetCnt)

        Exit
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 0.98